12 Jul
1997
12 Jul
'97
7:52 a.m.
I have the oportunity to aquire an IBM System 36 model 5364 with manuals
and operating disks, all in working condition. My question is, I have never
heard of this system (the 360/370, yes). What can I expect?
Secondly, from the same source, I can get a Compac Portable I XT with
harddrive and memory upgrade, ethernet 3/comm and AST 5250 emulation (some
mainframe terminal?), again all in working condition, but from what I hear,
it's portable in the term that yes, you can lug the entire setup.
Third, for anyone that is interested (you pay shipping, plus maybe a few
extra bucks - whatever you think it's worth) the following are also
available:
10M HD for an IBM 360
Monroe (possible) "bookkeeping machine"
Underwood typewriter (manual)
(unknown) manual adding machine
I'll be hearing more about this stuff on Monday.
-spc (Is getting more stuff than he knows what to do with ... )
12 Jul
12 Jul
5:39 p.m.
I have the oportunity to aquire an IBM System 36
model 5364 with manuals
and operating disks, all in working condition. My question is, I have never
heard of this system (the 360/370, yes). What can I expect?
Good hardware, horrible software (typical IBM). I am still fighting with
the 5363 III at RCS/RI.
The S/36 is a minicomputer, not compatible with the 360/370 line.
Third, for anyone that is interested (you pay
shipping, plus maybe a few
extra bucks - whatever you think it's worth) the following are also
available:
10M HD for an IBM 360
Do you have a part number (a four digit thing)?
Also, where is it located (my interest, or rather feasibility, drops
after several hundred miles - in any case, I am interested). If it is for a
360, it will be large.
Tell us more.
William Donzelli
william(a)ans.net
7:59 p.m.
It was thus said that the Great William Donzelli once stated:
While the software IBM sells is often not worth the media it's distributed
on, the software used internally is often very good (at least it was for the
PC stuff). I still use an Internal Use Only editor written for PC-DOS 1.x
in 1982, version 1.0 (no bugs, very small, programmable, can edit multiple
files, etc etc).
I'll have the info on Tuesday (Monday maybe).
I have the oportunity to aquire an IBM System
36 model 5364 with manuals
and operating disks, all in working condition. My question is, I have never
heard of this system (the 360/370, yes). What can I expect?
Good hardware, horrible software (typical IBM). I am still fighting with
the 5363 III at RCS/RI.
The S/36 is a minicomputer, not compatible with the
360/370 line.
It isn't? I was talking to a friend that said it could run 360/370
software. I guess I'll find out when I get it.
Third, for
anyone that is interested (you pay shipping, plus maybe a few
extra bucks - whatever you think it's worth) the following are also
available:
10M HD for an IBM 360
Do you have a part number (a four digit thing)? Also, where is it located (my interest, or rather
feasibility, drops
after several hundred miles - in any case, I am interested). If it is for a
360, it will be large.
Somewhere near Boca Raton, home of the IBM PC (and for those still unwise
int he ways of U.S. geography, just north of Ft. Lauderdale, which is just
north of Miami, Fl).
Tell us more.
I will, when I get more information.
-spc (Oh good, at least someone heard of it 8-)
13 Jul
13 Jul
5:05 a.m.
It isn't? I was talking to a friend that said
it could run 360/370
software. I guess I'll find out when I get it.
It may be able to do emulation, but I think the whole System/3x line is
distinct from the mainframe line. I am sure there are similarities
between the two lines, however.
William Donzelli
william(a)ans.net
10025
days inactive
10026
days old
3 comments
2 participants
participants (2)
-
spc＠armigeron.com -
william＠ans.net