22 Aug
2000
22 Aug
'00
8:17 a.m.
Can anyone help this guy?
Reply-to: blingvall(a)swipnet.se
---------- Forwarded message ----------
Date: Tue, 22 Aug 2000 19:16:00 +0200
From: "[iso-8859-1] Björn Lingvall" <blingvall(a)swipnet.se>
To: vcf(a)vintage.org
Subject: driver-request
Hi!
I´ve have an old Fujitsu matrix-printer model M3349B, but I can´t find any driver.
My question is, do you know anyone who`ve got drivers for that printer?
I would be very happy.
blingvall(a)swipnet.se
Sellam International Man of Intrigue and Danger
-------------------------------------------------------------------------------
Looking for a six in a pile of nines...
VCF 4.0 is September 30-October 1
San Jose Convention Center, San Jose, California
See http://www.vintage.org for details!
22 Aug
22 Aug
4:46 a.m.
Many of the old Fujitsu printers work with drivers from other
manufacturers. I own a Fujitsu DPMG9 and I could not locate a driver for
it, but it runs fine on either an Epson FX-80 or Epson LX-850+ driver, I
don't know about the M3349B, but maybe the same will work. If not, do you
still have the manual for the printer? If so, I might be able to assist
you in finding a compatible driver. Also, some technical specifications
might help.
Ciao,
Lionel
On Tue, 22 Aug 2000, Vintage Computer Festival wrote:
Can anyone help this guy?
Reply-to: blingvall(a)swipnet.se
---------- Forwarded message ----------
Date: Tue, 22 Aug 2000 19:16:00 +0200
From: "[iso-8859-1] Björn Lingvall" <blingvall(a)swipnet.se>
To: vcf(a)vintage.org
Subject: driver-request
Hi!
I´ve have an old Fujitsu matrix-printer model M3349B, but I can´t find any driver.
My question is, do you know anyone who`ve got drivers for that printer?
I would be very happy.
blingvall(a)swipnet.se
Sellam International Man of Intrigue and Danger
-------------------------------------------------------------------------------
Looking for a six in a pile of nines...
VCF 4.0 is September 30-October 1
San Jose Convention Center, San Jose, California
See http://www.vintage.org for details!
11:04 a.m.
Well, my first question would be "drivers for what?"
Seriously though, what little information I can find suggests this printer
is compatible with one of the epson models - I'd try mx80 and fx80 first, and
proceed through the epson drivers until I'd exhausted them or found one that
does the job.
-Jim
Can anyone help this guy?
Reply-to: blingvall(a)swipnet.se
---------- Forwarded message ----------
Date: Tue, 22 Aug 2000 19:16:00 +0200
From: "[iso-8859-1] Bj?rn Lingvall" <blingvall(a)swipnet.se>
To: vcf(a)vintage.org
Subject: driver-request
Hi!
I?ve have an old Fujitsu matrix-printer model M3349B, but I can?t find any driver.
My question is, do you know anyone who`ve got drivers for that printer?
I would be very happy.
blingvall(a)swipnet.se
Sellam International Man of Intrigue and Danger
-------------------------------------------------------------------------------
Looking for a six in a pile of nines...
VCF 4.0 is September 30-October 1
San Jose Convention Center, San Jose, California
See http://www.vintage.org for details!
--
Jim Strickland
jim(a)DIESPAMMERSCUMcalico.litterbox.com
-----------------------------------------------------------------------
BeOS Powered!
-----------------------------------------------------------------------
2:09 p.m.
New subject: Old printer ribbons
I once bought a Toshiba P351C (which I still have, but still don't use) that
uses about 1" high ribbons, either four-color or black. Though I got this
printer new, once I had used up the two ribbons I had, I was forced to stop
using it by the lack of available ribbons.
Toshiba never even sent me the "free" ribbon to which a coupon included with
the printer claimed to entitle me and which Toshiba's representative
promised to send me. Does anybody have a clue as to where one can get
ribbons for this beastie? I'm not even sure it works any longer, but I
would like to use it with an old CP/M system.
Dick
24 Aug
24 Aug
7:49 p.m.
New subject: Old printer ribbons
Dick,
I used to have printer that I THINK was a Citizen GSX-something. It
sounds like it used the same ribbons. It came with a black ribbons but you
could buy some kind of upgrade that changed it to a color printer and then
you had to install a four color ribbon. You might check and see if the
Citizen used the same ribbon as your Toshiba.
Joe
At 05:09 PM 8/22/00 -0600, you wrote:
I once bought a Toshiba P351C (which I still have, but
still don't use) that
uses about 1" high ribbons, either four-color or black. Though I got this
printer new, once I had used up the two ribbons I had, I was forced to stop
using it by the lack of available ribbons.
Toshiba never even sent me the "free" ribbon to which a coupon included with
the printer claimed to entitle me and which Toshiba's representative
promised to send me. Does anybody have a clue as to where one can get
ribbons for this beastie? I'm not even sure it works any longer, but I
would like to use it with an old CP/M system.
Dick
8728
days inactive
8730
days old
4 comments
5 participants
participants (5)
-
jim＠calico.litterbox.com -
lionelp＠worldonline.co.za -
richard＠idcomm.com -
rigdonj＠intellistar.net -
vcf＠siconic.com