According to
the maintenance manual, line 1 cols 1 and 2 should
contain the ID of the module it
is looking for (18) and > 5 and 7
contain an error code (07).
I have not been able to determine what '07' means ... Perhaps its in
the
manual, but I have not found it yet. (Please > > bear with me, I
haven't seen a real live 5100 in aver 20 years, and I have never worked
on one before).
My 5100 maintenance manual is buried, but my 5110 manual says that error
"07" is a CRC error in the ROS. I have notes diagnosing a similar
problem indicating that one possible solution is to remove any tape in
the tape drive before powering on. Seems unlikely that this would work,
but you never know.
Hi Wayne,
Where exactly in the maintenance manual are the codes listed - I did not
find them when I looked.
Although the machine was stored with a tape in the drive (keep mice out),
I had already removed it before my tests.--
dave04a (at) Dave Dunfield
dunfield (dot) Firmware development services & tools: