Unique DEC VAX System now available in Minneapolis, MN - test-drb@ccmp.vtda.org

8 Aug 2014

Sorry about "SPAM" in the Subject - my e-mail host put it there and I 
forgot to remove it!

...
 vmssys at hushmail.com wrote: 
...

http://minneapolis.craigslist.org/dak/sys/4595287377.html
A complete, clean, and working DEC VAX data center is available for
pick-up in Minneapolis, Minnesota.  It is scheduled to go to recycling
in a week. Act fast if you are interested. 
THIS SYSTEM DESERVES TO BE RESCUED. NO REASONABLE OFFER WILL BE TURNED
DOWN.

{Snip]

 PDP-11 Board, MEMORY & Cabinet Kits
 Available BSD V2.11 http://minnie.tuhs.org/PUPS/index.html
 1 M8190-AB DEC KDJ11-B QBUS22 15Mhz PDP-11 CPU unusable socket for
FPJ11
 2 MSV11-JE DEC M8637, QBUS22, PDP-11 2MB ECC PMI RAM  (Total of 4MB)
 1 KFQSA QBUS DSSI Host Adapter emulating a QDA/UDA50 to RFx Drives
 1 DQ142 DILOG Pertec tape Interface, TS11, 4 drives, QBUS
 1 70-21150-02 DEC BA23 Cabinet Distribution Panel
 1 70-22892-01 DEC PDP-11/84 Console Cab Kit
 Just in case anyone is concerned, the MSV11-JE has been tested
and successfully used with the M8190-AB as PMI memory.  Just
place the two memory boards above the CPU in the normal manner
as if the CPU board was a PDP-11/83.  While the CPU will still
run at 15 MHz (as opposed to 18 MHz for the PDP-11/83), the
system will still experience about a 20% speed increase due to the
PMI memory.  Just place the memory and CPU in the first three
slots of a BA23 box and add a controller and disk drive.

Jerome Fine