Hi All If someone on the list gets this, I have quite a bit of software that I've collected for this machine. It looks like someone has changed the machine to be a CPM machine. It looks to have both the serial ( rs232/20mil ) and cassette interfaces. It seems to be missing the video board ( where the keyboard would connect to ). If someone gets this, I do have a spare video board that I might be talked into trading for something else, if someone wanted to bring it back to an original condition. I also have quite a bit of documentation for the Poly88. It does require a parallel keyboard to work with the video board ( As I recall all console I/O can be revectored at boot using a ROM at 400h. This could make the serial be the console but I don't think the debug monitor is revectored ). Although, the ROM's on the CPU starts at address 0000h, there is a control bit that one can shadow the ROM and allow the machine to exist in complete RAM. I can explain this to anyone that wants to do so. The software I have is all Poly88 cassette based software. I have an assembler, BASIC, many of the Poly demo programs and I also have a ROM based tiny BASIC as well. I have also written code to bootstrap a system from the serial port ( does require the system debug monitor to function ). Dwight