22 Jun
2016
22 Jun
'16
7:17 a.m.
+1 You tell em Will!
-Connor K
On Jun 21, 2016 4:05 PM, William Donzelli <wdonzelli at gmail.com> wrote:
I have sent Todd his contact info. He is willing
to let one person come in and take pics and post to the group. He does NOT want to move
one or 2 items of the most value; he wants to move out pallets of stuff. He is not closing
shop; he just wants to move out some really old equip that has been there for years.
Be sure to tell your friend that the mainframe collectors can
certainly make cubic feet of equipment leave the warehouse quickly!
--
Will 
22 Jun
22 Jun
7:23 a.m.
I'm set up to go onsite this afternoon, and I've got new SD cards and two
batteries for the camera. Once I've figured out a good place to post them,
I'll pass the link along. I think this is more of a corporate/enterprise
collection so I'm not expecting SGI - but he's got a lot of stuff.
You never know what you'll find on this kind of run..Should be fun!
Todd Killingsworth
On Wed, Jun 22, 2016 at 10:17 AM, Connor Krukosky <connork at connorsdomain.com
wrote:
> +1 You tell em Will!
>
> -Connor K
>
> On Jun 21, 2016 4:05 PM, William Donzelli <wdonzelli at gmail.com wrote:
> >
> > > I have sent Todd his contact info. He is willing to let one person
> come in and take pics and post to the group. He does NOT want to move one
> or 2 items of the most value; he wants to move out pallets of stuff. He is
> not closing shop; he just wants to move out some really old equip that has
> been there for years.
> >
> > Be sure to tell your friend that the mainframe collectors can
> > certainly make cubic feet of equipment leave the warehouse quickly!
> >
> > --
> > Will
>
7:55 a.m.
On Jun 22, 2016, at 07:23, Todd Killingsworth
<killingsworth.todd at gmail.com> wrote:
I'm set up to go onsite this afternoon, and I've got new SD cards and two
batteries for the camera. Once I've figured out a good place to post them,
I'll pass the link along. I think this is more of a corporate/enterprise
collection so I'm not expecting SGI - but he's got a lot of stuff.
You never know what you'll find on this kind of run..Should be fun!
I'm looking forward to seeing what you find!
On Jun 21, 2016, at 13:05, William Donzelli
<wdonzelli at gmail.com> wrote:
Be sure to tell your friend that the mainframe collectors can
certainly make cubic feet of equipment leave the warehouse quickly!
In case it helps any mainframe collectors, I just checked, and ramen noodle soup costs
around $0.41 per meal on Amazon Prime. I'm still working on the problem creating more
cubic feet^H^H^H^Hyards of available volume in a small house, though.
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
24 Jun
24 Jun
6:49 a.m.
On Jun 22, 2016, at 07:23, Todd Killingsworth <
killingsworth.todd at gmail.com> wrote:
I'm set up to go onsite this afternoon, and
I've got new SD cards and two
I assume Todd is lost in the warehouse, or just kept all of the new-in-box
Lisp machines, SGIs, and System 360s for himself!
--
Ben Sinclair
ben at bensinclair.com
7:25 a.m.
On Fri, 24 Jun 2016, Ben Sinclair wrote:
killingsworth.todd at gmail.com> wrote:
> I'm set up to go onsite this afternoon, and I've got new SD cards and two
I assume Todd is lost in the warehouse, or just kept
all of the
new-in-box Lisp machines, SGIs, and System 360s for himself!
He's probably still waiting for some of them to boot up. *ducks* :-P
-Swift
7:39 a.m.
Heh. No, guys - I've not bought the whole building!
I've got the 100+ pictures loaded up for editing, but I still have to
resize them to jpg. No SGI, a few IBM big peripherals, some DEC VAX and
Alpha boxes (no PDP anything), a Sun E3K, and $DEITY's own collection of
terminals and keyboards.
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I'll get pics up somewhere this weekend and share the link
Todd Killingsworth
On Fri, Jun 24, 2016 at 10:25 AM, Swift Griggs <swiftgriggs at gmail.com>
wrote:
On Fri, 24 Jun 2016, Ben Sinclair wrote:
killingsworth.todd at gmail.com> wrote:
> I'm set up to go onsite this afternoon, and I've got new SD cards and
two
I assume Todd is lost in the warehouse, or just
kept all of the
new-in-box Lisp machines, SGIs, and System 360s for himself!
