-----Original Message-----
From: cctalk-bounces(a)classiccmp.org
[mailto:cctalk-bounces@classiccmp.org] On Behalf Of Dave Dunfield
Sent: 18 April 2004 19:48
To: cctalk(a)classiccmp.org
Subject: Need help with Atari 1050 disk system
#1) Can anyone tell me the power requirements of this drive?
(voltage, polarity, current) - this information should be
on the label of
the power supply - as you probably guessed, I did not get
the supply with
the drive (had an Atari computer supply in the box).
If you go to
www.classiccmp.org or google and search the archives you'll
find a thread or 2 on power supplies for the Atari 400/800 - these are the
same ones that run the 1050 floppy. The one I have here that recently
powered my Atari 400 and 1200XL is marked as 9.5V 1.5A but it's acting up so
my DMM won't tell me whether it's centre positive or not.
need some sort
of boot disk... Anyone out there with one that can make a
copy or send an
image (Can Atari images be read/written on a PC's drive?)
I don't think so, you might need an SIO2PC cable to do that. Hopefully Curt
will be along with more info shortly, as long as he's been allowed back in
after his out-of-office faux pas the other week :)
Cheers
--
Adrian/Witchy
Owner & Webmaster, Binary Dinosaurs
www.binarydinosaurs.co.uk - possibly the UK's biggest online computer museum
www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(