22 Mar
2006
22 Mar
'06
1:15 a.m.
On 3/22/06, Zane H. Healy <healyzh at aracnet.com> wrote:
Are you sure you have the part number correct? Are
you sure that
isn't a PCXGA-AV?
No. It's staring at me right now.
PCXAG-AV
155-0189-20 2360268 RevC
ACCELGRAPHICS INC. (c)1996 FALCON BOARD
I think it's a DEC OEM from AccelGraphics Inc.
4a. What DEC/Compaq video cards for the Alpha
aren't supported by OpenVMS?
PBXGA-JA DEC864
PBXGI-AA PowerStorm 4D40T
PBXGI-AB PowerStorm 4D50T
PBXGI-AD PowerStorm 4D51T
PBXGI-AC PowerStorm 4D60T
Hey! If the above isn't supported by OVMS, then what OS supports these? Tru64?
Especially the high-end PowerStorms...
22 Mar
22 Mar
4:37 a.m.
On Wed, 22 Mar 2006 14:15:57 +0800
"Wai-Sun Chia" <waisun.chia at gmail.com> wrote:
I used a PWS 500 au with a
PowerStorm 4D50T and Tru64 5.x for about two
years as a desktop machine. IIRC there where WinNT drivers also. The
4D50T is a bit odd. It is a pure GFX accelerator. It has a mezzanine PCI
card stacked on top with a simple VGA chip. The VGA does all video (e.g.
console text mode) until the Xserver with the right drivers is started.
Then the VGA is switched off and the signal from the 4D50T is looped
through to the monitor. It needs two PCI slots because of the VGA
mezzanine PCI card and the large heat sinks on the GFX chips. There are
DIMM slots for texture RAM... I found some GFX benchmarks that showed
that the 4D50T is in par with the SGI SolidIMPACT.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
4a. What
DEC/Compaq video cards for the Alpha aren't supported by
OpenVMS?
PBXGA-JA DEC864
PBXGI-AA PowerStorm 4D40T
PBXGI-AB PowerStorm 4D50T
PBXGI-AD PowerStorm 4D51T
PBXGI-AC PowerStorm 4D60T
Hey! If the above isn't supported by OVMS, then what OS supports
these? Tru64? Especially the high-end PowerStorms...
10:11 a.m.
On 3/22/06, Jochen Kunz <jkunz at unixag-kl.fh-kl.de> wrote:
I used a PWS 500 au with a PowerStorm 4D50T and Tru64
5.x for about two
years as a desktop machine. IIRC there where WinNT drivers also. The
4D50T is a bit odd. It is a pure GFX accelerator. It has a mezzanine PCI
card stacked on top with a simple VGA chip. The VGA does all video (e.g.
console text mode) until the Xserver with the right drivers is started.
What additional layered product do these high-end PowerStorms need?
2:26 p.m.
On Wed, 22 Mar 2006 23:11:32 +0800
"Wai-Sun Chia" <waisun.chia at gmail.com> wrote:
What additional layered product do these high-end
PowerStorms need?
I don't know if you need it for basic 2D X11 support, but my
machine
came with a OPEN3D PAK. Sorry, it is over 4 years ago that I instaled
the machine and I can't remember what OS components I installed on it.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
6679
days inactive
6679
days old
3 comments
2 participants
participants (2)
-
jkunz＠unixag-kl.fh-kl.de -
waisun.chia＠gmail.com