He's probably still waiting for some of them to boot up. *ducks* :-P
-Swift
7:45 a.m.
Can't wait to see! A real VT-100 would be a prized possession. Not
sure how to get it to Seattle though. I see too many horror stories
about shipping terminals.
--Jason
On 06/24/2016 07:39 AM, Todd Killingsworth wrote:
Heh. No, guys - I've not bought the whole
building!
I've got the 100+ pictures loaded up for editing, but I still have to
resize them to jpg. No SGI, a few IBM big peripherals, some DEC VAX and
Alpha boxes (no PDP anything), a Sun E3K, and $DEITY's own collection of
terminals and keyboards.
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I'll get pics up somewhere this weekend and share the link
Todd Killingsworth
On Fri, Jun 24, 2016 at 10:25 AM, Swift Griggs <swiftgriggs at gmail.com>
wrote:
> On Fri, 24 Jun 2016, Ben Sinclair wrote:
>> killingsworth.todd at gmail.com> wrote:
>>> I'm set up to go onsite this afternoon, and I've got new SD cards and
> two
>
>> I assume Todd is lost in the warehouse, or just kept all of the
>> new-in-box Lisp machines, SGIs, and System 360s for himself!
> He's probably still waiting for some of them to boot up. *ducks* :-P
>
> -Swift
>
8:35 a.m.
On Fri, Jun 24, 2016 at 10:45 AM, Jason Howe <jason at smbfc.net> wrote:
Can't wait to see! A real VT-100 would be a
prized possession. Not sure
how to get it to Seattle though. I see too many horror stories about
shipping terminals.
It can be tough to ship CRTs (step 1, don't put them in a tiny box...)
I don't get out to Seattle, but if you drive out to a VCFmw or VCFe
some time, I've been known to bring dumb terminals to sell. I don't
want to ship them either.
-ethan
8:41 a.m.
On 06/24/2016 09:45 AM, Jason Howe wrote:
Can't wait to see! A real VT-100 would be a
prized
possession. Not sure how to get it to Seattle though. I
see too many horror stories about shipping terminals.
I just shipped two 13" green screen monitors in their
original shipping cartons to two guys on this list. These
were new replacements we picked up at a surplus place 30
years ago and never used. I think they will come through
fine, but will know in a couple of days. I shipped them
FedEx ground, which has always done VERY well for me.
Jon
8:59 a.m.
Can't wait to see! A real VT-100 would be a
prized possession. Not sure
how to get it to Seattle though. I see too many horror stories about
shipping terminals.
And terminals in the VT100 family are probably the most difficult to
ship (closely followed by the VT50 family).
--
Will
9:49 a.m.
On Fri, Jun 24, 2016 at 11:59 AM, William Donzelli <wdonzelli at gmail.com> wrote:
And terminals in the VT100 family are probably the
most difficult to
ship (closely followed by the VT50 family).
Most definitely. Having dealt with a *lot* of terminals, and had many
of them shipped to me - I have had at least two VT100's broken in
shipping. The problem is that there isn't much holding that upper
housing on, and it gets pretty brittle with age. Even a well packed
one has a good chance of being broken in transit. Other terminals that
are difficult to ship include the Zenith Z19 - the picture tube tends
to break the posts that hold it in - that plastic has gotten kind of
brittle.
The VT50 series, while big and bulky, is fairly sturdy and shippable,
but the sheer size is a real problem.
I don't even want to think about shipping a VT05. That thing is heavy,
deep, and fragile.
-Ian
7:55 a.m.
On Fri, Jun 24, 2016 at 9:39 AM, Todd Killingsworth <
killingsworth.todd at gmail.com> wrote:
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
That still sounds great! I'd also love a DEC terminal of some kind... I got
rid of a VT-100 years ago and regret it. Some of the AT&T machines were
interesting too!
--
Ben Sinclair
ben at bensinclair.com
9:38 a.m.
Todd wrote...
-----
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP terminals (or
monitor/keyboard combos for HP PA-RISC machines??). Also oddballs like AT&T, Qume,
Texas Instruments, WISE, etc.
----
I'd very much love a pair of 3278's or 3279's.
I think I have more than enough HP terminals to last me, I think the only terminals
I'd still make room for are MicroTerm ACT/Mime, or a mint condition ADDS Consul or the
right model of ADDS Regent.
J
9:54 a.m.
