9 Dec
2021
9 Dec
'21
5:23 p.m.
About the software:
I bought a couple of that seller's cards; one each of 284088568161 &
284088570014.
Asked him about the software. Here's his reply.
========
Regarding your question about the Analyzer software, if I recall correctly it comes
bundled in the "NI-488.2" software package. I believe the version in my
screenshot in the eBay listing was v17.6 for Win7 SP1 x86, but it should still be fully
supported in the newest v21.0 package for x86 or x64 systems.
https://www.ni.com/en-us/support/downloads/drivers/download.ni-488-2.html
LabVIEW version compatibility matrix:
https://www.ni.com/en-us/support/documentation/compatibility/17/ni-488-2-an…
========
All new to me.
Now to hunt manuals for the cards.
Guy
At 12:33 PM 9/12/2021 -0800, you wrote:
On Wed, Dec 8, 2021 at 10:50 PM Rodney Brown via
cctalk
<cctalk at classiccmp.org> wrote:
NI National Instruments PCI-GPIB+ Analyzer PCI IEEE488.2 Interface Card
While a photo shows the Windows NI Analyzer software in use, the item
doesn't mention it.
If NI will provide the analyzer software, these could be used to capture
HP-IB traffic to characterize the attached devices, timings etc.
Has anyone recently installed and used the NI GPIB Analyzer software?
Is that something that must be obtained and installed separately, or
is it included as an optional component of the standard NI-488.2
download and installation?
I suppose I could try downloading and installing the 1.19 GB current
21.0.0 version of the NI-488.2 software to take a look. The current
21.0.0 version of NI-VISA is another 1.11 GB download.
10 Dec
10 Dec
9:30 p.m.
On Thu, Dec 9, 2021 at 2:26 PM Guy Dunphy via cctalk
<cctalk at classiccmp.org> wrote:
About the software:
I bought a couple of that seller's cards; one each of 284088568161 &
284088570014.
Asked him about the software. Here's his reply.
========
Regarding your question about the Analyzer software, if I recall correctly it comes
bundled in the "NI-488.2" software package. I believe the version in my
screenshot in the eBay listing was v17.6 for Win7 SP1 x86, but it should still be fully
supported in the newest v21.0 package for x86 or x64 systems.
I was curious enough that I also picked up a PCI-GPIB+, one of the
newer versions and apparently the current version, same version as
item 284088570014 instead of the earlier version as item 284088568161.
The two versions might be functionally equivalent, maybe it was just a
redesign for cost reduction and/or some components of the design
reaching end of production status.
When I receive the PCI-GPIB+ I'll have to see if I can get it up and
running with the analyzer software.
1037
days inactive
1039
days old
1 comments
2 participants
participants (2)
-
glen.slick＠gmail.com -
guykd＠optusnet.com.au