4 Apr
2001
4 Apr
'01
4:17 p.m.
Well here it is......
I hooked the Vax up to my IBM Model 80 with Tera Term. Anybody have any
other favorite terminal programs?
What should I be able to see from the below info?
>>show mem
Memory 0: 00000000 to 003FFFFF,
4MB, 0 bad pages
Memory 1: 00400000 to 00BFFFFF, 8MB, 0 bad pages
Memory 2: 00C00000 to 01BFFFFF, 16MB, 0 bad pages
Memory 3: 01C00000 to 02BFFFFF, 16MB, 0 bad pages
Total of 44MB, 0 bad pages, 118 reserved pages
>>show dev
DSSI Node 0 (TSD4A)
-DIA0 (RF71)
DSSI Node 1 (R5ARYC)
-DIA23 (RF35)
DSSI Node 2 (R5DKVC)
-DIA20 (RF35)
DSSI Node 7 (*)
UQSSP Tape Controller 0 (774500)
-MUA0 (TK70)
Ethernet Adapter
-ESA0 (08-00-2B-12-41-19)
>>show qbus
Scan of Qbus I/O Space
-20000120 (760440) = 0080 (300) DHQ11/DHV11/CXA16/CXB16/CXY08
-20000122 (760442) = F081
-20000124 (760444) = DD18
-20000126 (760446) = 0140
-20000128 (760450) = 0000
-2000012A (760452) = 0000
-2000012C (760454) = 8000
-2000012E (760456) = 0000
-20001940 (774500) = 0000 (260) TQK50/TQK70/TU81E/RV20/KFQSA-TAPE
-20001942 (774502) = 0BC0
-20001F40 (777500) = 0020 (004) IPCR
Scan of Qbus Memory Space
>>help
Following is a brief summary of all
the commands supported by the
console:
UPPERCASE denotes a keyword that you must type in
| denotes an OR condition
[] denotes optional parameters
<> denotes a field that must be filled in
with a syntactically correct value
Valid qualifiers:
/B /W /L /Q /INSTRUCTION
/G /I /V /P /M
/STEP: /N: /NOT
/WRONG /U
Valid commands:
DEPOSIT [<qualifiers>] <address> [<datum> [<datum>]]
EXAMINE [<qualifiers>] [<address>]
MOVE [<qualifiers>] <address> <address>
SEARCH [<qualifiers>] <address> <pattern> [<mask>]
SET BFLG <boot_flags>
SET BOOT <boot_device>[:]
SET HOST/DUP/DSSI <node_number> [<task>]
SET HOST/DUP/UQSSP </DISK | /TAPE> <controller_number> [<task>]
SET HOST/DUP/UQSSP <physical_CSR_address> [<task>]
SET HOST/MAINTENANCE/UQSSP/SERVICE <controller_number>
SET HOST/MAINTENANCE/UQSSP <physical_CSR_address>
SET LANGUAGE <language_number>
SHOW BFLG
SHOW BOOT
SHOW DEVICE
SHOW DSSI
SHOW ETHERNET
SHOW LANGUAGE
SHOW MEMORY [/FULL]
SHOW QBUS
SHOW RLV12
SHOW UQSSP
SHOW VERSION
HALT
INITIALIZE
UNJAM
CONTINUE
START <address>
REPEAT <command>
X <address> <count>
FIND [/MEMORY | /RPB]
TEST [<test_code> [<parameters>]]
BOOT [/R5:<boot_flags> | /<boot_flags>] [<boot_device>[:]]
NEXT [count]
CONFIGURE
HELP
>>boot
No default boot device has been
specified.
Available devices.
-DIA0 (RF71)
-DIA23 (RF35)
-DIA20 (RF35)
-MUA0 (TK70)
-ESA0 (08-00-2B-12-41-19)
Device? [ESA0]: dia0
(BOOT/R5:0 DIA0)
2..
-TSD4A$DIA0
1..0..
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
OpenVMS (TM) VAX Version V6.2 Major version id = 1 Minor version
id = 0
%DECnet-I-LOADED, network base image loaded, version = 05.08.00
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM)
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 04-APR-2001
%SYSINIT, primary PAGEFILE.SYS not found; system initialization
continuing
$! Copyright (c) 1995 Digital Equipment Corporation. All rights
reserved.
