17 Oct
2019
17 Oct
'19
1:51 p.m.
A bit off topic, but I figure a number of us are interested in this older "social
media" mechanism.
https://arstechnica.com/information-technology/2019/10/yahoo-is-deleting-al…
So if you subscribe to any Yahoo groups, or value any of that content, be sure to archive
it before your friendly telco sends ALL of it to the bit bucket.
paul
17 Oct
17 Oct
2:20 p.m.
Thanks for the link!
Groups are already jumping ship. The popular destination seems to be groups.io, which has
some good features.
Zane
Sent from my iPod
On Oct 17, 2019, at 1:51 PM, Paul Koning via cctalk
<cctalk at classiccmp.org> wrote:
A bit off topic, but I figure a number of us are interested in this older "social
media" mechanism.
https://arstechnica.com/information-technology/2019/10/yahoo-is-deleting-al…
So if you subscribe to any Yahoo groups, or value any of that content, be sure to archive
it before your friendly telco sends ALL of it to the bit bucket.
paul
3:32 p.m.
So if you subscribe to any Yahoo groups, or value any
of that content, be
sure to archive it before your friendly telco sends ALL of it to the bit
bucket.
Yeah, it sucks. The Tomy Tutor users group has been there for years, and I
guess we'll jump over to groups.io. I managed to archive everything last
night.
--
------------------------------------ personal: http://www.cameronkaiser.com/ --
Cameron Kaiser * Floodgap Systems * www.floodgap.com * ckaiser at floodgap.com
-- No good deed goes unpunished. -- Clare Boothe Luce -------------------------
6:08 p.m.
Cameron said
Yeah, it sucks. The Tomy Tutor users group has been
there for years, and I
guess we'll jump over to groups.io. I managed to archive everything last
night.
What's your strategy for archiving material off YahooGroups? Their Files and
Photo (photostreams) sections are so heavily Javascript-encrusted that it's
not at all easy to bulk archive from them. I tried a few tools (httrack, wget,
curl) with no valid results, but I only used some basic settings.
6:13 p.m.
On Fri, 18 Oct 2019, Steve Malikoff via cctalk wrote:
What's your strategy for archiving material off
YahooGroups? Their Files and
Photo (photostreams) sections are so heavily Javascript-encrusted that it's
not at all easy to bulk archive from them. I tried a few tools (httrack, wget,
curl) with no valid results, but I only used some basic settings.
https://www.archiveteam.org/index.php?title=Yahoo!_Groups
has some of the needed information.
And, there are some Python scripts for slurping up the messages.
6:37 p.m.
On 10/17/2019 6:08 PM, Steve Malikoff via cctalk wrote:
Cameron said
There is a now
obsolete plugin for firefox called "downloadthemall" that
sucks the files down.? I saw elsewhere in the thread there may be
scripts to scrape messages, will look at that.? Downloadthemall sees the
string of crap after the file name, and apparently it comes down with
the correct file contents and file name.? I just downloaded it one
directory at a time, because DTA doesn't do a recursion in any way.
I have an old set of perl code which I used in 2016 to grab several
groups in their entirety, and now need to get from there forward.
The thing that happened pre-Verizon was they rolled out a mangling of
the groups code called "neo" which still remains in the URL. They killed
the original code most tools could scrape groups from by turning off all
but the neo type site.
Grabyahoogroups.pl is the code FWIW that did work.? I'm glad someone
found something if it works with the messages.
thanks
Jim
Yeah, it sucks. The Tomy Tutor users group has
been there for years, and I
guess we'll jump over to groups.io. I managed to archive everything last
night.
What's your strategy for archiving material off YahooGroups? Their
Files and
Photo (photostreams) sections are so heavily Javascript-encrusted that it's
not at all easy to bulk archive from them. I tried a few tools (httrack, wget,
curl) with no valid results, but I only used some basic settings.
6:52 p.m.
Yeah, it
sucks. The Tomy Tutor users group has been there for years, and I
guess we'll jump over to groups.io. I managed to archive everything last
night.
