24 Sep
2003
24 Sep
'03
1:03 p.m.
Well, I seem to have gotten my power supply straightened out. It wasn't
the switch after all, but the power supply itself. A different problem
has now manifested itself.
On power on I am getting this on the console:
Error 61
M8190 Clock Error
It then spits out the contents of various registers and asks if I want
to run the test again.
I couldn't find this particular error via the normal search engines.
Does any have any ideas as to what the problem may be and how to correct
it?
--
Christopher McNabb <cmcnabb(a)4mcnabb.net>
The McNabb Family
27 Sep
27 Sep
8:02 a.m.
Christopher McNabb wrote:
Well, I seem to have gotten my power supply
straightened out. It wasn't
the switch after all, but the power supply itself. A different problem
has now manifested itself.
On power on I am getting this on the console:
Error 61
M8190 Clock Error
It then spits out the contents of various registers and asks if I want
to run the test again.
I couldn't find this particular error via the normal search engines.
Does any have any ideas as to what the problem may be and how to correct
it?
Not a clue. Doesn't sound good, but may just be someting to do with
a TOY clock, but I don't think the 83 had one of those. Other possibilities
are the 60hz interrupt from the power line, or the main CPU's clock.
They used "clock" to refer to a lot of different things.
I suggust posting to alt.sys.pdp11 where there are a lot of
pdp-11 gurus hang out.
8:15 a.m.
New subject: Heathkit CRT Test device.
Today I picked up a "Heathkit CRT Tester and Rejuvenator IT-5230"
in case. It has 5 standard socket adaptors for various tubes plus two
more, including alligator clips, for the rest. Also 2 potentiometers, 4
meters, 6 switches, and 10 lights.
Knowing what I do about some people on the list getting stuck with
CRT's that are hard to replace I thought I would give this a try. Give
me an offer for shipping and handling and it's yours, else I think it
goes back in a week.
John A.
3 Oct
3 Oct
1:30 a.m.
New subject: Heathkit CRT Test device.
I'm probably tossing this tomorrow if there are no takers.
j
----- Original Message -----
From: John Allain <allain(a)panix.com>
To: CCTalk <cctalk(a)classiccmp.org>
Sent: Saturday, September 27, 2003 4:15 PM
Subject: Heathkit CRT Test device.
Today I picked up a "Heathkit CRT Tester and Rejuvenator IT-5230"
in case. It has 5 standard socket adaptors for various tubes plus two
more, including alligator clips, for the rest. Also 2 potentiometers, 4
meters, 6 switches, and 10 lights.
Knowing what I do about some people on the list getting stuck with
CRT's that are hard to replace I thought I would give this a try. Give
me an offer for shipping and handling and it's yours, else I think it
goes back in a week.
John A.
5:51 a.m.
New subject: Heathkit CRT Test device.
Don't do that - it can very helpfull in regenerating some old terminal CRT
tubes.
I am using this thing in any case for this purpose
gr.
Luc
-----Oorspronkelijk bericht-----
Van: cctalk-bounces(a)classiccmp.org
[mailto:cctalk-bounces@classiccmp.org]Namens John Allain
Verzonden: vrijdag 3 oktober 2003 15:31
Aan: General Discussion: On-Topic and Off-Topic Posts
Onderwerp: Re: Heathkit CRT Test device.
I'm probably tossing this tomorrow if there are no takers.
j
----- Original Message -----
From: John Allain <allain(a)panix.com>
To: CCTalk <cctalk(a)classiccmp.org>
Sent: Saturday, September 27, 2003 4:15 PM
Subject: Heathkit CRT Test device.
Today I picked up a "Heathkit CRT Tester and Rejuvenator IT-5230"
in case. It has 5 standard socket adaptors for various tubes plus two
more, including alligator clips, for the rest. Also 2 potentiometers, 4
meters, 6 switches, and 10 lights.