On Fri, Jun 24, 2016 at 10:39 AM, Todd Killingsworth
<killingsworth.todd at gmail.com> wrote:
Terminals from IBM Mainframes and midrange, pallets of
DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I'm looking for HP 264x terminals and parts - especially keyboards.
Likewise, HP 262x terminals, parts and keyboards.
In the realm of weird terminals, I've been looking for an Ann Arbor
Ambassador for close to fifteen years now. Please let me know if you
find one.
-Ian
10 a.m.
Ian wrote...
-----
I'm looking for HP 264x terminals and parts - especially keyboards.
Likewise, HP 262x terminals, parts and keyboards.
-----
What 264x parts do you need? I have three 264x terminals that were far gone enough that I
am using them as parts donors for my other 264x's. Let me know what parts you are
looking for...
I'll take a IBM 360 model 91 in trade ;)
J
10:01 a.m.
On Fri, 24 Jun 2016, Ian Primus wrote:
On Fri, Jun 24, 2016 at 10:39 AM, Todd Killingsworth
<killingsworth.todd at gmail.com> wrote:
Ditto. Also HP 2392 terminals and keyboards.
HP 262x terminals don't ship well. The "ET" terminals must be packed
carefully.
Mike Loewen mloewen at cpumagic.scol.pa.us
Old Technology http://q7.neurotica.com/Oldtech/
Terminals from IBM Mainframes and midrange,
pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I'm looking for HP 264x terminals and parts - especially keyboards.
Likewise, HP 262x terminals, parts and keyboards.
10:11 a.m.
Mike wrote...
-----
HP 262x terminals don't ship well. The "ET" terminals must be packed
carefully.
----
That is very true. I could use one of those large black plastic pieces that
hold the monitor open. Mine broke'ted.
HP 264X terminals on the other hand, do ship well because they are most
definitely built like a tank. That being said, I did have one shipped to me
a few years back (posted pictures to the list) that a shipper managed to
completely destroy. They put it in a box that was twice the size of the
terminal in all directions, and put absolutely nothing else in the box
besides filling about 1/2 the box with foam peanuts. One could not imagine a
264X could look like it was put in a blender, but this one literally poured
out of the box. *sigh*
J
10:30 a.m.
On Fri, 24 Jun 2016, Jay West wrote:
[...] besides filling about 1/2 the box with foam
peanuts. One could not
imagine a 264X could look like it was put in a blender, but this one
literally poured out of the box. *sigh*
It's amazing how much stuff UPS had managed to destroy "for" me, also.
It's like them drop the boxes off a crane or something.
I wish one of these shippers would develop a glass-coke-bottle style
business model. You ask for a secure container and they can either be
delivered for $$$ or you can pick them up. The containers should be made
from real materials (wood or something strong with nice
foam suspension or
padding with FRAGILE printed all over them). When a buyer
decides they
want this service, they pay a small deposit fee which is refunded when
they put the empty container out by the street for the shipper to pick up
the next day. Then they refund your deposit.
I'd definitely pay extra for that for many delicate items. Maybe someone
already does that sort of thing but it's just not the kind of thing I've
ever heard of from OOOPS, Federal Compress, or USPS.
Sure you can pay extra to insure your items, but what if they were super
hard to get?
-Swift
10:34 a.m.
On Jun 24, 2016, at 10:30, Swift Griggs
<swiftgriggs at gmail.com> wrote:
I wish one of these shippers would develop a glass-coke-bottle style
business model. You ask for a secure container and they can either be
delivered for $$$ or you can pick them up. The containers should be made
from real materials (wood or something strong with nice foam suspension or
padding with FRAGILE printed all over them).
A crate will protect better against being squished by other cargo, but it's still up
to the shipper to know how to secure the item inside well enough to withstand shock. A
fully assembled heavy thing inside a fragile plastic case may not make it intact no matter
how good the padding is.
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
10:47 a.m.
On Fri, 24 Jun 2016, Swift Griggs wrote:
It's amazing how much stuff UPS had managed to
destroy "for" me, also.
It's like them drop the boxes off a crane or something.
There is talk about "drone parcel delivery".
Do UPS and USPS drop their packages from drones or planes?
Or are they doing their deliveries by trebuchet? (catapult)
10:49 a.m.
I always thought that they 'preconditioned' the packages by running them over with
a forklift before shipping, so that they could be packed more closely together.