%STDRV-I-STARTUP, OpenVMS startup begun at 4-APR-2001 00:02:05.12
%DCL-W-UNDSYM, undefined symbol - check validity and spelling
\B$\
>> Starting TCPIP ... <<<
%MOUNT-I-MOUNTED, USER mounted on _$1$DIA20: (R5DKVC)
%MOUNT-I-REBUILD, volume was improperly dismounted; rebuild in progress
%MOUNT-I-MOUNTED, USER2 mounted on _$1$DIA23: (R5ARYC)
%MOUNT-I-REBUILD, volume was improperly dismounted; rebuild in progress
%DCL-S-SPAWNED, process SYSTEM_1 spawned
%SET-I-NEWAUDSRV, identification of new audit server process is 0000010A
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:24.51 %%%%%%%%%%%
Operator _ALERTN$OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:25.13 %%%%%%%%%%%
Operator status for operator _ALERTN$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER,
SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9,
OPER10,
OPER11, OPER12
%LICENSE-W-TERM, UNICM 99302-323 License has terminated
%SYSTEM-W-PROXYCONVERT, old-format proxy database needs to be converted
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:38.55 %%%%%%%%%%%
Failed logfile operation on file _ALERTN$OPA0:
SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:39.15 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:39.16 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
%LICENSE-E-TERM, UNICM 99302-323 License has terminated
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:39.16 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
%QMAN-W-CRITCLSPACE, free more space on _$1$DIA0 - allocated only 20% of
520 blo
cks needed for full journal file
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:39.17 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:40.21 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
%QMAN-E-OPENERR, error opening
$1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]SYS$QUEUE_MANAGE
R.QMAN$JOURNAL;1
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:40.21 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
-RMS-F-FUL, device full (insufficient space for allocation)
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:40.22 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
-SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:40.50 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
%QMAN-E-NODISKSPACE, disk space not available for queue manager to
continue
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:40.51 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
-QMAN-I-FREEDISK, free up 1044 blocks on disk _$1$DIA0
Copyright (c) Digital Equipment Corporation 1993, 1994. All rights
reserved.
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:42.69 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:42.87 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:42.94 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
%SECSRV-I-SERVERSTARTINGU, security server starting up
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:43.81 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
%SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now
starting u
p
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:44.43 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:46.76 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:48.98 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%SHOW-F-WRITEERR, error writing
SYS$SYSROOT:[SYS$STARTUP]NET$STARTUP_CHECKPRIVS.
DAT;4
-RMS-F-FUL, device full (insufficient space for allocation)
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:53.80 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:56.42 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:03:58.97 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:01.75 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
>> Executing SYSTARTUP_VMS.COM for VMS 6.2
startup procedure <<<
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:04.08 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) and security audit (SECURITY) on ALERTN,
system id: 62
474
Auditable event: Audit server starting up
Event time: 4-APR-2001 00:04:02.41
PID: 00000103
Username: SYSTEM
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:04.46 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file removal
Event time: 4-APR-2001 00:04:03.73
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file: $1$DIA0:[SYS0.SYSCOMMON.SYSEXE]ANALIMDMP.EXE;1
INSTALL flags: /PRIVILEGED
Privileges: CMKRNL,CMEXEC
%MOUNT-F-VOLALRMNT, another volume of same label already mounted
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:06.23 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%MOUNT-F-VOLALRMNT, another volume of same label already mounted
%SYSGEN-W-OPENIN, error opening $1$DIA20:[000000]PAGEFILE2.SYS; as input
-RMS-E-FNF, file not found
>> Disk Startup Complete <<<
>> Disk startup procedure completed <<<
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:09.01 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
Copyright (c) 1995 Digital Equipment Corporation. All rights reserved.
