15 Jan
2014
15 Jan
'14
4:32 p.m.
I have a couple of Intel 8080A based MDS systems available. You can see them at:
http://fsironworks.com/images/MDS.jpg
http://fsironworks.com/images/MDS.1.jpg
http://fsironworks.com/images/MDS.2.jpg
One MDS (the open one) has an 8080A processor card, four memory cards,
a front panel controller, a floppy channel card and a floppy interface
card. The other MDS has no cards, and no panel either. There are two
dual 8 inch floppy units.
The front panel is pretty decent, but the paint on the cabinets shows
typical wear and such.
I have not tested these, and I have no floppies or docs for it.
Interested? Please send me an email - maybe make an offer.
--
Will, in 10512
15 Jan
15 Jan
6:43 p.m.
Hi Will
I'm not expecting to buy these but for those that might want
to, can you look inside the main boxes and see what the numbers are
on the floppy controllers.
Many might like to know if these are single density or M2FM.
The made a two card set for each of these.
Dwight
Date: Wed, 15 Jan 2014 16:32:18 -0500
Subject: Intel stuff for sale
From: wdonzelli at gmail.com
To: cctalk at classiccmp.org
I have a couple of Intel 8080A based MDS systems available. You can see them at:
http://fsironworks.com/images/MDS.jpg
http://fsironworks.com/images/MDS.1.jpg
http://fsironworks.com/images/MDS.2.jpg
One MDS (the open one) has an 8080A processor card, four memory cards,
a front panel controller, a floppy channel card and a floppy interface
card. The other MDS has no cards, and no panel either. There are two
dual 8 inch floppy units.
The front panel is pretty decent, but the paint on the cabinets shows
typical wear and such.
I have not tested these, and I have no floppies or docs for it.
Interested? Please send me an email - maybe make an offer.
--
Will, in 10512
7:21 p.m.
Il giorno mer, 15/01/2014 alle 16.32 -0500, William Donzelli ha scritto:
I have a couple of Intel 8080A based MDS systems
available. You can see them at:
http://fsironworks.com/images/MDS.jpg
http://fsironworks.com/images/MDS.1.jpg
http://fsironworks.com/images/MDS.2.jpg
One MDS (the open one) has an 8080A processor card, four memory cards,
a front panel controller, a floppy channel card and a floppy interface
card. The other MDS has no cards, and no panel either. There are two
dual 8 inch floppy units.
The front panel is pretty decent, but the paint on the cabinets shows
typical wear and such.
I have not tested these, and I have no floppies or docs for it.
Interested? Please send me an email - maybe make an offer.
--
Will, in 10512
Location?
7:46 p.m.
the zip at the bottom in his signiture says Carmel, NY 10512, USA
On Wed, Jan 15, 2014 at 6:21 PM, supervinx <supervinx at libero.it> wrote:
Il giorno mer, 15/01/2014 alle 16.32 -0500, William
Donzelli ha scritto:
I have a couple of Intel 8080A based MDS systems
available. You can see
them at:
http://fsironworks.com/images/MDS.jpg
http://fsironworks.com/images/MDS.1.jpg
http://fsironworks.com/images/MDS.2.jpg
One MDS (the open one) has an 8080A processor card, four memory cards,
a front panel controller, a floppy channel card and a floppy interface
card. The other MDS has no cards, and no panel either. There are two
dual 8 inch floppy units.
The front panel is pretty decent, but the paint on the cabinets shows
typical wear and such.
I have not tested these, and I have no floppies or docs for it.
Interested? Please send me an email - maybe make an offer.
--
Will, in 10512
Location?
8:44 p.m.
has a mds225 myself that i think needs to be recaped
On Wed, Jan 15, 2014 at 7:15 PM, supervinx <supervinx at libero.it> wrote:
Il giorno mer, 15/01/2014 alle 18.46 -0600, Adrian
Stoness ha scritto:
the zip at the bottom in his signiture says
Carmel, NY 10512, USA
Thanks!
I guessed but I wasn't sure...
Too far :(
10:13 p.m.
I'm interested, but I have no idea of a right pricing. I run a small museum
in Google's NYC office, where I'm trying to acquire some interesting
machines. These would be a stretch, because I would have to restore them
and get some software running before they are displayable.
Do you have a ballpark of what you are expecting?
-tony
On Wed Jan 15 2014 at 4:37:23 PM, William Donzelli <wdonzelli at gmail.com>
wrote:
I have a couple of Intel 8080A based MDS systems
available. You can see
them at:
http://fsironworks.com/images/MDS.jpg
http://fsironworks.com/images/MDS.1.jpg
http://fsironworks.com/images/MDS.2.jpg
One MDS (the open one) has an 8080A processor card, four memory cards,
a front panel controller, a floppy channel card and a floppy interface
card. The other MDS has no cards, and no panel either. There are two
dual 8 inch floppy units.
The front panel is pretty decent, but the paint on the cabinets shows
typical wear and such.
I have not tested these, and I have no floppies or docs for it.
Interested? Please send me an email - maybe make an offer.
--
Will, in 10512
11:03 p.m.
I'm interested, but I have no idea of a right
pricing. I run a small museum
in Google's NYC office, where I'm trying to acquire some interesting
machines. These would be a stretch, because I would have to restore them
and get some software running before they are displayable.
I should mention that anyone interested in the Intel stuff does not
have to buy the whole pile, but I would like to keep one drive box
with the good main box.
Do you have a ballpark of what you are expecting?
Send me an email offlist.
--
Will
16 Jan
16 Jan
9:32 a.m.
Oh, I also noticed that one of the pictures is pretty crappy. I will
try to reshoot it today or tomorrow.
--
Will
3846
days inactive
3847
days old
8 comments
5 participants
participants (5)
-
dkelvey＠hotmail.com -
supervinx＠libero.it -
tdk.knight＠gmail.com -
tony.aiuto＠gmail.com -
wdonzelli＠gmail.com