13 Oct
2016
13 Oct
'16
3:31 p.m.
It's too bad it's out in Australia, I qualify for the top priority of the
list, 'under 21 years of age'
Especially this is too bad: "Anything not sold, swapped or given away by
early December will likely go to recycling."
Joe
15 Oct
15 Oct
2:11 a.m.
On Thu, Oct 13, 2016 at 11:31 AM, Joseph Zatarski <jzatar2 at illinois.edu>
wrote:
It's too bad it's out in Australia, I qualify
for the top priority of the
list, 'under 21 years of age'
Especially this is too bad: "Anything not sold, swapped or given away by
early December will likely go to recycling."
Joe
Malcolm - The power supplies for things like the MicroVAX...these are not
compatible with US units, correct?
2:51 a.m.
On 10/14/2016 09:11 PM, william degnan wrote:
On Thu, Oct 13, 2016 at 11:31 AM, Joseph Zatarski
<jzatar2 at illinois.edu>
wrote:
I think anything of MicroVAX vintage should have power
supplies that can run off 120 or 240. They MIGHT need a
voltage range switch to be flipped.
Jon
It's too bad it's out in Australia, I
qualify for the top priority of the
list, 'under 21 years of age'
Especially this is too bad: "Anything not sold, swapped or given away by
early December will likely go to recycling."
Joe
Malcolm - The power supplies for things like the MicroVAX...these are not
compatible with US units, correct?
3:48 a.m.
On 10/14/2016 7:51 PM, Jon Elson wrote:
On 10/14/2016 09:11 PM, william degnan wrote:
This is an 11/23 chassis, certainly is.
http://jimsoldtoys.blogspot.com/search/label/pdp11%2F23
The BA23 is as well. I did see some systems such as the 11/84 that I
have that list a wired 115 voltage, and no obvious way to rewire or
strap it though, so some may not be.
thanks
Jim
On Thu, Oct 13, 2016 at 11:31 AM, Joseph Zatarski
<jzatar2 at illinois.edu>
wrote:
I think anything of MicroVAX vintage should have power supplies that
can run off 120 or 240. They MIGHT need a voltage range switch to be
flipped.
Jon It's too bad it's out in Australia, I
qualify for the top priority
of the
list, 'under 21 years of age'
Especially this is too bad: "Anything not sold, swapped or given
away by
early December will likely go to recycling."
Joe
Malcolm - The power supplies for things like the MicroVAX...these are
not
compatible with US units, correct?
3:57 a.m.
On Fri, Oct 14, 2016 at 8:48 PM, jim stephens <jwsmail at jwsss.com> wrote:
The BA23 is as well. I did see some systems such as the 11/84 that I have
that list a wired 115 voltage, and no obvious way to rewire or strap it
though, so some may not be.
The H7204 in the 11/84-E has a plug that is removed and rotated
180-degrees to change between 120V and 240V. The selected voltage is
printed on either side of the plug and visible though a small window
on the back of the supply. The 11/84-E that I recently acquired came
configured for 240V and I rotated the plug to 120V. That's all I had
to do in addition to replacing the hardwired AC cord with one with a
plug for a 120V receptacle.
Don't know about the supplies on the earlier versions of the 11/84.
3094
days inactive
3096
days old
4 comments
5 participants
participants (5)
-
billdegnan＠gmail.com -
elson＠pico-systems.com -
glen.slick＠gmail.com -
jwsmail＠jwsss.com -
jzatar2＠illinois.edu