What's your strategy for archiving material off YahooGroups? Their Files and
Photo (photostreams) sections are so heavily Javascript-encrusted that it's
not at all easy to bulk archive from them. I tried a few tools (httrack, wget,
curl) with no valid results, but I only used some basic settings.
23 Oct
23 Oct
5:44 p.m.
On 10/17/2019 6:52 PM, Cameron Kaiser via cctalk wrote:
For the
messages, I used
https://github.com/andrewferguson/YahooGroups-Archiver
Unfortunately, the (rather inadequate) Y!G API for files makes it difficult
to iterate over files in a directory tree. I ended up manually downloading
them, since it was only about 30 files and not worth ginning up something
to scrape them. Some people have used
https://github.com/csaftoiu/yahoo-groups-backup I didn't get that to work.?
Has anyone here got suggestions? Contact off
list.? It is getting errors, and I spent about an hour trying to figure
it out.
every issue was a bug in either Python that was unresolved, or the tools
they were using, not errors in the tool, so I'm not really interested in
a lot more debugging.
I suspect it ran at some point, maybe I've got the wrong versions of
some sort.
thanks
Jim
Yeah, it sucks. The Tomy Tutor users group has been
there for years, and I
guess we'll jump over to groups.io. I managed to archive everything last
night.
What's your strategy for archiving material off YahooGroups? Their
Files and
Photo (photostreams) sections are so heavily Javascript-encrusted that it's
not at all easy to bulk archive from them. I tried a few tools (httrack, wget,
curl) with no valid results, but I only used some basic settings. to get everything but it needs a MongoDB instance
which seemed kind of
overkill for a one-time dump.
5:58 p.m.
On Wed, 23 Oct 2019, jim stephens via cctalk wrote:
I suspect it ran at some point, maybe I've got the
wrong versions of some
sort.
I have no special knowledge. this is just uninformed speculation, . . .
If it is old enough, could it be that the changes for "NEO" broke it?
(possibly deliberately, since Yahoo had no desire for anybody to access
below the user level)
6:26 p.m.
On 10/23/19 5:44 PM, jim stephens via cctalk wrote:
I couldn't make it work either.
This is what archiveteam knows currently
https://www.archiveteam.org/index.php?title=Yahoo!_Groups
????https://github.com/csaftoiu/yahoo-groups-backup
I didn't get that to work.?
Has anyone here got suggestions? Contact off list.? It is getting errors, and I spent
about
an hour trying to figure it out.
25 Oct
25 Oct
7:43 p.m.
New subject: 8 inch floppies
Hidden behind a NYTimes paywall, . . .
news yesterday that the 8 inch drive nuclear weapions system has now been
updated.
Don't you feel safer that it is now on the interwebs, and doing windows
updates every day?
"Update Complete: U.S. Nuclear Weapons No Longer Need Floppy Disks
The Defense Department has transitioned away from a 1970s-era nuclear
command and control system that relied on eight-inch floppy disks. The
modernizing effort was quietly completed in June." -NYTimes
https://nl.nytimes.com/f/newsletter/v4PmZDi7MtjL4dBgHkrNHg~~/AAAAAQA~/RgRfl
Uz3P0T_aHR0cHM6Ly93d3cubnl0aW1lcy5jb20vMjAxOS8xMC8yNC91cy9udWNsZWFyLXdlYXBv
bnMtZmxvcHB5LWRpc2tzLmh0bWw_dGU9MSZubD1tb3JuaW5nLWJyaWVmaW5nJmVtYz1lZGl0X05
OX3BfMjAxOTEwMjUmc2VjdGlvbj13aGF0RWxzZT9jYW1wYWlnbl9pZD05Jmluc3RhbmNlX2lkPT
EzMzcwJnNlZ21lbnRfaWQ9MTgyMzEmdXNlcl9pZD1hMjcxOTVlODNkNzYwZTRiZjg3YmM1YWUyN
zliNTY5YyZyZWdpX2lkPTc5MjgwMjM1aW9uPXdoYXRFbHNlVwNueXRCCgAk98eyXe9q5TlSEm5h
bmN5d2ViYjFAYW9sLmNvbVgEAAAAAA~~
26 Oct
26 Oct
8:28 a.m.
