30 Dec
2000
30 Dec
'00
5:49 p.m.
Anybody know the baudrate for the Hayes Chrono?
WOrdsize and parity would be nice to know, too.
ALso, is it DCE or DTE?
I would look at my electronic copy of the manual, but
it looks like it went to the bit-bucket . . .
Jeff
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
31 Dec
31 Dec
1:40 a.m.
Man, back in the old dayz I REALLY wanted one of those.
Nothing else was available for an RTC for my machine at the time. The
Hayes/Stack Chronograph was a Rolls Royce of clocks and cost like one too.
I bet it is 300baud.
Regards,
Jeff
In <20001231.014950.-981897.0.jeff.kaneko(a)juno.com>om>, on 12/31/00
at 10:40 AM, jeff.kaneko(a)juno.com said:
Anybody know the baudrate for the Hayes Chrono?
WOrdsize and parity would be nice to know, too.
ALso, is it DCE or DTE?
I would look at my electronic copy of the manual, but
it looks like it went to the bit-bucket . . .
Jeff
________________________________________________________________ GET
INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
--
-----------------------------------------------------------
Jeffrey S. Worley
President
Complete Computer Services, Inc.
30 Greenwood Rd.
Asheville, NC 28803
828-277-5959
Visit our website at HTTP://www.Real-Techs.com
THETechnoid(a)home.com
-----------------------------------------------------------
3:24 a.m.
At 01:49 AM 12/31/00 -0600, you wrote:
Anybody know the baudrate for the Hayes Chrono?
WOrdsize and parity would be nice to know, too.
ALso, is it DCE or DTE?
I would look at my electronic copy of the manual, but
it looks like it went to the bit-bucket . . .
IIRC: The Hayes Chronograph responsed to the 'AT' command set just like
the 'Smartmodems', and would derive the data rate settings from that...
-jim
---
jimw(a)agora.rdrop.com
The Computer Garage - http://www.rdrop.com/~jimw
Computer Garage Fax - (503) 646-0174
The 'computergarage.org' domain is currently offline.
Current web site and email shown above
4:37 a.m.
Jeff, I think it works as DCE (since it gets plugged into the host computer
and the modem plugs into it). It's probably 300, 8, N, 1. Keep in mind
that it won't respond unless you're sending AT commands that are specific to
the Chronograph.
g.
----- Original Message -----
From: <jeff.kaneko(a)juno.com>
To: <classiccmp(a)classiccmp.org>
Sent: Saturday, December 30, 2000 11:49 PM
Subject: Hays Chronograph, baudrate, bits, etc. . .
Anybody know the baudrate for the Hayes Chrono?
WOrdsize and parity would be nice to know, too.
ALso, is it DCE or DTE?
I would look at my electronic copy of the manual, but
it looks like it went to the bit-bucket . . .
Jeff
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
3:38 p.m.
Hi Jeff,
From Chapt 3:
All commands must begin with the characters AT which is an
attention code. The baud rate, parity sense, and word size
are determined from the AT.
clint
PS I have the manual, but it is at the bottom of the 'to scan'
pile...
On Sun, 31 Dec 2000 jeff.kaneko(a)juno.com wrote:
Anybody know the baudrate for the Hayes Chrono?
WOrdsize and parity would be nice to know, too.
ALso, is it DCE or DTE?
I would look at my electronic copy of the manual, but
it looks like it went to the bit-bucket . . .
Jeff
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
3:41 p.m.
Doh! forgot to mention it does 300 and 1200 baud only...
clint
On Sun, 31 Dec 2000 jeff.kaneko(a)juno.com wrote:
Anybody know the baudrate for the Hayes Chrono?
WOrdsize and parity would be nice to know, too.
ALso, is it DCE or DTE?
I would look at my electronic copy of the manual, but
it looks like it went to the bit-bucket . . .
Jeff
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
4:15 p.m.
OK... All this chat about the Hayes Cronograph has peeked my interest. In
the last 5 years I've only seen one. Anybody have an idea about how many
of these were made?
I knew I should have bought one of these when they were on the market...
George Rachor
=========================================================
George L. Rachor Jr. george(a)racsys.rt.rain.com
Hillsboro, Oregon http://racsys.rt.rain.com
United States of America Amateur Radio : KD7DCX
On Sun, 31 Dec 2000, Clint Wolff (VAX collector) wrote:
Doh! forgot to mention it does 300 and 1200 baud only...
clint
On Sun, 31 Dec 2000 jeff.kaneko(a)juno.com wrote:
Anybody know the baudrate for the Hayes Chrono?
WOrdsize and parity would be nice to know, too.
ALso, is it DCE or DTE?
I would look at my electronic copy of the manual, but
it looks like it went to the bit-bucket . . .
Jeff
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
8525
days inactive
8526
days old
6 comments
6 participants
participants (6)
-
geneb＠deltasoft.com -
george＠racsys.rt.rain.com -
jeff.kaneko＠juno.com -
jimw＠agora.rdrop.com -
THETechnoid＠home.com -
vaxman＠qwest.net