----- Original Message -----
From: "Fred Cisin" <cisin at xenosoft.com>
To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>
Sent: Friday, June 24, 2016 10:47:46 AM
Subject: RE: old friend is slimming down the warehouse
On Fri, 24 Jun 2016, Swift Griggs wrote:
It's amazing how much stuff UPS had managed to
destroy "for" me, also.
It's like them drop the boxes off a crane or something.
There is talk about "drone parcel delivery".
Do UPS and USPS drop their packages from drones or planes?
Or are they doing their deliveries by trebuchet? (catapult)
11:53 a.m.
On 6/24/2016 11:47 AM, Fred Cisin wrote:
On Fri, 24 Jun 2016, Swift Griggs wrote:
It's amazing how much stuff UPS had managed
to destroy "for" me, also.
It's like them drop the boxes off a crane or something.
There is talk about "drone parcel delivery".
Do UPS and USPS drop their packages from drones or planes? Or are they doing their deliveries by trebuchet?
(catapult)
Just the OVERSEAS ones!
27 Jun
27 Jun
5:42 a.m.
On 24 June 2016 at 19:30, Swift Griggs <swiftgriggs at gmail.com> wrote:
It's amazing how much stuff UPS had managed to
destroy "for" me, also.
It's like them drop the boxes off a crane or something.
Sounds to me -- as a foreigner, mind -- that there's the basis for a
small business here: continental-North-America guaranteed custom
fragile item delivery.
--
Liam Proven ? Profile: http://lproven.livejournal.com/profile
Email: lproven at cix.co.uk ? GMail/G+/Twitter/Flickr/Facebook: lproven
MSN: lproven at hotmail.com ? Skype/AIM/Yahoo/LinkedIn: liamproven
Cell/Mobiles: +44 7939-087884 (UK) ? +420 702 829 053 (?R)
7:20 a.m.
On Mon, 27 Jun 2016, Liam Proven wrote:
Sounds to me -- as a foreigner, mind -- that
there's the basis for a
small business here: continental-North-America guaranteed custom
fragile item delivery.
. . . and your ads should have a picture of a trebuchet with a red circle
around it and diagonal line through it.
24 Jun
24 Jun
10:01 a.m.
On Jun 24, 2016, at 07:39, Todd Killingsworth
<killingsworth.todd at gmail.com> wrote:
some DEC VAX and
Alpha boxes (no PDP anything),
Oooh, I'm curious about what VAX boxes are in there.
I didn't see any printers mentioned, but I'm specifically looking for a DEC LP32
series band printer, or perhaps another printer made for use with the DMF32 controller.
http://vt100.net/docs/tp83/chapter16.html
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
12:17 p.m.
On Fri, Jun 24, 2016 at 1:01 PM, Mark J. Blair <nf6x at nf6x.net> wrote:
I didn't see any printers mentioned, but I'm
specifically looking for a DEC LP32 series band printer, or perhaps another printer made
for use with the DMF32 controller.
http://vt100.net/docs/tp83/chapter16.html
We had an LP25 on our DMF32. ISTR it's a Dataproducts B300 or
something close to that. It was a bit fiddly when it got old (I was
the one that got to fix it when it broke), but we ran multiple boxes
of paper through it per day. It was _the_ printer on a VAX-11/750
with 75 to 10 users (decreasing over time)... developers code
listings, non-letter-quality documentation (serial LA210 for the "good
stuff", used sparingly), diagnostic sheets in every product box,
e-mails, calendars, customer lists... ASCII art. ;-)
I think there's a simple circuit (a few TTL inverters and a pin
swabbing cable) to use an LA-180 (i.e., _non_ Dataproducts printer) on
the DC37 on a DMF-32. The basic lines are all the same but a couple
of them need their sense inverted. An LA-180 is much lighter
(van-sized and small pallet) as long as you don't need massive
volumes. One could also rig up a Personal Computer-grade dot matrix
printer with a Centronics interface similarly, if the goal is just to
have some form of hardcopy, not specifically to "enjoy" the
band/chain-printer experience. It is fun, though, watching and
listening to a band printer fire up and zip through greenbar paper.
-ethan
12:26 p.m.
Ethan - There are pallets of printers as well, although I don't remember
any of the brands besides Okidata.
TK
On Fri, Jun 24, 2016 at 3:17 PM, Ethan Dicks <ethan.dicks at gmail.com> wrote:
On Fri, Jun 24, 2016 at 1:01 PM, Mark J. Blair
<nf6x at nf6x.net> wrote:
I didn't see any printers mentioned, but
I'm specifically looking for a
DEC LP32 series band printer, or perhaps another
printer made for use with
the DMF32 controller.
