25 Mar
2005
25 Mar
'05
10:50 a.m.
Looking around desperately for cp/m disks for the Xerox 820-II. If anyone
has these to share or for sale I'd be very grateful.
Thanks, Andy Erlanger
25 Mar
25 Mar
11:23 a.m.
Hi,
On Fri, Mar 25, 2005 at 10:50:57AM -0500, Andrew Erlanger wrote:
Looking around desperately for cp/m disks for the
Xerox 820-II. If anyone
has these to share or for sale I'd be very grateful.
Thanks, Andy Erlanger
Do you need 8" or 5"?
Somewhere I have some 8" ones, which I used with my 820-II motherboard
and homebrew case/drives/monitor/keyboard setup.
I'd actually really like to find an 820-II some day.
Mark
--
Mark G. Thomas (Mark at Misty.com)
http://www.misty.com/ http://mail-cleaner.com/
26 Mar
26 Mar
6:57 p.m.
Once upon a time Joe Rigdon gave me an 820-II and Don Maslin sent me an
8" CP/M disk set for it. When I ran out of time and space I gave the
machine -- and as far as I can remember, the disks -- back to Joe.
Hey Joe, still got those disks?
Glen
0/0
Andrew Erlanger wrote:
Looking around desperately for cp/m disks for the
Xerox 820-II. If anyone
has these to share or for sale I'd be very grateful.
Thanks, Andy Erlanger
27 Mar
27 Mar
7:56 p.m.
Yeah, but they're 8" and I believe he needs 5 1/4".
Andy, where are you located?
Joe
At 06:57 PM 3/26/05 -0500, you wrote:
Once upon a time Joe Rigdon gave me an 820-II and Don
Maslin sent me an
8" CP/M disk set for it. When I ran out of time and space I gave the
machine -- and as far as I can remember, the disks -- back to Joe.
Hey Joe, still got those disks?
Glen
0/0
Andrew Erlanger wrote:
Looking around desperately for cp/m disks for the
Xerox 820-II. If anyone
has these to share or for sale I'd be very grateful.
Thanks, Andy Erlanger
10:26 p.m.
I'm on Long Island, New York. You guys are probably in CA, right?
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of Joe R.
Sent: Sunday, March 27, 2005 7:57 PM
To: acme at gbronline.com; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Xerox 820-II
Yeah, but they're 8" and I believe he needs 5 1/4".
Andy, where are you located?
Joe
At 06:57 PM 3/26/05 -0500, you wrote:
Once upon a time Joe Rigdon gave me an 820-II and Don
Maslin sent me an
8" CP/M disk set for it. When I ran out of time and space I gave the
machine -- and as far as I can remember, the disks -- back to Joe.
Hey Joe, still got those disks?
Glen
0/0
Andrew Erlanger wrote:
Looking around desperately for cp/m disks for the
Xerox 820-II. If anyone
has these to share or for sale I'd be very grateful.
Thanks, Andy Erlanger
28 Mar
28 Mar
11:12 a.m.
Nope, I'm in Florida. I was thinking that if you were close I'd loan you
some 8" drives. But they're heavy so I doubt you'd want to ship them,
especailly both ways.
Joe
At 10:26 PM 3/27/05 -0500, you wrote:
I'm on Long Island, New York. You guys are probably
in CA, right?
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of Joe R.
Sent: Sunday, March 27, 2005 7:57 PM
To: acme at gbronline.com; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Xerox 820-II
Yeah, but they're 8" and I believe he needs 5 1/4".
Andy, where are you located?
Joe
At 06:57 PM 3/26/05 -0500, you wrote:
Once upon a time Joe Rigdon gave me an 820-II and
Don Maslin sent me an
8" CP/M disk set for it. When I ran out of time and space I gave the
machine -- and as far as I can remember, the disks -- back to Joe.
Hey Joe, still got those disks?
Glen
0/0
Andrew Erlanger wrote:
Looking around desperately for cp/m disks for the
Xerox 820-II. If anyone
has these to share or for sale I'd be very grateful.
Thanks, Andy Erlanger
12:07 p.m.
New subject: DEC/CMD QBUS CQD-223/T - question about ROMs
anyone have both a CQD-223/T and CQD-223/M or CQD-223/MT ?
are they the same boards with only different ROMS/EPROMS?
Makes sense to have the same hardware and enable TSCP, MSCP
based on model/options or different firmware. Anybody know?
thanks -h
12:13 p.m.
New subject: DEC/CMD QBUS CQD-223/T - question about ROMs
Heinz wrote:
anyone have both a CQD-223/T and CQD-223/M or
CQD-223/MT ?
are they the same boards with only different ROMS/EPROMS?
On the Unibus boards, the difference was a decode PAL, and the EPROMs
were the same. I suspect the Qbus boards would have done the same, but
I've never examined them.
Eric
3:07 p.m.
New subject: DEC/CMD QBUS CQD-223/T - question about ROMs
On Mon, 28 Mar 2005 12:07:23 -0500, Heinz Wolter <h.wolter at sympatico.ca> wrote:
anyone have both a CQD-223/T and CQD-223/M or
CQD-223/MT ?
are they the same boards with only different ROMS/EPROMS?
Makes sense to have the same hardware and enable TSCP, MSCP
based on model/options or different firmware. Anybody know?
thanks -h
I bought a CQD-243/T and plan to replace the EPROM to make a fortune.
The problem is that I don't have the CQD-243/M or MT.
vax, 9000
31 Mar
31 Mar
9:10 p.m.
Andy,
Did you find what you were looking for yet? I went and checked today and
found a big pile of 820 disks. I gave all the Xerox stuff away a couple of
years ago but I still pick the stuff up when I find it and I had
accumulated a lot bigger pile than I realized.
Joe
At 10:26 PM 3/27/05 -0500, you wrote:
I'm on Long Island, New York. You guys are probably
in CA, right?
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of Joe R.
Sent: Sunday, March 27, 2005 7:57 PM
To: acme at gbronline.com; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Xerox 820-II
Yeah, but they're 8" and I believe he needs 5 1/4".
Andy, where are you located?
Joe
At 06:57 PM 3/26/05 -0500, you wrote:
Once upon a time Joe Rigdon gave me an 820-II and
Don Maslin sent me an
8" CP/M disk set for it. When I ran out of time and space I gave the
machine -- and as far as I can remember, the disks -- back to Joe.
Hey Joe, still got those disks?
Glen
0/0
Andrew Erlanger wrote:
Looking around desperately for cp/m disks for the
Xerox 820-II. If anyone
has these to share or for sale I'd be very grateful.
Thanks, Andy Erlanger
7052
days inactive
7059
days old
10 comments
7 participants
participants (7)
-
acme＠gbronline.com -
aserlanger＠earthlink.net -
eric＠brouhaha.com -
h.wolter＠sympatico.ca -
Mark＠Misty.com -
rigdonj＠cfl.rr.com -
vax9000＠gmail.com