11 Jun
2004
11 Jun
'04
12:58 a.m.
Hi all,
Does anyone here own or use a HP 1650B (or 1651B) logic analyser?
Do they need DSDD 3.5" disks or can they accept DSHDs as well?
I ask because someone has just offered me a HP 1650B - system disk, a few
pods and a 1650B analyser - but doesn't have any manuals or know what type of
disk it needs. I'm guessing DSDD-only, given that the system disk is
supposedly DSDD.
Is it possible to duplicate the operating system boot disk using standard
hardware (i.e. a PC or my RISC PC)?
Anyone got PDF versions of the Operator's Manual, Service Manual and/or
Programming Manual?
Sorry for the OT-ness of this message - sure, it's not a computer, but it
meets the 10-year-rule - the power-on selftest screen displays "COPYRIGHT
1987", so that would make the firmware, what, 16 years old?
Thanks.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem(a)dsl.pipex.com | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
... How come all the buttons keep flying off my shirt?
11 Jun
11 Jun
1:57 a.m.
At 10:58 AM 6/11/04 +0100, you wrote:
Hi all,
Does anyone here own or use a HP 1650B (or 1651B) logic analyser?
Do they need DSDD 3.5" disks or can they accept DSHDs as well?
I ask because someone has just offered me a HP 1650B - system disk, a few
pods and a 1650B analyser - but doesn't have any manuals or know what type of
disk it needs. I'm guessing DSDD-only, given that the system disk is
supposedly DSDD.
I strongly suspect it will require 720k disks. Most of the HP disk
drives do and they WILL NOT accept a 1.44Mb disk.
Is it possible to duplicate the operating system boot
disk using standard
hardware (i.e. a PC or my RISC PC)?
Teledisk should be able to do it. The LIF Utilities should be able to
read and write the disks and tranfer the contents to a PC.
Joe
Anyone got PDF versions of the Operator's Manual, Service Manual and/or
Programming Manual?
Sorry for the OT-ness of this message - sure, it's not a computer, but it
meets the 10-year-rule - the power-on selftest screen displays "COPYRIGHT
1987", so that would make the firmware, what, 16 years old?
Thanks.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem(a)dsl.pipex.com | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
... How come all the buttons keep flying off my shirt?
8:08 a.m.
In message <3.0.6.32.20040611065729.0085c100(a)pop-server.cfl.rr.com>
"Joe R." <rigdonj(a)cfl.rr.com> wrote:
Hmm, I've never used Teledisk, but I've got a copy of CopyIIPC6 on my 33MHz
386 DOS box. Rumour has it the 165xB analysers had a firmware modification
that enabled them to write PC-formatted floppies. I may have to try that out
when the analyser arrives. The problem then becomes a data decoding issue,
rather than a data transfer issue.
Now I just need a GPIB (IEEE-488) interface card (ISA or PCI bus) and a few
GPIB cables. Anyone got some spares?
Thanks.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem(a)dsl.pipex.com | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
... Laugh ? I nearly paid the poll-tax
I strongly suspect it will require 720k disks. Most
of the HP disk
drives do and they WILL NOT accept a 1.44Mb disk.
That shouldn't be a big problem, I just found a bunch of old antivirus update
disks (dated 1994!) in a drawer, so I've reformatted the disks. That leaves
me with a small stack of 720K floppies, ready for re-using.
Is it possible
to duplicate the operating system boot disk using standard
hardware (i.e. a PC or my RISC PC)?
Teledisk should be able to do it. The LIF Utilities should be able to
read and write the disks and tranfer the contents to a PC.
10:17 a.m.
At 06:08 PM 6/11/04 +0100, you wrote:
In message
<3.0.6.32.20040611065729.0085c100(a)pop-server.cfl.rr.com>
"Joe R." <rigdonj(a)cfl.rr.com> wrote:
Hmm, I've never used Teledisk, but I've got a copy of CopyIIPC6 on my 33MHz
386 DOS box. Rumour has it the 165xB analysers had a firmware modification
that enabled them to write PC-formatted floppies. I may have to try that out
when the analyser arrives. The problem then becomes a data decoding issue,
rather than a data transfer issue.
Now I just need a GPIB (IEEE-488) interface card (ISA or PCI bus) and a few
GPIB cables. Anyone got some spares?
yeap. Picked up a NI GPIB-AT card and some cables on a scrounging trip
this morning. Do you want to pay shipping from Florida?
(trying to type with one hand while a parrot and a macaw roost in the other)
Joe
I strongly suspect it will require 720k disks.
Most of the HP disk
drives do and they WILL NOT accept a 1.44Mb disk.
That shouldn't be a big problem, I just found a bunch of old antivirus update
disks (dated 1994!) in a drawer, so I've reformatted the disks. That leaves
me with a small stack of 720K floppies, ready for re-using.
Is it
possible to duplicate the operating system boot disk using standard
hardware (i.e. a PC or my RISC PC)?
Teledisk should be able to do it. The LIF Utilities should be able to
read and write the disks and tranfer the contents to a PC.
Thanks.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem(a)dsl.pipex.com | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
... Laugh ? I nearly paid the poll-tax
11:26 a.m.
On Fri, 11 Jun 2004, Joe R. wrote:
(trying to type with one hand while a parrot and a
macaw roost in the
other)
Dinner?
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
7380
days inactive
7380
days old
5 comments
3 participants
participants (3)
-
philpem＠dsl.pipex.com -
rigdonj＠cfl.rr.com -
vcf＠siconic.com