There ought to be enough old CRAY hardware out there, from which you can
extract the circuits but not the plumbing and keep your PC and stuff in
liquefied N2. That might help a little, and it will be cleaner, too. In
fact, you ought to get it to run faster than the CRAY. I wonder if the CRAY
will run as many instructions between crashes as the PC . . .
Dick
-----Original Message-----
From: Aaron Christopher Finney <af-list(a)is1.wfi-inc.com>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Wednesday, November 17, 1999 2:45 PM
Subject: Re: E.U.N.U.C.H.
Depending on what you jack the bus speed up to, you
want to make sure that
the cache is cooled as well as your video processor. I have a 3dfx board
that I needed to put an aftermarket fan/heatsink on because it ran so hot.
The nice thing about the high-pressure gas setup I mentioned earlier is
that you can direct the vented gas on hot spots to help keep them cool...
Aaron
On Wed, 17 Nov 1999, Arfon Gryffydd wrote:
Besides the CPU, what other chips need to be
chilled to over-clock? The
Cache?
----------------------------------------
Tired of Micro$oft???
Move up to a REAL OS...
######__ __ ____ __ __ _ __ #
#####/ / / / / __ | / / / / | |/ /##
####/ / / / / / / / / / / / | /###
###/ /__ / / / / / / / /_/ / / |####
##/____/ /_/ /_/ /_/ /_____/ /_/|_|####
# ######
("LINUX" for those of you
without fixed-width fonts)
----------------------------------------
Be a Slacker!
http://www.slackware.com
Slackware Mailing List:
http://www.digitalslackers.net/linux/list.html