We had an LP25 on our DMF32. ISTR it's a Dataproducts B300 or
something close to that. It was a bit fiddly when it got old (I was
the one that got to fix it when it broke), but we ran multiple boxes
of paper through it per day. It was _the_ printer on a VAX-11/750
with 75 to 10 users (decreasing over time)... developers code
listings, non-letter-quality documentation (serial LA210 for the "good
stuff", used sparingly), diagnostic sheets in every product box,
e-mails, calendars, customer lists... ASCII art. ;-)
I think there's a simple circuit (a few TTL inverters and a pin
swabbing cable) to use an LA-180 (i.e., _non_ Dataproducts printer) on
the DC37 on a DMF-32. The basic lines are all the same but a couple
of them need their sense inverted. An LA-180 is much lighter
(van-sized and small pallet) as long as you don't need massive
volumes. One could also rig up a Personal Computer-grade dot matrix
printer with a Centronics interface similarly, if the goal is just to
have some form of hardcopy, not specifically to "enjoy" the
band/chain-printer experience. It is fun, though, watching and
listening to a band printer fire up and zip through greenbar paper.
-ethan
12:31 p.m.
On Fri, Jun 24, 2016 at 3:26 PM, Todd Killingsworth
<killingsworth.todd at gmail.com> wrote:
Ethan - There are pallets of printers as well,
although I don't remember
any of the brands besides Okidata.
I don't need printers (I have *lots*, but the old LP25 did not make
the cut when I was clearing out my office in 1993...), but I was
making the suggestion to Mark that there are many options he could
explore if he's willing to make a converter box and not just run a
DC37 cable from a line printer to his interface. Sure, the right
printer is just a passive cable away from working, but line printers
can be expensive to ship and hard to maintain and it's not the only
solution.
-ethan
1:38 p.m.
I believe there is a list member in Florida with a band printer he might
part with,
On Fri, Jun 24, 2016 at 2:31 PM, Ethan Dicks <ethan.dicks at gmail.com> wrote:
On Fri, Jun 24, 2016 at 3:26 PM, Todd Killingsworth
<killingsworth.todd at gmail.com> wrote:
Ethan - There are pallets of printers as well,
although I don't remember
any of the brands besides Okidata.
I don't need printers (I have *lots*, but the old LP25 did not make
the cut when I was clearing out my office in 1993...), but I was
making the suggestion to Mark that there are many options he could
explore if he's willing to make a converter box and not just run a
DC37 cable from a line printer to his interface. Sure, the right
printer is just a passive cable away from working, but line printers
can be expensive to ship and hard to maintain and it's not the only
solution.
-ethan
3:53 p.m.
Any 64 bit sun stuff in there? I would be interested in those. But from
the sounds of things it's an older collection, so probably not.
3:27 p.m.
On Jun 24, 2016, at 12:17 , Ethan Dicks
<ethan.dicks at gmail.com> wrote:
We had an LP25 on our DMF32. ISTR it's a Dataproducts B300 or
something close to that.
That sounds right. I googled for Dataproducts B300 pictures, and they look awfully similar
to the manual pictures I've seen of the LP32. Also, that web page I linked to lists
the LP32 as an LP26 variant.
I think there's a simple circuit (a few TTL
inverters and a pin
swabbing cable) to use an LA-180 (i.e., _non_ Dataproducts printer) on
the DC37 on a DMF-32.
I think an LA180 wouldn't be much different than the Decwriter III I'm already
using as a console, so I don't see much point in adding one.
to "enjoy" the
band/chain-printer experience. It is fun, though, watching and
listening to a band printer fire up and zip through greenbar paper.
Yes, that enjoyment is what I'm going for. And also, that plug on the back of my
11/730 is marked "LP32", so I need to fill the hole with the right thing if
I'm to be able to sleep at night. :)
Now, I'd also love a great big drum printer, with a suitable computer hooked up to it.
In my freshman year of college, I recall being shown a large PDP-8 system with a massive
drum printer and a hard drive the size of two washer/dryer units, sitting right next to
the Hypercube in the same small room. It was suggested that the system was very long in
the tooth and might just be available, and I wish I could go back in time to pursue
getting it...
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
5:07 p.m.