New subject: 8 inch floppies
At 09:43 PM 10/25/2019, you wrote:
Hidden behind a NYTimes paywall, . . .
news yesterday that the 8 inch drive nuclear weapions system has now been updated.
And what media or method did they upgrade to? Top secret?
Here's a different version of the story:
<https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/>https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/
- John
12:43 p.m.
New subject: 8 inch floppies
The far more interesting question is just how many nuclear devices were
"missing" in the recount....
CZ
On 10/26/2019 11:28 AM, John Foust via cctalk wrote:
At 09:43 PM 10/25/2019, you wrote:
Hidden behind a NYTimes paywall, . . .
news yesterday that the 8 inch drive nuclear weapions system has now been updated.
And what media or method did they upgrade to? Top secret?
Here's a different version of the story:
<https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/>https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/
- John
2:35 p.m.
New subject: 8 inch floppies
My question is where can I get the disk drives?
On 10/26/2019 3:43 PM, Chris Zach via cctalk wrote:
The far more interesting question is just how many
nuclear devices
were "missing" in the recount....
CZ
On 10/26/2019 11:28 AM, John Foust via cctalk wrote:
> At 09:43 PM 10/25/2019, you wrote:
>> Hidden behind a NYTimes paywall, . . .
>> news yesterday that the 8 inch drive nuclear weapions system has now
>> been updated.
>
> And what media or method did they upgrade to?? Top secret?
>
> Here's a different version of the story:
>
>
<https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/>https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/
>
>
> - John
>
>
--
Bob Grabau
http://www.astrohbg.org
http://www.cherrysprings.org
Our Star Party: June 14-17, 2018 Cherry Springs State Park, PA
2:42 p.m.
New subject: 8 inch floppies
> Hidden behind a NYTimes paywall, . . .
> news yesterday that the 8 inch drive nuclear weapions system has now been updated.
On Sat, 26 Oct 2019, John Foust via cctalk wrote:
And what media or method did they upgrade to? Top
secret?
Here's a different version of the story:
<https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/>https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/
Thanks for the URL
Amusing that requiring repair technicians having ability to "solder metal"
was one of the major problems.
The USUAL progression from 8" floppies was to 35 track (later 40 track)
single sided (later double) FM single density (later MFM) 48tpi (later
96tpi) 5.25".
But, an easier conversion would be straight to "1.2M", which would need
few hardware changes other than a custom cable.
(In fact, the first Mitsubishi 1.2M drive that I got had a 50 pin
connector; later 4854s had a 34 pin connector)
But, why not cards or paper tape?
Or, if they want to expand speed and capacity, ST506, or even ST412.
They could go to thumb drives, such as Stuxnet
Or, was the main goal to give it a publicly accessible IP address?
("War Games" is playing on MPLEX right now)
Besides convenient recreational Facebook access for staff technicians, why
is web browsing implemented on MRI control computers or on WOPR?
BTW, the superceded drives and media will remain "classified" until they
crumble, and our surplus channels will not get a sudden major influx of
available media.
2:52 p.m.
New subject: 8 inch floppies
In all my years of electronics troubleshooting, I have never spent hours
under a microscope :-)? OK, it was easier using the RTL of the Univac
418, but even today the parts are big enough to see!
On 26/10/2019 17:42, Fred Cisin via cctalk wrote:
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it
will pass across the public Internet, easily readable by any number of system
administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this message
> Hidden
behind a NYTimes paywall, . . .
> news yesterday that the 8 inch drive nuclear weapions system has now
> been updated.
On Sat, 26 Oct 2019, John Foust via cctalk wrote:
And what media or method did they upgrade to??
Top secret?
Here's a different version of the story:
<https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/>https://www.c4isrnet.com/air/2019/10/17/the-us-nuclear-forces-dr-strangelove-era-messaging-system-finally-got-rid-of-its-floppy-disks/
Thanks for the URL
Amusing that requiring repair technicians having ability to "solder
metal" was one of the major problems.
