Frederik Meerwaldt wrote: I don't have one, it's up on ebay: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=457685543 So far $31(US), reserve not met. No DECNA (I guess). -- Linux Home Automation Neil Cherry ncherry(a)home.net http://members.home.net/ncherry (Text only) http://meltingpot.fortunecity.com/lightsey/52 (Graphics) http://linuxha.sourceforge.net/ (SourceForge)

Jerome Fine replies: About the only reason to take EVERYTHING out is that the BA123 box is VERY heavy even with everything out - especially for one person - or at least it is for me at my stage at 62. But, if you find that two people are easily able to handle the full BA123 box, then you are not likely to gain any additional comfort for the HDDs if you can handle the BA123 box carefully even when fully loaded. And place it on a couple of blankets inside the vehicle to cushion shock while driving. The drive most likely to fail all by itself over time is an RD53. If you have those, look for replacements right away. If you do want to take the HDD from the BA123, there is a certain order to removing the panels!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (a) The long side panels FIRST since they hold the front panel in place. The trick is to slide the side panel up an inch or even less and then angle it out and free it from the front panel. Also, look for hold down bolts FIRST and remove them from those side panels. One is at the bottom of the side panel at the front on the left side (port) and one at the back bottom on the right side (starboard). (b) Then the front plastic panel - be careful - it is not delicate, but don't force. (c) The rest does not really matter. Sincerely yours, Jerome Fine