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:12.38 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%AMDS-I-RMSTART, starting Data Provider processing for this node
%AMDS-I-LOADSECDB, loading security database
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:14.57 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%AMDS-S-RMSUCCESS, Data Provider startup successful
>> Terminals Startup Complete <<<
>> Terminals startup procedure completed
<<<
>> Accounting disable procedure completed
<<<
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:17.13 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:19.09 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:19.05
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSLIB]UCX$ACCESS_SHR.EXE;3
INSTALL flags: /OPEN/SHARED
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:19.78 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:20.07 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:20.04
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file: $1$DIA0:[SYS0.SYSCOMMON.SYSMSG]UCX$MSG.EXE;3
INSTALL flags: /OPEN/SHARED
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:20.96 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:20.92
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSLIB]UCX$IPC_SHR.EXE;2
INSTALL flags: /OPEN/SHARED
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:21.94 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:21.90
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSLIB]UCX$RPCXDR_SHR.EXE;3
INSTALL flags: /OPEN/SHARED
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:22.30 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:22.90 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:22.86
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSLIB]UCX$CFS_SHR.EXE;3
INSTALL flags: /OPEN/SHARED/PROTECTED
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:23.93 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:23.89
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file: $1$DIA0:[SYS0.SYSCOMMON.SYSEXE]UCX$UCP.EXE;3
INSTALL flags: /OPEN/HEADER_RESIDENT/SHARED
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:24.87 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:28.27 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:31.01 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:33.59 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:33.55
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSEXE]UCX$BIND_SERVER.EXE;3
INSTALL flags: /OPEN/HEADER_RESIDENT/SHARED/PRIVILEGED
Privileges: OPER
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:34.05 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:34.58 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:34.54
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSEXE]UCX$BIND_SERVER_XFER.EX
E;2
INSTALL flags: /OPEN/HEADER_RESIDENT/SHARED/PRIVILEGED
Privileges: OPER
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:36.34 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:36.30
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file: $1$DIA0:[SYS0.SYSCOMMON.SYSEXE]UCX$FTPC.EXE;3
INSTALL flags: /OPEN/HEADER_RESIDENT/SHARED/PRIVILEGED
Privileges: PSWAPM,OPER
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:36.54 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - ERROR ACCESSING ERROR LOG FILE
%RMS-F-FUL, device full (insufficient space for allocati
%SYSTEM-W-DEVICEFULL, device full; allocation failure
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:36.60 %%%%%%%%%%%
Message from user SYSTEM on ALERTN
ERRFMT - DELETING ERRFMT PROCESS
ERROR LOG FILE UNWRITABLE
TO RESTART ERRFMT PROCESS, USE "@SYS$SYSTEM:STARTUP ERRFMT"
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:37.73 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:37.69
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file: $1$DIA0:[SYS0.SYSCOMMON.SYSEXE]UCX$FTPD.EXE;3
INSTALL flags: /OPEN/HEADER_RESIDENT/SHARED/PRIVILEGED
Privileges: SYSNAM,DETACH,WORLD,BYPASS
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:39.47 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:39.44
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file: $1$DIA0:[SYS0.SYSCOMMON.SYSEXE]UCX$FTP.EXE;3
INSTALL flags: /OPEN/HEADER_RESIDENT/SHARED/PRIVILEGED
Privileges: PSWAPM,OPER
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:41.00 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:40.97
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSLIB]UCX$LPD_SHR.EXE;3
INSTALL flags: /OPEN/SHARED
%%%%%%%%%%% OPCOM 4-APR-2001 00:04:41.68 %%%%%%%%%%%
Message from user AUDIT$SERVER on ALERTN
Security alarm (SECURITY) on ALERTN, system id: 62474
Auditable event: Installed file addition
Event time: 4-APR-2001 00:04:41.65
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: $1$DIA0:[SYS0.SYSCOMMON.][SYSEXE]INSTALL.EXE
Installed file:
$1$DIA0:[SYS0.SYSCOMMON.SYSEXE]UCX$LPD_RCV.EXE;3
INSTALL flags: /PRIVILEGED
Privileges: BYPASS
%%%%%%%%%%% OPCOM 4-APR-2001 00:05:40.50 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
%QMAN-E-NODISKSPACE, disk space not available for queue manager to
continue
%%%%%%%%%%% OPCOM 4-APR-2001 00:05:40.52 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
-QMAN-I-FREEDISK, free up 1044 blocks on disk _$1$DIA0
%%%%%%%%%%% OPCOM 4-APR-2001 00:07:40.50 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
%QMAN-E-NODISKSPACE, disk space not available for queue manager to
continue
%%%%%%%%%%% OPCOM 4-APR-2001 00:07:40.52 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
-QMAN-I-FREEDISK, free up 1044 blocks on disk _$1$DIA0
%%%%%%%%%%% OPCOM 4-APR-2001 00:09:40.51 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
%QMAN-E-NODISKSPACE, disk space not available for queue manager to
continue
%%%%%%%%%%% OPCOM 4-APR-2001 00:09:40.52 %%%%%%%%%%%
Message from user QUEUE_MANAGE on ALERTN
-QMAN-I-FREEDISK, free up 1044 blocks on disk _$1$DIA0
?02 EXT HLT
PC = 82221B4D
>>show boot
DIA0
>>
Chad Fernandez
Michigan, USA
4 Apr
4 Apr
4:47 p.m.