The USUAL progression from 8" floppies was to 35 track (later 40
track) single sided (later double) FM single density (later MFM) 48tpi
(later 96tpi) 5.25".
But, an easier conversion would be straight to "1.2M", which would
need few hardware changes other than a custom cable.
(In fact, the first Mitsubishi 1.2M drive that I got had a 50 pin
connector; later 4854s had a 34 pin connector)
But, why not cards or paper tape?
Or, if they want to expand speed and capacity, ST506, or even ST412.
They could go to thumb drives, such as Stuxnet
Or, was the main goal to give it a publicly accessible IP address?
("War Games" is playing on MPLEX right now)
Besides convenient recreational Facebook access for staff technicians,
why is web browsing implemented on MRI control computers or on WOPR?
BTW, the superceded drives and media will remain "classified" until
they crumble, and our surplus channels will not get a sudden major
influx of available media.
3:05 p.m.
New subject: 8 inch floppies
On Sat, 26 Oct 2019, Nigel Johnson via cctalk wrote:
In all my years of electronics troubleshooting, I have
never spent hours
under a microscope :-)? OK, it was easier using the RTL of the Univac 418,
but even today the parts are big enough to see!
Do they do a lot of decapping and repairing ICs? :-)
Is it becoming that hard to get a working 8080 and support chips?
3:31 p.m.
New subject: 8 inch floppies
Besides convenient recreational Facebook access >for
staff technicians, why >is web browsing implemented on MRI control >computers or on
WOPR?Because most apps used in the hospital (e.g. CERNER, EPIC, MedNet, teletracking,
scheduling, etc.) Sre implemented as web apps many served from offsite servers. Welcome to
the 60s folks.-Ali
23 Oct
23 Oct
6:50 p.m.
Jim said
On 10/17/2019 6:52 PM, Cameron Kaiser via cctalk
wrote:
For the
messages, I used
https://github.com/andrewferguson/YahooGroups-Archiver
Unfortunately, the (rather inadequate) Y!G API for files makes it difficult
to iterate over files in a directory tree. I ended up manually downloading
them, since it was only about 30 files and not worth ginning up something
to scrape them. Some people have used
https://github.com/csaftoiu/yahoo-groups-backup I didn't get that to work.?
Has anyone here got suggestions? Contact off
list.? It is getting errors, and I spent about an hour trying to figure
it out.
every issue was a bug in either Python that was unresolved, or the tools
they were using, not errors in the tool, so I'm not really interested in
a lot more debugging.
I suspect it ran at some point, maybe I've got the wrong versions of
some sort.
thanks
Jim
> to get everything but it needs a MongoDB instance which seemed kind of
> overkill for a one-time dump.
I set it up with python 3.7.3, pip installed the required modules such as
Selenium, installed geckodriver for Firefox (but I don't run Firefox on this
machine, I use a popular fork) and it emitted an error that referes to Selenium
not being the correct match to Firefox.
I have other things to do so that's where I left it for now, will try it out
again sometime soon with an earlier actual Firefox.
Steve.
Yeah, it sucks. The Tomy Tutor users group has been
there for years, and I
guess we'll jump over to groups.io. I managed to archive everything last
night.
What's your strategy for archiving material off YahooGroups? Their
Files and
Photo (photostreams) sections are so heavily Javascript-encrusted that it's
not at all easy to bulk archive from them. I tried a few tools (httrack, wget,
curl) with no valid results, but I only used some basic settings. 
24 Oct
24 Oct
12:51 a.m.
have been reasonably successful, after making a few mods, in backing up Yahoo groups using
a clone of "Yahoo Group Archiver" which broadly works (but see below) and
doesn't need any scraping tools.
I made a few tweaks concentrating on speed rather than documenting the code and the
current mess is here:-
https://1drv.ms/u/s!Ag4BJfE5B3onleMG29vMs5czmPcoTw?e=TrqawF
The script yahoo.py is supposed back up things to files. I couldn't get use the
user/password login part to work, but noted scripts also have support for putting the
cookies in the command line.