Knowing what I do about some people on the list getting stuck with
CRT's that are hard to replace I thought I would give this a try. Give
me an offer for shipping and handling and it's yours, else I think it
goes back in a week.
John A.
6:45 a.m.
New subject: Heathkit CRT Test device.
> I'm probably tossing this tomorrow if there
are no takers.
Don't do that - it can very helpfull in
regenerating some old
terminal CRT tubes. I am using this thing in any case for
this purpose
OK, notice to list. Ya' got three weeks to claim it or same
thing happens. Maybe a VCFw seller?
John A.
8:44 a.m.
New subject: Heathkit CRT Test device.
John,
I sent you a private message, but in case that didn't make it through, I'll
take it. Please contact me off-list with terms.
Best,
Patrick
-----Original Message-----
From: cctalk-bounces(a)classiccmp.org
[mailto:cctalk-bounces@classiccmp.org]On Behalf Of John Allain
Sent: Friday, October 03, 2003 11:46 AM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: Re: Heathkit CRT Test device.
> I'm probably tossing this tomorrow if
there are no takers.
Don't do that - it can very helpfull in
regenerating some old
terminal CRT tubes. I am using this thing in any case for
this purpose
OK, notice to list. Ya' got three weeks to claim it or same
thing happens. Maybe a VCFw seller?
John A.
28 Sep
28 Sep
12:11 a.m.
On Sat, 2003-09-27 at 19:42, Tim Shoppa wrote:
Yeah, I saw that when searching deja. Tried it, didn't work. I'm
wondering if this 'new' power supply also has a problem.
--
Christopher McNabb <cmcnabb(a)4mcnabb.net>
The McNabb Family
Error 61
M8190 Clock Error
On the front of your BA23 there are two DIPswitches. Flip the
direction of the one nearest the AC power switch. This will re-enable
60Hz clock interrupts, which is what self-test 61 looks for.
5:51 a.m.
New subject: Lantastic Network Software Version 7
One of my clients just gave me their copy of Lantastic Ver 7 (10 user).
Does anyone know if Lantastic Version 7 Network Software is compatible with
Windows 98 ?
I used to install and use Lantastic on many of my clients because it allowed
DOS, Windows 3.1, and Even Windows 95,
to share Drives and printers. It was really stable and reliable network
software.
Microsoft used to have drivers for Lantastic on Windows 95, but I think
dropped support after they ran them out of business.
I have an old DOS based computer with some very cool stuff on it, and it
would be fun to share printers and drives on it across my home network.
Also does anyone have a copy of Version 8, their last version before
Microsoft ran them out of business.
Thanks,
Phil
7:13 a.m.
New subject: Lantastic Network Software Version 7
On Sun, 28 Sep 2003, musicman38 wrote:
One of my clients just gave me their copy of Lantastic
Ver 7 (10 user).
Does anyone know if Lantastic Version 7 Network Software is compatible with
Windows 98 ?
Technically yes, realistically no. I had a lot of problems with it when
I was using it. If you have DOS boxes that you want to network with Win9x
then it's good for that, but on Win95 it was very buggy. Maybe it's more
stable on Win98. It should certainly work with it.
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
29 Sep
29 Sep
1 a.m.
New subject: Lantastic Network Software Version 7
> One of my clients just gave me their copy of
Lantastic Ver 7 (10 user).
> Does anyone know if Lantastic Version 7 Network Software is compatible
with
Windows 98 ?
Technically yes, realistically no. I had a lot of problems with it when
I was using it. If you have DOS boxes that you want to network with Win9x
then it's good for that, but on Win95 it was very buggy. Maybe it's more
stable on Win98. It should certainly work with it.
7751
days inactive
7760
days old
11 comments
8 participants
participants (8)
-
allain＠panix.com -
classiccmp＠trailing-edge.com -
cmcnabb＠4mcnabb.net -
kth＠srv.net -
luc＠e2t.be -
musicman38＠comcast.net -
patrick＠evocative.com -
vcf＠siconic.com