Well here it is......
I hooked the Vax up to my IBM Model 80 with Tera Term. Anybody have any
other favorite terminal programs?
I rather like TELIX, of course I prefer a real VT420.
What should I be able to see from the below info?
Well, with 44MB RAM on a VAX, you've a nice chunk of RAM. The big thing I
notice is that it looks like you probably need to go in and clean up old log
files a "PURGE *.LOG" right after logging in might help. It looks like you
probably also need to take a look at the OpenVMS FAQ and learn how to bypass
the password on the SYSTEM account so you can gain access to your system.
All in all it looks like you've got yourself a pretty nice VAX. It's a
great system for running VMS on.
One question, if you don't kill it while it's coming up like you apparently
did, will it boot all the way up to the login prompt?
Zane
5 Apr
5 Apr
4:15 a.m.
> Well here it is......
>
> I hooked the Vax up to my IBM Model 80 with Tera Term. Anybody have any
> other favorite terminal programs?
Tera Term is probably the best free vt100 emulating telnet for PC.
Anyone else have any recommendations...?
I rather like TELIX, of course I prefer a real VT420.
A great program. I wish the author had sent me back my vt100 and 220
manuals I shipped to Canada to help him with the emulation back in the
3.12 days.
-Bill
--
bpechter(a)monmouth.com | FreeBSD since 1.0.2, Linux since 0.99.10
Brainbench MVP | Unix Sys Admin since Sys V/BSD 4.2
Unix Sys.Admin. | Windows System Administration: "Magical Misery Tour"
5:16 a.m.
Tera Term is probably the best free vt100 emulating
telnet for PC.
Anyone else have any recommendations...?
NCSA Telnet for DOS isn't bad. (On the Mac, NCSA Telnet's practically standard
-- virtually all of the modern Telnet and SSH clients have descended from it).
I like Kermit otherwise, and Kermit runs on just about anything, even weird
things like Luxors.
--
----------------------------- personal page: http://www.armory.com/~spectre/ --
Cameron Kaiser, Point Loma Nazarene University * ckaiser(a)stockholm.ptloma.edu
-- Marry me and I'll never look at another horse! -- Groucho Marx -------------
2:33 p.m.
Cameron Kaiser skrev:
> Tera Term is probably the best free vt100
emulating telnet for PC.
> Anyone else have any recommendations...?
NCSA Telnet for DOS isn't bad. (On the Mac, NCSA
Telnet's practically
standard
-- virtually all of the modern Telnet and SSH clients have descended from
it). I like Kermit otherwise, and Kermit runs on just about anything, even
weird things like Luxors.
I really prefer a telnet client with ZModem support. On Win#? systems, I use
CRT (Combined Rlogin and Telnet), on AmigaOS AmTelnet.
--
En ligne avec Thor 2.6a.
We have support for the PMAGC-B's on pmax right? That is a PixelVision based
card right? I see Bt 463, that chip looks bigger than the 21164! Just looking
at it makes me want to write an Xserver!
Chris Tribo, NetBSD/pmax
5:31 a.m.
On Thursday, April 5, 2001, at 09:15 AM, Bill Pechter wrote:
I always liked Telix. In the 2.X timeframe, before he added the
internal support for Zmodem with the 3.X release, I used to interface
any new protocal that came out with it using a menu program I wrote in
PowerBasic. I continued to run the 2.X version long after the release
of 3.X because it was smaller and faster. Since I tended to run it on
an XT class machine, that was an important consideration. The later
versions worked great on the 286's I had access to elsewhere though.
