Lastly, I've managed to track down a fair selection of 3.5" drives
(I've got the MPF520, an MPF920 or two, and a few Samsung SFD321 series
drives), but a Teac FD-235 series drive would be nice to play with.
Alas, I haven't been able to find a source for these -- does anyone have
a working spare surplus-to-requirements? I'd prefer one of the earlier
versions with the massive jumper block; IIRC the newer ones have been
declawed somewhat.
--- I think I can help you with that one
I'm also after:
* Some form of 8-inch drive and a couple of discs. Possibly Shugart
SA400 or SA800 series or something similar? It doesn't have to look
pretty, it just has to work. Matching cabling would be nice too
(whatever-the-drive-has to Shugart-style 34-pin 0.1" IDC header ideally)
--- I think I have an 8" drive, DSDD, that doesnt agree with my conversion
system, but which is believed to be ok
--- I also am supposed to have a print with an edge connector (50 pins) and
IDC header on the other (34 pin)
* a 40-track 5.25" drive.
--- I have some 5.25" drives, 96 tpi and 40 tpi, various makes. I'll find
some nice ones (read : many possible strapping possibilities)
If you are interested, I can also send you the parts and software to set up
an Octopus conversion system (look at
http://www.farumdata.dk/uk/enoctop.asp
I also have some empty cases as shown. They have room for 2x 5.25", 2x 3.5"
and 1x 8"
Can't help you though with a powersupply, I've only one left and have that
in stock for my customers.
The box is made for an AT powerr supply (the big one, L shaped), so you
would need a 24VDC supply for the 8" disk, and the relevant power connector
That would enable you to format quite a lot of discs, which you then can use
to test/enhance your analysis system.
You can contact me offline, and tell me what you would like
Costs ? P&P only, from Denmark
Nico