14 Jul
1998
14 Jul
'98
2:23 p.m.
Well, I have DOS 1.1 (May, 1982) and Windows 1.03. In fact, I'm in the
process of de-compiling DOS 1.1, now. BootSector: done. IBMBIO: 75% done.
IBMDOS: not started yet.
I'm still looking for DOS 1.0. In fact, I have copies of many true-IBM
dos-es (not OEM versions).
Rich Cini/WUGNET <nospam_rcini(a)msn.com>
- ClubWin! Charter Member
- MCP Windows 95/Windows Networking
- Preserver of "classic" computers
<<<< ========== reply separator ========== >>>>>
15 Jul
15 Jul
4:37 a.m.
Well, I have DOS 1.1 (May, 1982) and Windows 1.03. In fact, I'm in the
process of de-compiling DOS 1.1, now. BootSector: done. IBMBIO: 75% done.
IBMDOS: not started yet.
I'm still looking for DOS 1.0. In fact, I have copies of many true-IBM
dos-es (not OEM versions).
I may be able to help... I worked for a company in the early '80's, Bruce
and James. They wrote a program for the PC called WordVision, intended
to be the first of what we now call an office suite. It required 96K
of RAM, a floppy disk and DOS 1.0 or higher. The install disk was, IIRC,
DOS 1.0. The only hitch is that it's copy protected. You had to boot the
original floppy and run an installation program to make slave disks. You
could then copy the application from the slave disks to other diskettes
or a hard drive. If only the program didn't use a cycle-counting key repeat
loop, it'd still work on newer hardware.
If teledisk or some such can package up the disk image, I can see about
making it available for such a worthy project. I wanted to dig through the
disk anyway, to look for the oft-discussed Digital Research strings.
It's not a full DOS 1.0 kit, but it is the bootsector, IO.SYS and MSDOS.SYS.
Let me know if you are interested.
-ethan
11:19 a.m.
On Wed, 15 Jul 1998, Ethan Dicks wrote:
**** snip ****
I may be able to help... I worked for a company in the
early '80's, Bruce
and James. They wrote a program for the PC called WordVision, intended
to be the first of what we now call an office suite. It required 96K
of RAM, a floppy disk and DOS 1.0 or higher. The install disk was, IIRC,
DOS 1.0. The only hitch is that it's copy protected. You had to boot the
original floppy and run an installation program to make slave disks. You
could then copy the application from the slave disks to other diskettes
or a hard drive. If only the program didn't use a cycle-counting key repeat
loop, it'd still work on newer hardware.
If teledisk or some such can package up the disk image, I can see about
making it available for such a worthy project. I wanted to dig through the
disk anyway, to look for the oft-discussed Digital Research strings.
TeleDisk should be able to handle it without problem.
It's not a full DOS 1.0 kit, but it is the
bootsector, IO.SYS and MSDOS.SYS.
Let me know if you are interested.
If you do make up a disk image, I would appreciate having access to a
copy of it. Thanks!
- don
donm(a)cts.com
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Don Maslin - Keeper of the Dina-SIG CP/M System Disk Archives
Chairman, Dina-SIG of the San Diego Computer Society
Clinging tenaciously to the trailing edge of technology.
Sysop - Elephant's Graveyard (CP/M) - 619-454-8412
*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*
see old system support at http://www.psyber.com/~tcj
visit the "Unofficial" CP/M Web site at http://cdl.uta.edu/cpm
with Mirror at http://www.mathcs.emory.edu/~cfs/cpm
9506
days inactive
9507
days old
2 comments
3 participants
participants (3)
-
donm＠cts.com -
erd＠infinet.com -
rcini＠email.msn.com