So I downloaded cookie manager for Firefox, logged into Yahoo and added code to set the
values at the top of the code. The result is "yahoo1.py" Its pretty obvious
which cookies are needed.
I found this fails on unnamed photo albums. I also found file download flaky. So Yahoo2
will fix photo albums with duff names and skip downloading any existing files.
This leaves one bug. If a download fails the script may leave an empty file. If you want
to restart that download you need to remove it before restarting the download.
Sometimes Yahoo barfs at a file because updated av/malware scanners mark its as bad. E.g.
archives which contain "netcat" In this case leave the partial download in place
and allow the script to skip
We also don't get file descriptions.
I am running the scripts on Windows/10 on Python 3.7.5 on Windows/10 and use
"py" to run the scripts
When installing the required "requests" package (see the readme.md) I found I
had to enter the full path to pip (Its it the scripts folder)
I am happy to answer any questions but note I am in the UK (that is East Pondia not the
University of Kentucky) so please allow for my time zone.
Dave
G4UGM
P.S. I now hate python....
PPS I also now hate Yahoo.
-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Steve Malikoff via
cctalk
Sent: 24 October 2019 02:51
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: Yahoo Groups going away
Jim said
On 10/17/2019 6:52 PM, Cameron Kaiser via cctalk
wrote:
I didn't get that to work.
Has anyone here got suggestions? Contact
off list. It is getting errors, and I spent about an hour trying to
figure it out.
every issue was a bug in either Python that was unresolved, or the
tools they were using, not errors in the tool, so I'm not really
interested in a lot more debugging.
I suspect it ran at some point, maybe I've got the wrong versions of
some sort.
thanks
Jim
> to get everything but it needs a MongoDB instance which seemed kind
> of overkill for a one-time dump.
I set it up with python 3.7.3, pip installed the required modules such as
Selenium, installed geckodriver for Firefox (but I don't run Firefox on this
machine, I use a popular fork) and it emitted an error that referes to Selenium
not being the correct match to Firefox.
I have other things to do so that's where I left it for now, will try it out again
sometime soon with an earlier actual Firefox.
Steve. > Yeah,
it sucks. The Tomy Tutor users group has been there for
> years, and I guess we'll jump over to groups.io. I managed to
> archive everything last night.
What's your strategy for archiving material off YahooGroups? Their
Files and Photo (photostreams) sections are so heavily
Javascript-encrusted that it's not at all easy to bulk archive from
them. I tried a few tools (httrack, wget,
curl) with no valid results, but I only used some basic settings.
For the
messages, I used
https://github.com/andrewferguson/YahooGroups-Archiver
Unfortunately, the (rather inadequate) Y!G API for files makes it
difficult to iterate over files in a directory tree. I ended up
manually downloading them, since it was only about 30 files and not
worth ginning up something to scrape them. Some people have used
https://github.com/csaftoiu/yahoo-groups-backup
17 Oct
17 Oct
6:12 p.m.
On Oct 17, 2019, at 3:32 PM, Cameron Kaiser via cctalk
<cctalk at classiccmp.org> wrote:
The 3D photography group I?m on just moved to groups.io this afternoon. When I went and
looked just now, it looks like all the files moved as well. Other groups I?m on had
already moved.
Zane
So if you subscribe to any Yahoo groups, or value
any of that content, be
sure to archive it before your friendly telco sends ALL of it to the bit
bucket.
Yeah, it sucks. The Tomy Tutor users group has been there for years, and I
guess we'll jump over to groups.io. I managed to archive everything last
night.
6:14 p.m.
Yes, other groups i belong to that moved have previously said that
groups.io has a method of pulling groups over. Pull rather than push
seems to be the way to go. Best to attack it from the groups.io end
after setting up the new group there.
On 17/10/2019 21:12, Zane Healy via cctalk wrote:
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it
will pass across the public Internet, easily readable by any number of system
administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this message
On Oct 17,
2019, at 3:32 PM, Cameron Kaiser via cctalk <cctalk at classiccmp.org> wrote:
The 3D photography group I?m on just moved to groups.io this afternoon.
