12 Oct
2021
12 Oct
'21
1:10 p.m.
All,
I recently picked up an ICE-85 in-circuit emulator from Jack Rubin (thanks Ian and Connor
for ferrying it back!). I thought that the stuff it came with included a Prompt-80 as a
controller, but it does not: there's an unrelated Prompt-48 board in the boxes. The
ICE-85 came with ISIS control software on 8" diskette. So I guess I'm in the
market for an Intel MDS-800. Good luck, right? :P
Thanks,
Jonathan
12 Oct
12 Oct
1:50 p.m.
Here is an MDS-720. Note the drives inside are Shugart 800 seriers. I
would think the 800's would be Shugart-compatible if not actually Shugart
drives inside.
https://www.vintagecomputer.net/intel/MDS-720/Intel_MDS-720_D1-SN.jpg
On Tue, Oct 12, 2021 at 4:11 PM Jonathan Chapman via cctalk <
cctalk at classiccmp.org> wrote:
All,
I recently picked up an ICE-85 in-circuit emulator from Jack Rubin (thanks
Ian and Connor for ferrying it back!). I thought that the stuff it came
with included a Prompt-80 as a controller, but it does not: there's an
unrelated Prompt-48 board in the boxes. The ICE-85 came with ISIS control
software on 8" diskette. So I guess I'm in the market for an Intel MDS-800.
Good luck, right? :P
Thanks,
Jonathan
1:51 p.m.
and here are detailed pics of the Shugart jumpers
https://www.vintagecomputer.net/intel/MDS-720/
Maybe you could try a set of drives set to be 720's and see if that gets
you going.
BIll
On Tue, Oct 12, 2021 at 4:50 PM Bill Degnan <billdegnan at gmail.com> wrote:
Here is an MDS-720. Note the drives inside are
Shugart 800 seriers. I
would think the 800's would be Shugart-compatible if not actually Shugart
drives inside.
https://www.vintagecomputer.net/intel/MDS-720/Intel_MDS-720_D1-SN.jpg
On Tue, Oct 12, 2021 at 4:11 PM Jonathan Chapman via cctalk <
cctalk at classiccmp.org> wrote:
All,
I recently picked up an ICE-85 in-circuit emulator from Jack Rubin
(thanks Ian and Connor for ferrying it back!). I thought that the stuff it
came with included a Prompt-80 as a controller, but it does not: there's an
unrelated Prompt-48 board in the boxes. The ICE-85 came with ISIS control
software on 8" diskette. So I guess I'm in the market for an Intel MDS-800.
Good luck, right? :P
Thanks,
Jonathan
2:06 p.m.
I have a few Intellec MDS Series II development systems. They can host an ICE-85. I?d
sell you one. They are VERY heavy. I?m in Michigan.
Dave
Sent from my iPhone.
On Oct 12, 2021, at 4:51 PM, Bill Degnan via cctalk
<cctalk at classiccmp.org> wrote:
?and here are detailed pics of the Shugart jumpers
https://www.vintagecomputer.net/intel/MDS-720/
Maybe you could try a set of drives set to be 720's and see if that gets
you going.
BIll
> On Tue, Oct 12, 2021 at 4:50 PM Bill Degnan <billdegnan at gmail.com> wrote:
>
> Here is an MDS-720. Note the drives inside are Shugart 800 seriers. I
> would think the 800's would be Shugart-compatible if not actually Shugart
> drives inside.
> https://www.vintagecomputer.net/intel/MDS-720/Intel_MDS-720_D1-SN.jpg
>
> On Tue, Oct 12, 2021 at 4:11 PM Jonathan Chapman via cctalk <
> cctalk at classiccmp.org> wrote:
>
>> All,
>>
>> I recently picked up an ICE-85 in-circuit emulator from Jack Rubin
>> (thanks Ian and Connor for ferrying it back!). I thought that the stuff it
>> came with included a Prompt-80 as a controller, but it does not: there's an
>> unrelated Prompt-48 board in the boxes. The ICE-85 came with ISIS control
>> software on 8" diskette. So I guess I'm in the market for an Intel
MDS-800.
>> Good luck, right? :P
>>
>> Thanks,
>> Jonathan
>>
>
13 Oct
13 Oct
4:30 p.m.
If you only need a single drive and it is single density floppies, you don't need a
MSD-800 and a MSD-720 to run the ICE-85. You can use what we call a Series II. It came
with a small number of multibus slot. As I recall, we used to run ICE-80s and ICE-85 on a
Series II. We may have had the drive boxes as well but I don't recall that much.