On 24/06/2016 23:27, "Mark J. Blair" <nf6x at nf6x.net> wrote:
There's still an LP26 at my work, after dragging an LP25 down 2 flights of
stairs nearly killed 3 of us we wisely decided to leave the other one in
situ.
Still up for grabs if you bring enough people to Newmarket, UK, formerly of
Europe.
--
Adrian/Witchy
Binary Dinosaurs creator/curator
Www.binarydinosaurs.co.uk - the UK's biggest private home computer
collection?
On Jun 24, 2016, at 12:17 , Ethan Dicks
<ethan.dicks at gmail.com> wrote:
We had an LP25 on our DMF32. ISTR it's a Dataproducts B300 or
something close to that.
That sounds right. I googled for Dataproducts B300 pictures, and they look
awfully similar to the manual pictures I've seen of the LP32. Also, that web
page I linked to lists the LP32 as an LP26 variant.
5:15 p.m.
On Jun 24, 2016, at 17:07 , Adrian Graham <witchy
at binarydinosaurs.co.uk> wrote:
Still up for grabs if you bring enough people to Newmarket, UK, formerly of
Europe.
Maybe after I fit pontoons to my pickup truck! :D
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
5:26 p.m.
On 25/06/2016 01:15, "Mark J. Blair" <nf6x at nf6x.net> wrote:
Bring some VT100s with you and you've got a deal!
(I wish I wasn't joking)
--
Adrian/Witchy
Binary Dinosaurs creator/curator
Www.binarydinosaurs.co.uk - the UK's biggest private home computer
collection?
On Jun 24, 2016, at 17:07 , Adrian Graham
<witchy at binarydinosaurs.co.uk>
wrote:
Still up for grabs if you bring enough people to Newmarket, UK, formerly of
Europe.
Maybe after I fit pontoons to my pickup truck! :D 
8:06 p.m.
Rather have a C Itoh CT-101e .. knew one of the developers, F/W was
done in the US I can no longer remember the key combination but the
terminal would let you know who did it
Anyone wants to gain a cubic foot or two let me know
-pete
On Fri, Jun 24, 2016 at 5:26 PM, Adrian Graham
<witchy at binarydinosaurs.co.uk> wrote:
On 25/06/2016 01:15, "Mark J. Blair"
<nf6x at nf6x.net> wrote:
Bring some VT100s with you and you've got a deal!
(I wish I wasn't joking)
--
Adrian/Witchy
Binary Dinosaurs creator/curator
Www.binarydinosaurs.co.uk - the UK's biggest private home computer
collection?
On Jun 24, 2016, at 17:07 , Adrian Graham
<witchy at binarydinosaurs.co.uk>
wrote:
Still up for grabs if you bring enough people to Newmarket, UK, formerly of
Europe.
Maybe after I fit pontoons to my pickup truck! :D 
25 Jun
25 Jun
11:35 p.m.
On Sat, Jun 25, 2016 at 01:26:12AM +0100, Adrian Graham wrote:
On 25/06/2016 01:15, "Mark J. Blair"
<nf6x at nf6x.net> wrote:
Bring some VT100s with you and you've got a deal!
(I wish I wasn't joking)
We should arrange for a container to go yearly between the states and EU..
alternatively when it is full.
/P
On Jun 24, 2016, at 17:07 , Adrian Graham
<witchy at binarydinosaurs.co.uk>
wrote:
Still up for grabs if you bring enough people to Newmarket, UK, formerly of
Europe.
Maybe after I fit pontoons to my pickup truck! :D
11:47 p.m.
On Jun 25, 2016, at 23:35, Pontus Pihlgren <pontus
at Update.UU.SE> wrote:
We should arrange for a container to go yearly between the states and EU..
alternatively when it is full.
Let's have it travel by truck and/or rail across the continents at each end, bouncing
between the US west coast and easternish Europe, making many stops along the way!
Can the military radio folks share the container? Much of the military radio gear is big,
too.
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
24 Jun
24 Jun
10:18 a.m.
On Jun 24, 2016, at 7:39 AM, Todd Killingsworth
<killingsworth.todd at gmail.com> wrote:
Heh. No, guys - I've not bought the whole building!
I've got the 100+ pictures loaded up for editing, but I still have to
resize them to jpg. No SGI, a few IBM big peripherals, some DEC VAX and
Alpha boxes (no PDP anything), a Sun E3K, and $DEITY's own collection of
terminals and keyboards.
