27 Feb
2002
27 Feb
'02
2:51 a.m.
On Tue, 26 Feb 2002, Alan Pearson <alan.pearson(a)cramer.com> wrote:
I'm looking for a DEC BC09J cable to hook up a
VS3100 to a CD drive...
That's the same cable as used with the DECstation 2100/3100. A couple
DS3100s I hauled home had a different cable, p/n BC56H-03. This one is
a few inches longer and the cable comes straight into the 50 pin
Centronics connector as opposed to the BC09J which is right angle.
HTH
Mike
27 Feb
27 Feb
5:40 a.m.
On Wed, 27 Feb 2002 Mzthompson(a)aol.com wrote:
That's the same cable as used with the DECstation
2100/3100. A couple
DS3100s I hauled home had a different cable, p/n BC56H-03. This one is
a few inches longer and the cable comes straight into the 50 pin
Centronics connector as opposed to the BC09J which is right angle.
I only had one BC09J cable, and my DS3100 came without internal
cables, so I used a regular 3-device 50-pin ribbon and a $6
50-pin-int/68-pin-suface-mount adapter. It fits the bulkhead slot just
fine.
I cheat.
Doc
7:02 a.m.
On Tue, 26 Feb 2002, Alan Pearson
<alan.pearson(a)cramer.com> wrote:
Apparently the thought was to sell/bundle the 90 degree cable, to force the
purchaser to `upgrade' to the straight cable when it was necessry to plug
in more than one SCSI device. I cursed it soundly when I realized it
obstructed the pass-thru connector on the back of the TK50 I have. As all
my other SCSI toys have the HD connectors, I might have to end up getting a
50-pin centronics-like :) M-F cable to connect things.
I'm looking for a DEC BC09J cable to hook up
a VS3100 to a CD drive...
That's the same cable as used with the DECstation 2100/3100. A couple
DS3100s I hauled home had a different cable, p/n BC56H-03. This one is
a few inches longer and the cable comes straight into the 50 pin
Centronics connector as opposed to the BC09J which is right angle.
HTH
Mike
Bob
8146
days inactive
8146
days old
3 comments
4 participants
participants (4)
-
allain＠panix.com -
doc＠mdrconsult.com -
Mzthompson＠aol.com -
rschaefe＠gcfn.org