Does anybody have a working Cromemco with 5.25" SSSD floppy drive[s]? I finally made it out to pick up my Z-2D, and it came with a lot of floppy diskettes. As it's going to be awhile before I bring up the Z-2D to boot - it hasn't been powered up in many years, so I'll be cleaning and then powering it up in stages - I thought I'd go ahead and image the diskettes. I've spot-checked a couple with 22Disk and they seem to have valid data, so I'm going to try my hand at Dave Dunfield's ImageDisk. I'd like for someone with a working system to try the images and see if they're bootable. Some of the diskette labels are totally incomprehensible to me, but here's a list (almost all hand-labeled): Cromemco CDOS SYSTEM DISK Cromemco 16K BASIC Cromemco Z-2D Test Disk 1 OF 2 CDOS 1.7 & Gen. Utils incl Copy5 [CopyS?] CDOS & Utils vers. 1.7 incl drivers (2.36 cdosgen this or other utils) 2.17 Utilities Backup CDOS Ver 2.58 Boot Z80 Assembler Deadsource Backup Z80 Assembler Backup Z80 Assembler FORTRAN IV FORTRAN IV Backup FORTRAN Files FORTRAN Disk (Steve) Word Processor w/screen edit Structured BASIC 16K BASIC Deadsource Coblink & Rel Progs ** F) .COB Files (Disk 2) Backup Appsadd Working Copy OK TO BOOT HAS HARD DISK CDOS VER. 2.58 Dir Cop.dat Mailing List Rev 07 w/CDOS 2.36 Payroll System Libraries MICROEMACS Source DS Boot Disk Z-2D Screen Editor for Soroc 120 VCALC, LCALC, Search Subroutines Disk Yes, it does have a Cromemco Hard Disk. I'll be looking to suck the data off that soon, too, if it's alive. Doc