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I call dibs on any and all AT&T terminals and 3B2 stuff! :^)
-Seth
10:23 a.m.
Seth - I specifically asked about 3B2 boxes when I saw the AT&T terminals.
Unfortunately, the guy has already cleared them out of his warehouse.
Todd Killingsworth
On Fri, Jun 24, 2016 at 1:18 PM, Seth Morabito <lists at loomcom.com> wrote:
On Jun 24,
2016, at 7:39 AM, Todd Killingsworth <
killingsworth.todd at gmail.com>
wrote:
Heh. No, guys - I've not bought the whole building!
I've got the 100+ pictures loaded up for editing, but I still have to
resize them to jpg. No SGI, a few IBM big peripherals, some DEC VAX
and
Alpha boxes (no PDP anything), a Sun E3K, and
$DEITY's own collection of
terminals and keyboards.
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I call dibs on any and all AT&T terminals and 3B2 stuff! :^)
-Seth
10:24 a.m.
Seth, cont. ... and be careful what you wish for. I think that he may
have a full 6'x6'x6' pallet of AT&T terminals for you :)
TK
On Fri, Jun 24, 2016 at 1:23 PM, Todd Killingsworth <
killingsworth.todd at gmail.com> wrote:
Seth - I specifically asked about 3B2 boxes when I saw
the AT&T
terminals. Unfortunately, the guy has already cleared them out of his
warehouse.
Todd Killingsworth
On Fri, Jun 24, 2016 at 1:18 PM, Seth Morabito <lists at loomcom.com> wrote:
On Jun
24, 2016, at 7:39 AM, Todd Killingsworth <
killingsworth.todd at gmail.com>
wrote:
Heh. No, guys - I've not bought the whole building!
I've got the 100+ pictures loaded up for editing, but I still have to
resize them to jpg. No SGI, a few IBM big peripherals, some DEC VAX
and
Alpha boxes (no PDP anything), a Sun E3K, and
$DEITY's own collection
of
terminals and keyboards.
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I call dibs on any and all AT&T terminals and 3B2 stuff! :^)
-Seth
11:53 a.m.
Any more details on those AT&T terminals?
I could use an AT&T 605 terminal for the 3b2 I hope to someday acquire,
obviously after Seth gets all he needs. :)
Jerry
On 06/24/16 12:24 PM, Todd Killingsworth wrote:
Seth, cont. ... and be careful what you wish for. I
think that he may
have a full 6'x6'x6' pallet of AT&T terminals for you :)
TK
On Fri, Jun 24, 2016 at 1:23 PM, Todd Killingsworth <
killingsworth.todd at gmail.com> wrote:
> Seth - I specifically asked about 3B2 boxes when I saw the AT&T
> terminals. Unfortunately, the guy has already cleared them out of his
> warehouse.
>
> Todd Killingsworth
>
> On Fri, Jun 24, 2016 at 1:18 PM, Seth Morabito <lists at loomcom.com> wrote:
>
>> I call dibs on any and all AT&T terminals
and 3B2 stuff! :^)
>>
>> -Seth
>>
>>
>
7:41 p.m.
On Fri, Jun 24, 2016, Jerry Kemp wrote:
Any more details on those AT&T terminals?
I could use an AT&T 605 terminal for the 3b2 I hope to someday acquire,
obviously after Seth gets all he needs. :)
Jerry
Any ADM-3As?
On 06/24/16 12:24 PM, Todd Killingsworth wrote:
--
Eric Christopherson
Seth, cont. ... and be careful what you wish for.
I think that he may
have a full 6'x6'x6' pallet of AT&T terminals for you :)
TK
On Fri, Jun 24, 2016 at 1:23 PM, Todd Killingsworth <
killingsworth.todd at gmail.com> wrote:
>Seth - I specifically asked about 3B2 boxes when I saw the AT&T
>terminals. Unfortunately, the guy has already cleared them out of his
>warehouse.
>
>Todd Killingsworth
>
>On Fri, Jun 24, 2016 at 1:18 PM, Seth Morabito <lists at loomcom.com> wrote:
>
>>>I call dibs on any and all AT&T terminals and 3B2 stuff! :^)
>>>
>>>-Seth
>>>
>>>
>>
30 Jun
30 Jun
11:33 a.m.
Sorry if I missed the reply describing these.
What type of terminals were the AT&T terminals?