Jeff
I rather like
TELIX, of course I prefer a real VT420.
A great program. I wish the author had sent me back my vt100 and 220
manuals I shipped to Canada to help him with the emulation back in the
3.12 days.
11:32 a.m.
Zane,
healyzh(a)aracnet.com wrote:
No, I don't hink so. It keeps on giving me those errors every 2
minutes.
Chad Fernandez
Michigan, USA
I rather like TELIX, of course I prefer a real VT420.
I think I have an older DOS version of Telix. Maybe, I'll give it a
try.
What should I
be able to see from the below info?
Well, with 44MB RAM on a VAX, you've a nice chunk of RAM. The big thing I
notice is that it looks like you probably need to go in and clean up old log
files a "PURGE *.LOG" right after logging in might help. It looks like you
probably also need to take a look at the OpenVMS FAQ and learn how to bypass
the password on the SYSTEM account so you can gain access to your system.
All in all it looks like you've got yourself a pretty nice VAX. It's a
great system for running VMS on.
One question, if you don't kill it while it's coming up like you apparently
did, will it boot all the way up to the login prompt?
3:07 p.m.
I think I have an older DOS version of Telix. Maybe,
I'll give it a
try.
I just realized something. I've never tested the keypad emulation, so I'm
not to sure how well it handles that. BTW, if you've got a UNIX box, I've
got a shell script that I got from someone that turns an Xterm window into a
pretty good VT100. ftp://zane.brouhaha.com/pub/vms/vt100.sh
One question,
if you don't kill it while it's coming up like you apparently
did, will it boot all the way up to the login prompt?
No, I don't hink so. It keeps on giving me those errors every 2
minutes. 
4 Apr
4 Apr
6:06 p.m.
You should be able to do a BOOT/R5:00000001 DIA0: and at the SYSBOOT>
prompt do a SET STARTUP_P1 "MIN"
SYSBOOT> CONTINUE to get to a minimum
boot prompt to delete stuff. If it asks for a password and you don't know
it you might have to gp back to SYSBOOT> and do the SET UAFALTERNATE 1 or
"TRUE" or whatever it says in the VMS FAQ (going from memory here)
(if you do need to crack the SYSTEM password, unlike what is says in the
VMS FAQ I found that you don't need to enter SYSTEM as the password you
can enter whatever you want or blank at the password prompt and then hit
CTRL Z a few times once you've passed the password prompt and you will
get in once that UAFALTERNATE is changed)
Once in to $ you can do a
SET DEF DIA0:[000000]
PURGE/LOG [...]*.log,[...]*.old
to get rid of old file versions that might be left lying around taking up
space
DIRECT/SEL=SIZ=MIN=1000 [...]
to look for large files or whatever
Paul
--
5 Apr
5 Apr
3:28 p.m.
Paul Thompson wrote:
You should be able to do a BOOT/R5:00000001 DIA0: and at the SYSBOOT>
prompt do a SET STARTUP_P1 "MIN"
Took for ever for me to get that to work.
SYSBOOT> CONTINUE to get to a minimum
boot prompt to delete stuff. If it asks for a password and you don't know
it you might have to gp back to SYSBOOT> and do the SET UAFALTERNATE 1 or
"TRUE" or whatever it says in the VMS FAQ (going from memory here)
It never got to a password. It complains that a file is bad. Here is a
partial screen capture:
SYSBOOT> SET STARTUP_P1 "MIN"
SYSBOOT> CONTINUE
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
OpenVMS (TM) VAX Version V6.2 Major version id = 1 Minor version
id = 0
%DECnet-I-LOADED, network base image loaded, version = 05.08.00
%SYSINIT, primary PAGEFILE.SYS not found; system initialization
continuing
Error opening primary input file SYS$INPUT
Error in file name
(if you do need to crack the SYSTEM password, unlike what is says in the
VMS FAQ I found that you don't need to enter SYSTEM as the password you
can enter whatever you want or blank at the password prompt and then hit
CTRL Z a few times once you've passed the password prompt and you will
get in once that UAFALTERNATE is changed)
I'll look up the VMS faq now. I probably should look through it :-)
Once in to $ you can do a
SET DEF DIA0:[000000]
PURGE/LOG [...]*.log,[...]*.old
to get rid of old file versions that might be left lying around taking up
space
DIRECT/SEL=SIZ=MIN=1000 [...]
to look for large files or whatever
Well, hopefully I'll get this far eventually!
