8 Feb
2017
8 Feb
'17
5:26 a.m.
Hello,
amongst other panels and things (CDC 6600 dead start panel, PDP-15
frontpanel) I got this one:
http://up.picr.de/28257957bg.jpg
I *guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Christian
8 Feb
8 Feb
5:36 a.m.
On Wed, Feb 8, 2017 at 8:26 AM, Christian Corti <
cc at informatik.uni-stuttgart.de> wrote:
Hello,
amongst other panels and things (CDC 6600 dead start panel, PDP-15
frontpanel) I got this one:
http://up.picr.de/28257957bg.jpg
I *guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Christian
Looks like a peripheral control for a CDC 1700
Bill Degnan
6:01 a.m.
Christian Corti <cc at informatik.uni-stuttgart.de> writes:
http://up.picr.de/28257957bg.jpg
I *guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Looks very similar to a CDC 160 -- which the 6000 series peripheral
processors were based on, so I guess it's a PP front panel?
--
Adam Sampson <ats at offog.org> <http://offog.org/>
6:09 a.m.
On Feb 8, 2017, at 9:01 AM, Adam Sampson <ats at
offog.org> wrote:
Christian Corti <cc at informatik.uni-stuttgart.de> writes:
There is actually very little similarity between the 160 and the 6000 series PPs. The
instruction set is vaguely alike, but that's about it.
PPs have NO front panel. Nor does the rest of the system. There's only the deadstart
panel (a 12 word boot "rom") and the operator display (a peripheral controlled
by one of the PPs).
paul
http://up.picr.de/28257957bg.jpg
I *guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Looks very similar to a CDC 160 -- which the 6000 series peripheral
processors were based on, so I guess it's a PP front panel?
6:09 a.m.
On Wed, Feb 8, 2017 at 9:01 AM, Adam Sampson <ats at offog.org> wrote:
Christian Corti <cc at
informatik.uni-stuttgart.de> writes:
I have a 1700 manual or two from the photos in there it's much closer to
the 1700 buttons, etc panel dimensions, etc. I could not find a photo of
a 160 that was rectangular in the same way, can you? The color of the
panel matches the 1700 too.
b
http://up.picr.de/28257957bg.jpg
I *guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Looks very similar to a CDC 160 -- which the 6000 series peripheral
processors were based on, so I guess it's a PP front panel?
--
9:38 a.m.
On 02/08/2017 05:26 AM, Christian Corti wrote:
Hello, amongst other panels and things (CDC 6600 dead
start panel,
PDP-15 frontpanel) I got this one: http://up.picr.de/28257957bg.jpg I
*guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Doesn't look like anything CDC thatI've ever seen. Not 1700, as it's
clearly 12-bit words. I would've guessed from the 12-bits + link that
it was DEC PDP-8-ish.
--Cjicl
9:50 a.m.
On Wed, Feb 8, 2017 at 5:38 PM, Chuck Guzis <cclist at sydex.com> wrote:
On 02/08/2017 05:26 AM, Christian Corti wrote:
Certainly not PDP8 or a clone thereof. The PDP8 numbers the bits with
bit 0 as the MSB
-tony
Hello, amongst other panels and things (CDC 6600
dead start panel,
PDP-15 frontpanel) I got this one: http://up.picr.de/28257957bg.jpg I
*guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Doesn't look like anything CDC thatI've ever seen. Not 1700, as it's
clearly 12-bit words. I would've guessed from the 12-bits + link that
it was DEC PDP-8-ish. 
10:12 a.m.
On Wed, Feb 8, 2017 at 9:38 AM, Chuck Guzis <cclist at sydex.com> wrote:
On 02/08/2017 05:26 AM, Christian Corti wrote:
The switches and the labels look very similar to the ones used on the CDC
160's front panel. And the 160 was a 12-bit machine. Maybe this was some
sort of an alternate front panel for a 160?
(See: http://s7.computerhistory.org/is/image/CHM/x92.82p-03-04?$re-medium$)
- Josh
Hello, amongst other panels and things (CDC 6600
dead start panel,
PDP-15 frontpanel) I got this one: http://up.picr.de/28257957bg.jpg I
*guess* it also comes from the CDC 6600 but I'm not sure. Can anyone
identify it?
Doesn't look like anything CDC thatI've ever seen. Not 1700, as it's
clearly 12-bit words. I would've guessed from the 12-bits + link that
it was DEC PDP-8-ish.
--Cjicl
10:41 a.m.
On 2/8/17 10:12 AM, Josh Dersch wrote:
The switches and the labels look very similar to the
ones used on the CDC
160's front panel. And the 160 was a 12-bit machine. Maybe this was some
sort of an alternate front panel for a 160?
I'm going to guess it is for a 160-G, with 162 tape synchronizer and expanded memory.
2874
days inactive
2874
days old
8 comments
8 participants
participants (8)
-
aek＠bitsavers.org -
ard.p850ug1＠gmail.com -
ats＠offog.org -
billdegnan＠gmail.com -
cc＠informatik.uni-stuttgart.de -
cclist＠sydex.com -
derschjo＠gmail.com -
paulkoning＠comcast.net