Thanks,
Jerry
On 06/24/16 01:53 PM, Jerry Kemp wrote:
Any more details on those AT&T terminals?
I could use an AT&T 605 terminal for the 3b2 I hope to someday acquire,
obviously after Seth gets all he needs. :)
Jerry
On 06/24/16 12:24 PM, Todd Killingsworth wrote:
Seth, cont. ... and be careful what you wish
for. I think that he may
have a full 6'x6'x6' pallet of AT&T terminals for you :)
TK
On Fri, Jun 24, 2016 at 1:23 PM, Todd Killingsworth <
killingsworth.todd at gmail.com> wrote:
> Seth - I specifically asked about 3B2 boxes when I saw the AT&T
> terminals. Unfortunately, the guy has already cleared them out of his
> warehouse.
>
> Todd Killingsworth
>
> On Fri, Jun 24, 2016 at 1:18 PM, Seth Morabito <lists at loomcom.com> wrote:
>
>>> I call dibs on any and all AT&T terminals and 3B2 stuff! :^)
>>>
>>> -Seth
>>>
>>>
>> 
26 Jun
26 Jun
1:42 a.m.
Does he really have a palette of AT&T terminals? I'm local in Atlanta
and may move them out if still available.
-Alan
On 2016-06-24 13:24, Todd Killingsworth wrote:
Seth, cont. ... and be careful what you wish for. I
think that he may
have a full 6'x6'x6' pallet of AT&T terminals for you :)
TK
On Fri, Jun 24, 2016 at 1:23 PM, Todd Killingsworth <
killingsworth.todd at gmail.com> wrote:
Seth - I specifically asked about 3B2 boxes when I saw the AT&T
terminals. Unfortunately, the guy has already cleared them out of his
warehouse.
Todd Killingsworth
On Fri, Jun 24, 2016 at 1:18 PM, Seth Morabito <lists at loomcom.com> wrote:
On Jun 24, 2016, at 7:39 AM, Todd Killingsworth < killingsworth.todd at gmail.com>
wrote:
Heh. No, guys - I've not bought the whole building!
I've got the 100+ pictures loaded up for editing, but I still have to
resize them to jpg. No SGI, a few IBM big peripherals, some DEC VAX and Alpha boxes (no
PDP anything), a Sun E3K, and $DEITY's own collection of terminals and keyboards.
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I call dibs on any and all AT&T terminals and 3B2 stuff! :^)
-Seth
24 Jun
24 Jun
11:01 a.m.
Op 24 jun. 2016 4:40 p.m. schreef "Todd Killingsworth" <
killingsworth.todd at gmail.com>:
Heh. No, guys - I've not bought the whole building!
I've got the 100+ pictures loaded up for editing, but I still have to
resize them to jpg. No SGI, a few IBM big peripherals, some DEC VAX and
Alpha boxes (no PDP anything), a Sun E3K, and $DEITY's own collection of
terminals and keyboards.
Terminals from IBM Mainframes and midrange, pallets of DEC terminals, HP
terminals (or monitor/keyboard combos for HP PA-RISC machines??). Also
oddballs like AT&T, Qume, Texas Instruments, WISE, etc.
I'll get pics up somewhere this weekend and share the link
Todd Killingsworth
If there's anything like an IBM 1052, let me know!
Camiel
3414
days inactive
3422
days old
44 comments
26 participants
participants (26)
-
alanï¼ alanlee.org -
alexmcwhirterï¼ triadic.us -
benï¼ bensinclair.com -
bfranchukï¼ jetnet.ab.ca -
cisinï¼ xenosoft.com -
connorkï¼ connorsdomain.com -
echristophersonï¼ gmail.com -
elsonï¼ pico-systems.com -
ethan.dicksï¼ gmail.com -
iamcamielï¼ gmail.com -
ian.primus.ccmpï¼ gmail.com -
jasonï¼ smbfc.net -
jwestï¼ classiccmp.org -
killingsworth.toddï¼ gmail.com -
listsï¼ loomcom.com -
lprovenï¼ gmail.com -
mloewenï¼ cpumagic.scol.pa.us -
nf6xï¼ nf6x.net -
otherï¼ oryx.us -
peteï¼ petelancashire.com -
pontusï¼ Update.UU.SE -
swiftgriggsï¼ gmail.com -
turingï¼ shaw.ca -
useddecï¼ gmail.com -
wdonzelliï¼ gmail.com -
witchyï¼ binarydinosaurs.co.uk