Chad Fernandez
Michigan, USA
5:01 p.m.
You should be
able to do a BOOT/R5:00000001 DIA0: and at the SYSBOOT>
prompt do a SET STARTUP_P1 "MIN"
Took for ever for me to get that to work.
SYSBOOT> CONTINUE to get to a minimum
boot prompt to delete stuff. If it asks for a password and you don't know
it you might have to gp back to SYSBOOT> and do the SET UAFALTERNATE 1 or
"TRUE" or whatever it says in the VMS FAQ (going from memory here)
It never got to a password. It complains that a file is bad. Here is a
partial screen capture:
SYSBOOT> SET STARTUP_P1 "MIN"
SYSBOOT> CONTINUE
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
OpenVMS (TM) VAX Version V6.2 Major version id = 1 Minor version
id = 0
%DECnet-I-LOADED, network base image loaded, version = 05.08.00
%SYSINIT, primary PAGEFILE.SYS not found; system initialization
continuing
Error opening primary input file SYS$INPUT
Error in file name From SYSBOOT> try "SET/STARTUP OPA0:"
When you get the DCL
prompt, first type "SET NOON" to avoid getting kicked
out
if you make a typo, then type "SPAWN". At the prompt type
"@SYS$SYSTEM:STARTUP" to continue the rest of the system
startup. After the startup is complete set default to
SYS$SYSTEM and then do an "MCR AUTHORIZE". Change the
system password to whatever you want, and use the
/NOPWDE flag so you don't have to change it the first
time you log in. When you are done, type "EXIT". The
system is now done booting.
Of course, if the normal startup isn't working, after
the "SPAWN" go ahead and change the password, clean up
any old .LOG files if you need to free up space, and
fix any configuration files. You'll also need to
to go into SYSGEN and type "SET/STARTUP SYS$SYSTEM:STARTUP.COM"
to return the startup to normal.
--
Eric Dittman
dittman(a)dittman.net
5:52 p.m.
This jogs another memory. I think there might be something in SYSBOOT you
have to change to get SYS$INPUT to be OPA0: (the operator console) so you
get a DCL prompt.
Definitely one for VMS FAQ.
On Thu, 5 Apr 2001, Paul Thompson wrote:
Does it just hang or reboot here, or does control Z or
enter cause any
changes?
On Thu, 5 Apr 2001, Chad Fernandez wrote:
--
Error opening primary input file SYS$INPUT
Error in file name
6 Apr
6 Apr
6:21 p.m.
Paul,
Can you give me the url for the FAQ? I am having problems with this
thing. I can get to the $ prompt, but I can't find anything.... it
keeps on telling me that stuff doesn't exist! Maybe it's got something
with the DCL prompt. I didn't see anything like that..... I went from
the >>> to the $ directly.
Chad Fernandez
Michigan, USA
Paul Thompson wrote:
This jogs another memory. I think there might be something in SYSBOOT you
have to change to get SYS$INPUT to be OPA0: (the operator console) so you
get a DCL prompt.
Definitely one for VMS FAQ.
7:12 p.m.
Can you give me the url for the FAQ? I am having
problems with this
http://www.openvms.compaq.com/wizard/openvms_faq.html
Also look at the following if you haven't already:
http://www.openvms.compaq.com:8000/
Zane
11:06 a.m.
It just stops. I tried pressing return, maybe control z, too. Nothing
seems to happen.
Chad Fernandez
Michigan, USA
Paul Thompson wrote:
Does it just hang or reboot here, or does control Z or enter cause any
changes?
On Thu, 5 Apr 2001, Chad Fernandez wrote:
Error opening primary input file SYS$INPUT
Error in file name
--
8490
days inactive
8492
days old
15 comments
8 participants
participants (8)
-
dittman＠dittman.net -
fernande＠internet1.net -
healyzh＠aracnet.com -
jhellige＠earthlink.net -
optimus＠canit.se -
pechter＠pechter.dyndns.org -
spectre＠stockholm.ptloma.edu -
thompson＠mail.athenet.net