I have too many projects (including my 8/A and 11/23+) and not enough time, and don't want to keep my 11/24 sitting until the mice build nests in it. It seems to be alive (comes up to ODT on the console port) but I haven't tested it otherwise. I posted the card list several months ago on cctalk but to save you looking it up, here it is again: 1 M7133 KDF11-UA 11/24 CPU with line clock and 2 SLU 1 M7134 KT-24 Unibus map, extension to 22 bits 1 M8743 (ECC RAM, either 512 Kb or 1 Mbyte) 2 M8722 (ECC Memory either 128 Kb or 256 Kb each) 1 M8188 FPF11 floating point processor 1 M7762 RL11 disk controller RL01/02 1 M7258 LP11 printer controller 1 DSD A2130-6 disk controller? 4 M7819 DZ11-A eight RS232 ports each 1 M920 Unibus connector 1 M7297 RH11 MASSBUS Parity Control 1 M7296 RH11 MASSBUS Control & Status Registers 1 M7295 RH11A MASSBUS Bus Controller 1 M7294 RH11 MASSBUS Data Buffer and Control 3 M5904 RH11 MASSBUS Control Transceivers 1 M9300 Unibus terminator 1 M9312 Bootstrap Terminator Looking for a good home, please make a reasonable offer. Will be going on that auction place next. Shipping may be expensive (that chassis/power supply is *heavy*). Can email a pic. I'm in south central Missouri, zip 65775, if you know what it weighs and want to estimate shipping. thanks Charles