22 Feb
2018
22 Feb
'18
9:56 a.m.
I thought I would post a heads for
https://photos.app.goo.gl/36CxlZQJDssj5uLh1
I have the IBM 360 aluminum plate that goes on top, it is scratched. More
detailed and better pictures as I dig deeper.
For shipping a I will have professional box built by a friend who's hobby
is building
and restoring furniture.
Price to be determined and will go into my estate.
If interested please email me directly
pete at petelancashire dot com
Regards
-pete
22 Feb
22 Feb
6:24 p.m.
On 02/22/2018 11:56 AM, Pete Lancashire via cctalk wrote:
I thought I would post a heads for
https://photos.app.goo.gl/36CxlZQJDssj5uLh1
That is specifically a 360/50 front panel (upside down in
the picture).
Jon
6:31 p.m.
Jon,
Thank your for the type
Upside down since I'm no longer suppose to be lifting stuff and it is more
stable that way :-)
On Thu, Feb 22, 2018 at 6:24 PM, Jon Elson <elson at pico-systems.com> wrote:
On 02/22/2018 11:56 AM, Pete Lancashire via cctalk
wrote:
I thought I would post a heads for
https://photos.app.goo.gl/36CxlZQJDssj5uLh1
That is specifically a 360/50 front panel (upside down in the picture).
Jon
11:33 p.m.
New subject: Univac 9400 panel ( Was:Re: Will be up for sale in this calendar year 360 Front Panel)
On 22.02.2018 18:56, Pete Lancashire via cctalk wrote:
I thought I would post a heads for
https://photos.app.goo.gl/36CxlZQJDssj5uLh1
I have the IBM 360 aluminum plate that goes on top, it is scratched. More
detailed and better pictures as I dig deeper.
...and if someone needs a nice Univac 9400 console to go with that, I have one doing
nothing in my basement.
Good condition, but flatcables cut. Located in Switzerland I'm afraid.....
Was planning to one day add an FPGA behind it, but I now realized that I have enough on my
classiccmp plate as it is...
Jos
11:37 p.m.
New subject: Univac 9400 panel ( Was:Re: Will be up for sale in this calendar year 360 Front Panel)
have?the 360-30 ?aluminum?bar on top but not eh panel... wish?I had ? kept it! ?ca. 1980
when I ?got the bar... Ed#
?
In a message dated 2/23/2018 12:33:34 AM US Mountain Standard Time, cctalk at
classiccmp.org writes:
?
On 22.02.2018 18:56, Pete Lancashire via cctalk wrote:
I thought I would post a heads for
https://photos.app.goo.gl/36CxlZQJDssj5uLh1
I have the IBM 360 aluminum plate that goes on top, it is scratched. More
detailed and better pictures as I dig deeper.
...and if someone needs a nice Univac 9400 console to go with that, I have one doing
nothing in my basement.
Good condition, but flatcables cut. Located in Switzerland I'm afraid.....
Was planning to one day add an FPGA behind it, but I now realized that I have enough on my
classiccmp plate as it is...
Jos
2493
days inactive
2494
days old
4 comments
4 participants
participants (4)
-
couryhouse＠aol.com -
elson＠pico-systems.com -
jos.dreesen＠bluewin.ch -
pete＠petelancashire.com