13 Mar
2022
13 Mar
'22
4:18 a.m.
Hi,
I also have an H500 waiting for restoration.
Maybe anyone can give better winfos about the plugs/connectors of the
patch cables.
I didn't have any, I have to make new.
With best regards
Gerhard
Zitat von cctalk-request at classiccmp.org:
Send cctalk mailing list submissions to
? ? ? ? cctalk at classiccmp.org
To subscribe or unsubscribe via the World Wide Web, visit
? ? ? ? http://www.classiccmp.org/mailman/listinfo/cctalk
or, via email, send a message with subject or body 'help' to
? ? ? ? cctalk-request at classiccmp.org
You can reach the person managing the list at
? ? ? ? cctalk-owner at classiccmp.org
When replying, please edit your Subject line so it is more
specificthan "Re: Contents of cctalk digest..."
13 Mar
13 Mar
8:37 a.m.
Hi Gerhard,
I used the following banana plugs:
https://www.aliexpress.com/item/1005002907717547.html
Please note that only about 30% of the plugs I received were a good fit.
The rest I had to modify.
I had to remove the barrel shaped contact spring and compress it carefully
to open it up to make good contact with the sockets.
I also soldered the barrel shaped contact spring onto the plug body. It is
a lot of work to make the patch cables with plugs which don't quite fit,
but with the modification the result is now neat and usable.
I couldn't find anything else with a better fit. The original 0.1" taper
pins are "unobtainium".
Regards
Tom
On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk <
cctalk at classiccmp.org> wrote:
Hi,
I also have an H500 waiting for restoration.
Maybe anyone can give better winfos about the plugs/connectors of the
patch cables.
I didn't have any, I have to make new.
With best regards
Gerhard
Zitat von cctalk-request at classiccmp.org:
Send cctalk mailing list submissions to
cctalk at classiccmp.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.classiccmp.org/mailman/listinfo/cctalk
or, via email, send a message with subject or body 'help' to
cctalk-request at classiccmp.org
You can reach the person managing the list at
cctalk-owner at classiccmp.org
When replying, please edit your Subject line so it is more
specificthan "Re: Contents of cctalk digest..."
10:06 a.m.
Hi Tom,
what do you think about this parts:
Microsoft Word - D5936.doc (mouser.at)[1]
Looks like 0.09" diameter.
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
?
I used the following banana plugs:
?
https://www.aliexpress.com/item/1005002907717547.html
?
Please note that only about 30% of the plugs I received were a good
fit. The rest I had to modify.
?
I had to remove the barrel shaped contact spring and compress it
carefully to open it up to make good contact with the sockets.
I also soldered the barrel shaped contact spring onto the plug
body. It is a lot of work to make the patch cables with plugs which
don't quite fit, but with the modification the result is now neat
and usable.
?
I couldn't find anything else with a better fit. The original 0.1"
taper pins are "unobtainium".
Regards
Tom
?
?
On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk
<cctalk at classiccmp.org> wrote:
Links:
------
[1] https://www.mouser.at/datasheet/2/159/D5936-1514588.pdf
Hi,
? ? I also have an H500 waiting for restoration.
? ? Maybe anyone can give better winfos about the
plugs/connectors of the
patch cables.
? ? I didn't have any, I have to make new.
? ? With best regards
? ? Gerhard
? ? Zitat von cctalk-request at classiccmp.org:
Send cctalk mailing list submissions to
? ?? ? ? ? cctalk at classiccmp.org
? ?To subscribe or unsubscribe via the World Wide Web, visit
? ?? ? ? ? http://www.classiccmp.org/mailman/listinfo/cctalk
? ?or, via email, send a message with subject or body 'help' to
? ?? ? ? ? cctalk-request at classiccmp.org
? ?You can reach the person managing the list at
? ?? ? ? ? cctalk-owner at classiccmp.org
? ?When replying, please edit your Subject line so it is more?
specificthan "Re: Contents of cctalk digest..."
10:55 a.m.
Hi Gerhard,
Yes - these look good but the price is much higher than what I paid. As I
no longer work, modifying the cheap Chinese banana plugs was viable. If you
still work and are time limited then the Pomona plugs may be the better
option. It may be best to get a small number first to try before committing
to a larger order.
Best regards
Tom
On Mon, Mar 14, 2022 at 1:06 AM DI Gerhard Kreuzer <
gerhard.kreuzer at liftoff.at> wrote:
Hi Tom,
what do you think about this parts:
Microsoft Word - D5936.doc (mouser.at)
<https://www.mouser.at/datasheet/2/159/D5936-1514588.pdf>
Looks like 0.09" diameter.
