The restoration is physically happening at my place. As noted below we have a small and
quite knowledgeable group of people contributing, including actual hardware when we are
missing a part (thanks Al !). A few of us are chronicling this on our favorite media from
our favorite angle.
I like to make short videos trying to convey the inside story of the restoration, on my
YouTube channel:
https://www.youtube.com/curiousmarc
It's interspersed with all the other restorations, but two videos so far:
https://youtu.be/YupOC_6bfMI
https://youtu.be/xPyqQXFC2yw
Ed Thelen likes to collect every bit of raw information floating around, including some of
the team emails and throw them into equally raw site, as he does for the IBM 1401
restoration effort at CHM:
http://ed-thelen.org/RestoreAlto/index.html
Carl Claunch methodically recounts everything he does every day (and he does a lot), so
when he works on the Alto, you'll know every detail:
http://rescue1130.blogspot.com/
Ken Shirriff makes deeply researched, superlative detailed posts on his blog. These are
reference pieces, I admire them a lot:
http://www.righto.com/2016/06/y-combinators-xerox-alto-restoring.html
And it gets discussed on the Y-combinator (the owners of the machine) and hopefully here
too.
Seeing the interest, I will make an effort to post new links when they become available,
unless of course Master Al beats me to it.
Marc
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at
classiccmp.org] On Behalf Of Al Kossow
Sent: Monday, June 20, 2016 8:54 AM
To: cctalk at
classiccmp.org
Subject: Re: Y Combinator is restoring one of Alan Kay's Xerox Alto machines
http://www.righto.com/2016/06/y-combinators-xerox-alto-restoring.html
https://news.ycombinator.com/item?id=11929396
http://ed-thelen.org/RestoreAlto/index.html
On 6/20/16 8:51 AM, Al Kossow wrote:
I post just went up on Saturday. It's nice that
both CHM and LCM folks
are helping with this.
On 6/20/16 8:41 AM, Liam Proven wrote:
http://www.righto.com/2016/06/y-combinators-xerox-alto-restoring.html
Found via:
http://www.osnews.com/story/29261/Xerox_Alto_restoring_the_legendary_
1970s_GUI_computer
There are 2 videos up so far, with disassemblies that may interest CCmpers.
Some people from the list are involved, including Al Kossow, but I
haven't seen the link posted.