22 Feb
2003
22 Feb
'03
1:40 p.m.
All,
Yeah, well... part of the fun was getting the consoles tied together
using a DECserver 300. The thing works, boots, loads the software,
and then... BANG. Dumps me into a very unwilling mode that just
gives me a # prompt, and then wants me to guess.
Anyone have the (pdf?) docs on this beast? I assumed it would be a
thing similar to the 200, but oh, was i wrong...
--f
22 Feb
22 Feb
2:04 p.m.
----- Original Message -----
From: "Fred N. van Kempen" <Fred.van.Kempen(a)microwalt.nl>
To: <cctalk(a)classiccmp.org>
Sent: Saturday, February 22, 2003 9:36 PM
Subject: DECserver 300 fun
All,
Yeah, well... part of the fun was getting the consoles tied together
using a DECserver 300. The thing works, boots, loads the software,
and then... BANG. Dumps me into a very unwilling mode that just
gives me a # prompt, and then wants me to guess.
Anyone have the (pdf?) docs on this beast? I assumed it would be a
thing similar to the 200, but oh, was i wrong...
--f
The # sounds like a password prompt. If you get any response when you key
<return> try "help". If it seems like a password prompt, try
"system". I
recently got a manual for the 300; if you have specific questions I can look
them up for you..
Stuart Johnson
23 Feb
23 Feb
1:16 a.m.
Yeah, well... part of the fun was getting the consoles
tied together
using a DECserver 300. The thing works, boots, loads the software,
and then... BANG. Dumps me into a very unwilling mode that just
gives me a # prompt, and then wants me to guess.
"access" is the default password at the #. "system" is the default
password for the SET PRIV command.
<PLUG> There is a DECserver 500 configuration manual available on Ebay
right now which will answer most all configuration related questions.
Most even applies to the 300. </PLUG>
--
7926
days inactive
7927
days old
2 comments
3 participants
participants (3)
-
Fred.van.Kempen＠microwalt.nl -
ssj152＠charter.net -
thompson＠new.rr.com