When I went and looked just now, it looks like all the files moved as well. Other groups
I?m on had already moved.
Zane
So if you subscribe to any Yahoo groups, or value
any of that content, be
sure to archive it before your friendly telco sends ALL of it to the bit
bucket.
Yeah, it sucks. The Tomy Tutor users group has been there for years, and
I
guess we'll jump over to groups.io. I managed to archive everything last
night.
6:22 p.m.
On Thu, 17 Oct 2019, Nigel Johnson via cctalk wrote:
Yes, other groups i belong to that moved have
previously said that groups.io
has a method of pulling groups over. Pull rather than push seems to be the
way to go. Best to attack it from the groups.io end after setting up the new
group there.
The guy who runs groups.io is the one who created onelist, which became
e-groups, with got swallowed up by Yahoo!, and then he left.
He knows how to do it. People who have switched over seem happy with it.
BUT, does he have an appropriate level of resources to handle THAT much
traffic?
7:49 p.m.
The guy who runs groups.io is the one who created onelist, which became
e-groups, with got swallowed up by Yahoo!, and then he left.
He knows how to do it. People who have switched over seem happy with
it.
BUT, does he have an appropriate level of resources to handle THAT much
traffic?
I saw a posting about this on one of the groups I am in (XXCopy) and it
seems as if groups.io is not free. At least there was talk of a $110
payment.
-Ali
7:59 p.m.
On 10/17/2019 9:49 PM, Ali via cctalk wrote:
The groups are free as long as you use less than 1GB of storage.? More storage
costs.? Unfortunately, since this past February, you also have to pay in order to have
Groups.IO do the moving of your messages, files and photos.? No freebie for that anymore.
--
John H. Reinhardt
The guy who
runs groups.io is the one who created onelist, which became
e-groups, with got swallowed up by Yahoo!, and then he left.
He knows how to do it. People who have switched over seem happy with
it.
BUT, does he have an appropriate level of resources to handle THAT much
traffic?
I saw a posting about this on one of the groups I am in (XXCopy) and it
seems as if groups.io is not free. At least there was talk of a $110
payment.
-Ali
8:02 p.m.
The groups are free as long as you use less than 1GB
of storage. More
storage costs. Unfortunately, since this past February, you also have
to pay in order to have Groups.IO do the moving of your messages, files
and photos. No freebie for that anymore.
That explains it. BTW: is February when Yahoo first announced the shutdown of Yahoo
Groups? Just wondering....
-Ali
10:05 p.m.
On 10/17/2019 8:02 PM, Ali via cctalk wrote:
In the last couple of days.? It seems to be a bad match to anything
Verizon has any use for, and it's a shame they didn't find a way to spin
it off.? I suspect there is tons of intertwined infrastructure though to
try to cleave it off to a really separate business.
Thanks
Jim
The groups are
free as long as you use less than 1GB of storage. More
storage costs. Unfortunately, since this past February, you also have
to pay in order to have Groups.IO do the moving of your messages, files
and photos. No freebie for that anymore.
That explains it. BTW: is February when
Yahoo first announced the shutdown of Yahoo Groups? Just wondering....
-Ali
8:12 p.m.
On Thu, 17 Oct 2019, Ali wrote:
I saw a posting about this on one of the groups I am
in (XXCopy) and it
seems as if groups.io is not free. At least there was talk of a $110
payment.
Groups.io has a free level. But, if you subscribe to "premium" for one
year ($110), then they will do the transfer for you.
1655
days inactive
1664
days old
27 comments
14 participants
participants (14)
-
aek＠bitsavers.org -
cctalk＠ibm51xx.net -
cisin＠xenosoft.com -
cz＠alembic.crystel.com -
dave.g4ugm＠gmail.com -
healyzh＠avanthar.com -
jfoust＠threedee.com -
johnhreinhardt＠thereinhardts.org -
jwsmail＠jwsss.com -
nw.johnson＠ieee.org -
paulkoning＠comcast.net -
ragrabau＠gmail.com -
spectre＠floodgap.com -
steven＠malikoff.com