22 May
2002
22 May
'02
3:42 a.m.
-----Original Message-----
From: Rod Young [mailto:rodyoung@shaw.ca]
anyone have an *extra* memory for the MV2000?
Define extra. :) You know they have 2M on board,
right? Do you have one without any add-in memory
option?
I've honestly never seen one like that. Again, I
have plenty of "spare" VAXStation 2000 stuff, but
I'd like to stay away from committing to ship
anything just now.
The only memory options I have are 2 and 4M boards,
which would give you a total of either 4 or 6M.
You do know that you can only fit one RAM board in a
system, right?
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'
22 May
22 May
4:21 a.m.
Yes, 2MB on board, but I'm looking for something bigger than the 4MB (it's
either 2 or 4) add-in memory card I already have installed (total 4/6MB). I
was going to replace the existing memory expansion with something bigger
if/when I find it.
I'm just getting the unit going, and need the BNC terminators to make the
ethernet happy, and also a cable ...08 to make the 9pin a console port (as
this is a VS2000).
rod
----- Original Message -----
From: "Christopher Smith" <csmith(a)amdocs.com
To: <cctalk(a)classiccmp.org
Sent: Wednesday, May 22, 2002 9:42 AM
Subject: RE: TK50Z-GA and MicroVax 3100/90?
----------------------------------------------------------------------------
----
-----Original
Message-----
From: Rod Young [mailto:rodyoung@shaw.ca]
anyone have an *extra* memory for the MV2000?
Define extra. :) You know they have 2M on board,
right? Do you have one without any add-in memory
option?
I've honestly never seen one like that. Again, I
have plenty of "spare" VAXStation 2000 stuff, but
I'd like to stay away from committing to ship
anything just now.
The only memory options I have are 2 and 4M boards,
which would give you a total of either 4 or 6M.
You do know that you can only fit one RAM board in a
system, right?
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'
--------------------------------------------------------------------------
-----------
The information contained in this message is proprietary of Amdocs,
protected from disclosure, and may be privileged.
The information is intended to be conveyed only to the designated
recipient(s)
of the message. If the reader of this message is not
the intended
recipient,
you are hereby notified that any dissemination, use,
distribution or
copying of
this communication is strictly prohibited and may be
unlawful.
If you have received this communication in error, please notify us
immediately
> by replying to the message and deleting it from your computer.
> Thank you.
--------------------------------------------------------------------------
-----------
8298
days inactive
8298
days old
1 comments
2 participants
participants (2)
-
csmith＠amdocs.com -
rodyoung＠shaw.ca