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
I used the following banana plugs:
https://www.aliexpress.com/item/1005002907717547.html
Please note that only about 30% of the plugs I received were a good fit.
The rest I had to modify.
I had to remove the barrel shaped contact spring and compress it carefully
to open it up to make good contact with the sockets.
I also soldered the barrel shaped contact spring onto the plug body. It is
a lot of work to make the patch cables with plugs which don't quite fit,
but with the modification the result is now neat and usable.
I couldn't find anything else with a better fit. The original 0.1" taper
pins are "unobtainium".
Regards
Tom
On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk <
cctalk at classiccmp.org> wrote:
Hi,
I also have an H500 waiting for restoration.
Maybe anyone can give better winfos about the plugs/connectors of the
patch cables.
I didn't have any, I have to make new.
With best regards
Gerhard
Zitat von cctalk-request at classiccmp.org:
Send cctalk mailing list submissions to
cctalk at classiccmp.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.classiccmp.org/mailman/listinfo/cctalk
or, via email, send a message with subject or body 'help' to
cctalk-request at classiccmp.org
You can reach the person managing the list at
cctalk-owner at classiccmp.org
When replying, please edit your Subject line so it is more
specificthan "Re: Contents of cctalk digest..."
12:36 p.m.
Hi Tom,
everything else ist more expensive than Chinese stuff, but quality ......
I have to order parts at Mouser, so I will get 10 pcs.
This will take 3 or 4 weeks, so stay tunes, I will report.
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
?
Yes - these look good but the price is much higher than what I paid.
As I no longer work, modifying the cheap Chinese banana plugs was
viable. If you still work and are time limited then the Pomona plugs
may be the better option. It may be best to get a small number first
to try before committing to a larger order.
?
Best regards
Tom
?
?
?
On Mon, Mar 14, 2022 at 1:06 AM DI Gerhard Kreuzer
<gerhard.kreuzer at liftoff.at> wrote:
Links:
------
[1] https://www.mouser.at/datasheet/2/159/D5936-1514588.pdf
Hi Tom,
what do you think about this parts:
Microsoft Word - D5936.doc (mouser.at)[1]
Looks like 0.09" diameter.
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
?
I used the following banana plugs:
?
https://www.aliexpress.com/item/1005002907717547.html
?
Please note that only about 30% of the plugs I received were a
good fit. The rest I had to modify.
?
I had to remove the barrel shaped contact spring and compress it
carefully to open it up to make good contact with the sockets.
I also soldered the barrel shaped contact spring onto the
plug body. It is a lot of work to make the patch cables with plugs
which don't quite fit, but with the modification the result is now
neat and usable.
?
I couldn't find anything else with a better fit. The original 0.1"
taper pins are "unobtainium".
Regards
Tom
?
?
On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk
<cctalk at classiccmp.org> wrote:
?
Hi,
? ? I also have an H500 waiting for restoration.
? ? Maybe anyone can give better winfos about the
plugs/connectors of the
patch cables.
? ? I didn't have any, I have to make new.
? ? With best regards
? ? Gerhard
? ? Zitat von cctalk-request at classiccmp.org:
> Send cctalk mailing list submissions to
>? ?? ? ? ? cctalk at classiccmp.org
>
>? ?To subscribe or unsubscribe via the World Wide Web, visit
>? ?? ? ? ? http://www.classiccmp.org/mailman/listinfo/cctalk
>? ?or, via email, send a message with subject or body 'help' to
>? ?? ? ? ? cctalk-request at classiccmp.org
>
>? ?You can reach the person managing the list at
>? ?? ? ? ? cctalk-owner at classiccmp.org
>
>? ?When replying, please edit your Subject line so it is more?
> specificthan "Re: Contents of cctalk digest..."
14 Mar
14 Mar
1:55 a.m.
Hi Tom,
here another source/manufacture ..
2550327.pdf (farnell.com)[1]
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
?
Yes - these look good but the price is much higher than what I paid.
As I no longer work, modifying the cheap Chinese banana plugs was
viable. If you still work and are time limited then the Pomona plugs
may be the better option. It may be best to get a small number first
to try before committing to a larger order.
?
Best regards
Tom
?
?
?