Dwight
________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Mich.com via cctalk
<cctalk at classiccmp.org>
Sent: Tuesday, October 12, 2021 2:06 PM
To: Bill Degnan <billdegnan at gmail.com>; General Discussion: On-Topic and
Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: WTB/WTT: Intel MDS-800
I have a few Intellec MDS Series II development systems. They can host an ICE-85. I?d
sell you one. They are VERY heavy. I?m in Michigan.
Dave
Sent from my iPhone.
On Oct 12, 2021, at 4:51 PM, Bill Degnan via cctalk
<cctalk at classiccmp.org> wrote:
?and here are detailed pics of the Shugart jumpers
https://www.vintagecomputer.net/intel/MDS-720/
Maybe you could try a set of drives set to be 720's and see if that gets
you going.
BIll
> On Tue, Oct 12, 2021 at 4:50 PM Bill Degnan <billdegnan at gmail.com> wrote:
>
> Here is an MDS-720. Note the drives inside are Shugart 800 seriers. I
> would think the 800's would be Shugart-compatible if not actually Shugart
> drives inside.
> https://www.vintagecomputer.net/intel/MDS-720/Intel_MDS-720_D1-SN.jpg
>
> On Tue, Oct 12, 2021 at 4:11 PM Jonathan Chapman via cctalk <
> cctalk at classiccmp.org> wrote:
>
>> All,
>>
>> I recently picked up an ICE-85 in-circuit emulator from Jack Rubin
>> (thanks Ian and Connor for ferrying it back!). I thought that the stuff it
>> came with included a Prompt-80 as a controller, but it does not: there's an
>> unrelated Prompt-48 board in the boxes. The ICE-85 came with ISIS control
>> software on 8" diskette. So I guess I'm in the market for an Intel
MDS-800.
>> Good luck, right? :P
>>
>> Thanks,
>> Jonathan
>>
>
4:32 p.m.
Oops, I didn't see Dave's post yet.
Dwight
________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of dwight via cctalk
<cctalk at classiccmp.org>
Sent: Wednesday, October 13, 2021 4:30 PM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: WTB/WTT: Intel MDS-800
If you only need a single drive and it is single density floppies, you don't need a
MSD-800 and a MSD-720 to run the ICE-85. You can use what we call a Series II. It came
with a small number of multibus slot. As I recall, we used to run ICE-80s and ICE-85 on a
Series II. We may have had the drive boxes as well but I don't recall that much.
Dwight
________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Mich.com via cctalk
<cctalk at classiccmp.org>
Sent: Tuesday, October 12, 2021 2:06 PM
To: Bill Degnan <billdegnan at gmail.com>; General Discussion: On-Topic and
Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: WTB/WTT: Intel MDS-800
I have a few Intellec MDS Series II development systems. They can host an ICE-85. I?d
sell you one. They are VERY heavy. I?m in Michigan.
Dave
Sent from my iPhone.
On Oct 12, 2021, at 4:51 PM, Bill Degnan via cctalk
<cctalk at classiccmp.org> wrote:
?and here are detailed pics of the Shugart jumpers
https://www.vintagecomputer.net/intel/MDS-720/
Maybe you could try a set of drives set to be 720's and see if that gets
you going.
BIll
> On Tue, Oct 12, 2021 at 4:50 PM Bill Degnan <billdegnan at gmail.com> wrote:
>
> Here is an MDS-720. Note the drives inside are Shugart 800 seriers. I
> would think the 800's would be Shugart-compatible if not actually Shugart
> drives inside.
> https://www.vintagecomputer.net/intel/MDS-720/Intel_MDS-720_D1-SN.jpg
>
> On Tue, Oct 12, 2021 at 4:11 PM Jonathan Chapman via cctalk <
> cctalk at classiccmp.org> wrote:
>
>> All,
>>
>> I recently picked up an ICE-85 in-circuit emulator from Jack Rubin
>> (thanks Ian and Connor for ferrying it back!). I thought that the stuff it
>> came with included a Prompt-80 as a controller, but it does not: there's an
>> unrelated Prompt-48 board in the boxes. The ICE-85 came with ISIS control
>> software on 8" diskette. So I guess I'm in the market for an Intel
MDS-800.
>> Good luck, right? :P
>>
>> Thanks,
>> Jonathan
>>
>
1118
days inactive
1119
days old
5 comments
4 participants
participants (4)
-
billdegnan＠gmail.com -
dkelvey＠hotmail.com -
dmabry＠mich.com -
lists＠glitchwrks.com