2 Apr
2009
2 Apr
'09
5:56 p.m.
Hi there.
I'm currently using "nose pickers" (a friend at work related that
pleasant name) aka XKM grabbers
(http://us.st12.yimg.com/us.st.yimg.com/I/webtronics_2042_10920298) to
attach my low-cost pc-based logic analyzer to some old DIP chips.
They are pretty nice but when you start using a bunch in a row, they can
get pretty cumbersome.
I'm looking for DIP IC test clips for both 40-pin and 48-pin chips.
40-pin doesn't seem too hard to come by, 48-pin seems harder.
Here's a picture of what I'm basically looking for:
http://www.ap-products.com/images/tc02.gif
They clip on the already socketed IC and provide square male header pins
on the top of the clip to attach.
These are for personal use, and I don't want to spend $100 on clips.
Anyone have a line on cheap clips or happen to have any around you want
to get rid of?
Thanks
Keith
P.S. I can find plenty of online datasheets from various manufacturers
but trying to find a stocking reseller that will sell them onesy twosy
to hobbyists is harder.
3 Apr
3 Apr
12:03 a.m.
These are for personal use, and I don't want to
spend $100 on clips.
Anyone have a line on cheap clips or happen to have any around you want
to get rid of?
Thanks
Keith
P.S. I can find plenty of online datasheets from various manufacturers
but trying to find a stocking reseller that will sell them onesy twosy
to hobbyists is harder.
I have some of these (that I'm not looking to get rid of :-) and thought I'd
remembered buying them from either Jameco or JDR but can't seem to find 'em
in their web sites, for some reason... :-(
I guess the prevalence of surface-mount has made them a less popular item
these days?
--
Member of the toughest, meanest, deadliest, most unrelenting -- and
ablest -- form of life in this section of space, a critter that can
be killed but can't be tamed. --Robert A. Heinlein, "The Puppet Masters"
-
Information is more dangerous than cannon to a society ruled by lies. --James
M Dakin
8:12 a.m.
Roy J. Tellason wrote:
I have some of these (that I'm not looking to get
rid of :-) and thought I'd
remembered buying them from either Jameco or JDR but can't seem to find 'em
in their web sites, for some reason... :-(
I guess the prevalence of surface-mount has made them a less popular item
these days?
Yeah -- that is what I was thinking too. It's not that they are
completely unavailable, mind you, but the ones I've found are gold
plated ones for $50 a piece. Too rich for my blood --- and overkill
given the application.
Thanks
Keith
9:49 a.m.
On Fri, Apr 3, 2009 at 5:12 AM, Keith <keithvz at verizon.net> wrote:
Yeah -- that is what I was thinking too. ?It's not that they are completely
unavailable, mind you, but the ones I've found are gold plated ones for $50
a piece. ?Too rich for my blood --- and overkill given the application.
Search Mouser.com for 383-R40
Kobiconn IC Test Clips 40 PIN DIP 1: $16.33 , 5: $14.70
I wonder if the size of the 383-R24 is such that you could use two of
them end to end to fit on a 48-pin DIP.
Kobiconn IC Test Clips 24 PIN DIP 1: $11.11, 5: $10.00
3M 923690-48 Test Clips 48- Pin .5/.6 Wide Alloy 1: $40.70
9:54 p.m.
On Friday 03 April 2009 08:12:02 am Keith wrote:
Roy J. Tellason wrote:
Yeah, that'd definitely be a bit more than I'd want to spend too...
I'm not even sure what sizes I have offhand. I think I got a 14-pin one
first, a cheap one I bought someplace in NYC, I think, and I figured I
could move that a pin if I needed to check a 16-pin part. I'm not sure if I
carried that same thinking over on the bigger ones offhand, but I probably
oughta look and see just what the heck I've got.
I haven't used 'em anywhere near as much as I thought I might, either, but
then I haven't even fired my scope up in ages now, another thing I oughta
fix pretty soon, too. :-)
--
Member of the toughest, meanest, deadliest, most unrelenting -- and
ablest -- form of life in this section of space, a critter that can
be killed but can't be tamed. --Robert A. Heinlein, "The Puppet Masters"
-
Information is more dangerous than cannon to a society ruled by lies. --James
M Dakin
I have some of these (that I'm not looking to
get rid of :-) and thought
I'd remembered buying them from either Jameco or JDR but can't seem to
find 'em in their web sites, for some reason... :-(
I guess the prevalence of surface-mount has made them a less popular item
these days?
Yeah -- that is what I was thinking too. It's not that they are
completely unavailable, mind you, but the ones I've found are gold
plated ones for $50 a piece. Too rich for my blood --- and overkill
given the application.
Thanks
Keith
5570
days inactive
5572
days old
4 comments
3 participants
participants (3)
-
glen.slick＠gmail.com -
keithvz＠verizon.net -
rtellason＠verizon.net