On Mon, Mar 14, 2022 at 1:06 AM DI Gerhard Kreuzer
<gerhard.kreuzer at liftoff.at> wrote:
Links:
------
[1] https://www.farnell.com/datasheets/2550327.pdf
[2] https://www.mouser.at/datasheet/2/159/D5936-1514588.pdf
Hi Tom,
what do you think about this parts:
Microsoft Word - D5936.doc (mouser.at)[2]
Looks like 0.09" diameter.
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
?
I used the following banana plugs:
?
https://www.aliexpress.com/item/1005002907717547.html
?
Please note that only about 30% of the plugs I received were a
good fit. The rest I had to modify.
?
I had to remove the barrel shaped contact spring and compress it
carefully to open it up to make good contact with the sockets.
I also soldered the barrel shaped contact spring onto the
plug body. It is a lot of work to make the patch cables with plugs
which don't quite fit, but with the modification the result is now
neat and usable.
?
I couldn't find anything else with a better fit. The original 0.1"
taper pins are "unobtainium".
Regards
Tom
?
?
On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk
<cctalk at classiccmp.org> wrote:
?
Hi,
? ? I also have an H500 waiting for restoration.
? ? Maybe anyone can give better winfos about the
plugs/connectors of the
patch cables.
? ? I didn't have any, I have to make new.
? ? With best regards
? ? Gerhard
? ? Zitat von cctalk-request at classiccmp.org:
> Send cctalk mailing list submissions to
>? ?? ? ? ? cctalk at classiccmp.org
>
>? ?To subscribe or unsubscribe via the World Wide Web, visit
>? ?? ? ? ? http://www.classiccmp.org/mailman/listinfo/cctalk
>? ?or, via email, send a message with subject or body 'help' to
>? ?? ? ? ? cctalk-request at classiccmp.org
>
>? ?You can reach the person managing the list at
>? ?? ? ? ? cctalk-owner at classiccmp.org
>
>? ?When replying, please edit your Subject line so it is more?
> specificthan "Re: Contents of cctalk digest..."
5:16 a.m.
Hi Gerhard,
The Farnell plugs seem to be 2 mm not 0.1".
I suspect the Pomona plugs you mentioned earlier will be a better fit.
You need at least 100 leads which means at least 200 plugs.
I would get samples of both types before committing to a larger purchase.
Best regards
Tom
On Mon, Mar 14, 2022 at 4:55 PM DI Gerhard Kreuzer <
gerhard.kreuzer at liftoff.at> wrote:
Hi Tom,
here another source/manufacture ..
2550327.pdf (farnell.com) <https://www.farnell.com/datasheets/2550327.pdf>
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
Yes - these look good but the price is much higher than what I paid. As I
no longer work, modifying the cheap Chinese banana plugs was viable. If you
still work and are time limited then the Pomona plugs may be the better
option. It may be best to get a small number first to try before committing
to a larger order.
Best regards
Tom
On Mon, Mar 14, 2022 at 1:06 AM DI Gerhard Kreuzer <
gerhard.kreuzer at liftoff.at> wrote:
Hi Tom,
what do you think about this parts:
Microsoft Word - D5936.doc (mouser.at)
<https://www.mouser.at/datasheet/2/159/D5936-1514588.pdf>
Looks like 0.09" diameter.
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
I used the following banana plugs:
https://www.aliexpress.com/item/1005002907717547.html
Please note that only about 30% of the plugs I received were a good fit.
The rest I had to modify.
I had to remove the barrel shaped contact spring and compress it
carefully to open it up to make good contact with the sockets.
I also soldered the barrel shaped contact spring onto the plug body. It
is a lot of work to make the patch cables with plugs which don't quite fit,
but with the modification the result is now neat and usable.
I couldn't find anything else with a better fit. The original 0.1" taper
pins are "unobtainium".
Regards
Tom
On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk <
cctalk at classiccmp.org> wrote:
Hi,
I also have an H500 waiting for restoration.
Maybe anyone can give better winfos about the plugs/connectors of the
patch cables.
I didn't have any, I have to make new.
With best regards
Gerhard
Zitat von cctalk-request at classiccmp.org:
Send cctalk mailing list submissions to
cctalk at classiccmp.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.classiccmp.org/mailman/listinfo/cctalk
or, via email, send a message with subject or body 'help' to
cctalk-request at classiccmp.org
You can reach the person managing the list at
cctalk-owner at classiccmp.org
When replying, please edit your Subject line so it is more
specificthan "Re: Contents of cctalk digest..."
1331
days inactive
1332
days old
6 comments
2 participants
participants (2)
-
ccth6600＠gmail.com -
gerhard.kreuzer＠liftoff.at