7 Jul
2019
7 Jul
'19
7:31 a.m.
From: Nigel Johnson
Anybody have any docs on the DEC LSI 11/93 (KDJ11-E)?
Info on the -E is thin on the ground. The User's Manual (EK-KDJ1E-UG-001)
is available online, though, which is a start - it gives info on how to
configure it, etc.
I am trying to run it in a BA23 backplane and
seemingly geting bus
hangs as is there is something that it is looking for that is not
there!
QBUS 11's are pretty resistant to hangs, unless you have an interrupted
grant chain. A simple missing device should give a NXM fault.
I"d try getting the whole system working with another CPU, and then plug in
the -E; reduce the number of unknown variables. Although with memory and
console line on-board on the -E, it shouldn't need too much else for at least
basic functioning.
Noel
7 Jul
7 Jul
8:06 a.m.
Thanks for the reply, Noel,
On 07/07/2019 10:31, Noel Chiappa wrote:
Yes, I have that manual. Thanks.
Yes, I have checked the grant chain. No problems there.? I started out
with just the processor anyway.? It seems that the firmware is trying to
access something from the system it came from, which isn't there.? I
have tried all boot device settings, as well as direct into dialogue
mode, and it always clears the screen and homes cursor, but never gets
past that point.? The run light comes out whenever it gets to the
dialogue mode whether I go throug hthe diagnostics or not.? It passes
all the diagnostics.
I am connecting a terminal (Tried all types that Pathworks Powerterm 525
will emulate, as well as putty,minicom, and kermit) via a made-up cable,
looping all te other ports.? I am suspicious that the console cab kit
(which I don't have) needs +5 and +12 so I am wondering if the firmware
is waiting for some kind of handshake.? I wonder if anybody else out
there can advise.
From: Nigel
Johnson
Anybody have any docs on the DEC LSI 11/93 (KDJ11-E)?
Info on the -E is thin on the ground. The User's Manual (EK-KDJ1E-UG-001)
is available online, though, which is a start - it gives info on how to
configure it, etc. I am trying to
run it in a BA23 backplane and seemingly geting bus
hangs as is there is something that it is looking for that is not
there!
QBUS 11's are pretty resistant to hangs, unless you have an interrupted
grant chain. A simple missing device should give a NXM fault.
I"d try getting the whole system working with another CPU, and then plug in
the -E; reduce the number of unknown variables. Although with memory and
console line on-board on the -E, it shouldn't need too much else for at least
basic functioning.
It would be a great idea if I had one. Somehow I went on a mad frenzy to
clear out extra stock from my storage area years ago and got rid of the
last one, thinking that there was one still inside the backplane!
cheers,
NIgel
Noel
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it
will pass across the public Internet, easily readable by any number of system
administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this message
1956
days inactive
1956
days old
1 comments
2 participants
participants (2)
-
jnc＠mercury.lcs.mit.edu -
nw.johnson＠ieee.org