I tried to run ADVENT on my 6809-based PDP8/e simulation, but
it did not work. I asked Dough and he told me that ADVENT
stores its files using the *physical address* on the disk.
So, if you copy the files and they end up on a different
location on your target disk, ADVENT is not able to read them.
This is from memory, and I could be wrong ...
- Henk, PA8PDP.
-----Original Message-----
From: cctalk-bounces at
classiccmp.org
[mailto:cctalk-bounces at
classiccmp.org] On Behalf Of
charlesmorris at
direcway.com
Sent: donderdag 1 december 2005 22:11
To: cctalk at
classiccmp.org
Subject: How to load ADVENT on PDP-8?
I have the ADVENT files for PDP-8 (from the diagpack2.RK05
image) but it won't run under SIMH (simulator halts on error).
Does anyone have the load/run instructions?
thanks
Charles
This message and attachment(s) are intended solely for the use of the addressee and may
contain information that is privileged, confidential or otherwise exempt from disclosure
under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this
message to the intended recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by
telephone and with a "reply" message.
Thank you for your cooperation.