12 Jan
2002
12 Jan
'02
7:46 a.m.
Hi.
Every time I switch my MicroVAX 3900 on it says:
-----
?42 2 0C FF 00 0000
P1=2004CBA6 P2=FFFFFF0C P3=00000001 P4=00000000 P5=00000000
P6=00000000 P7=00000000 P8=00000000 P9=00000000 P10=00000000
r0=0000000C r1=00000000 r2=00000042 r3=2014078C r4=20051269
r5=20051096 r6=200550A7 r7=00000000 r8=00000000 ERF=80000000
?C6 2 01 FF 00 0001
P1=00000000 P2=00000000 P3=00000000 P4=00000000 P5=00000000
P6=00000000 P7=00000000 P8=00000000 P9=00000000 P10=00000000
r0=00000000 r1=00000022 r2=00000080 r3=201407A4 r4=2004D2F0
r5=2004D310 r6=2004D316 r7=00000000 r8=00000000 ERF=80000000
KA655-A V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..
?53 2 05 FF 00 0002
P1=00000002 P2=00000028 P3=00000000 P4=00D45577 P5=00000000
P6=FFFFFFFF P7=00000000 P8=00000000 P9=20051BD2 P10=20051CE0
r0=00000001 r1=00000001 r2=00000053 r3=00000000 r4=00000002
r5=2004E8F9 r6=200551A9 r7=00000000 r8=00000000 ERF=82000180
30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Normal operation not possible.
>>
-----
What does it want to tell me?
I get the same if I restart it via the reset button after power up. If
it was running for a wile I don't get an error on reset. If I switch
the power off for a few secounds I get the error again. NiCd akku?
--
tschuess,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz
12 Jan
12 Jan
7:56 a.m.
Every time I switch my MicroVAX 3900 on it says:
What boards do you have in your system?
--
Eric Dittman
dittman(a)dittman.net
Check out the DEC Enthusiasts Club at http://www.dittman.net/
10:03 a.m.
New subject: My P70 on ebay (info)
In case anyone wants to take a loo it's item 1321506964 on ebay. Not the run
of the mill junker either so if no one bids I'll keep it a few more years
until all the junk P70's are gone - I've taken too good of care with this
since I've had it.
10:37 a.m.
New subject: My P70 on ebay (info)
In case anyone wants to take a loo it's item
1321506964 on ebay. Not the run
of the mill junker either so if no one bids I'll keep it a few more years
until all the junk P70's are gone - I've taken too good of care with this
since I've had it.
Russ,
Nice P70. Which MCA memory card did you use to add the
additional 8MB of RAM?
Jeff
--
Home of the TRS-80 Model 2000 FAQ File
http://www.cchaven.com
http://www.geocities.com/siliconvalley/lakes/6757
11:05 a.m.
New subject: My P70 on ebay (info)
I'll look when I open it back up to slip the SLC chip in before packing -
not sure of the FRU, just know it's an IBM type rather than a Kingston,
Cumulus, etc.
-----Original Message-----
From: owner-classiccmp(a)classiccmp.org
[mailto:owner-classiccmp@classiccmp.org]On Behalf Of Jeff Hellige
Sent: Saturday, January 12, 2002 6:37 PM
To: classiccmp(a)classiccmp.org
Subject: Re: My P70 on ebay (info)
In case anyone wants to take a loo it's item
1321506964 on ebay. Not the
run
of the mill junker either so if no one bids I'll
keep it a few more years
until all the junk P70's are gone - I've taken too good of care with this
since I've had it.
Russ,
Nice P70. Which MCA memory card did you use to add the
additional 8MB of RAM?
Jeff
--
Home of the TRS-80 Model 2000 FAQ File
http://www.cchaven.com
http://www.geocities.com/siliconvalley/lakes/6757
10:44 a.m.
New subject: My P70 on ebay (info)
In case anyone wants to take a loo it's item
1321506964 on ebay. Not the run
of the mill junker either so if no one bids I'll keep it a few more years
until all the junk P70's are gone - I've taken too good of care with this
since I've had it.
It's already gone, courtesy of "Buy it Now." Nice unit; nice sale.
11:05 a.m.
New subject: My P70 on ebay (info)
I just found out myself - quick!. The guy asked me about one once before but
I wasn;t ready to give my baby up at that point. Things are too crowded
around here so it's time to tighten the belt rather than make the stacks
higher.
-----Original Message-----
From: owner-classiccmp(a)classiccmp.org
[mailto:owner-classiccmp@classiccmp.org]On Behalf Of Wayne M. Smith
Sent: Saturday, January 12, 2002 6:45 PM
To: classiccmp(a)classiccmp.org
Subject: Re: My P70 on ebay (info)
In case anyone wants to take a loo it's item
1321506964 on ebay. Not the
run
of the mill junker either so if no one bids I'll
keep it a few more years
until all the junk P70's are gone - I've taken too good of care with this
since I've had it.
It's already gone, courtesy of "Buy it Now." Nice unit; nice sale.
12:26 p.m.
New subject: My P70 on ebay (info)
On Sat, Jan 12, 2002 at 06:03:17PM -0600, Russ Blakeman wrote:
In case anyone wants to take a loo it's item
1321506964 on ebay. Not the run
of the mill junker either so if no one bids I'll keep it a few more years
until all the junk P70's are gone - I've taken too good of care with this
since I've had it.
I've got a pair of P70s here; one worked fine (but had a bad HD), one
I could never get to power up; I tried to swap the HD from one to the
other and they never powered up again. 8-(
Anybody want them for parts? Free for pickup; austin .tx.
--
Bill Bradford
mrbill(a)mrbill.net
Austin, TX
3:33 p.m.
New subject: My P70 on ebay (info)
There are three P70 mainboards on ebay right now cheap - item 1321368277
(no, not mine)
-----Original Message-----
From: owner-classiccmp(a)classiccmp.org
[mailto:owner-classiccmp@classiccmp.org]On Behalf Of Bill Bradford
Sent: Saturday, January 12, 2002 8:26 PM
To: classiccmp(a)classiccmp.org
Subject: Re: My P70 on ebay (info)
On Sat, Jan 12, 2002 at 06:03:17PM -0600, Russ Blakeman wrote:
In case anyone wants to take a loo it's item
1321506964 on ebay. Not the
run
of the mill junker either so if no one bids I'll
keep it a few more years
until all the junk P70's are gone - I've taken too good of care with this
since I've had it.
I've got a pair of P70s here; one worked fine (but had a bad HD), one
I could never get to power up; I tried to swap the HD from one to the
other and they never powered up again. 8-(
Anybody want them for parts? Free for pickup; austin .tx.
--
Bill Bradford
mrbill(a)mrbill.net
Austin, TX
8:22 p.m.
On 12 Jan, Eric Dittman wrote:
What boards do you have in your system?
In this
QBus order:
1 x KA655,
4 x 16 MB RAM,
1 x DELQA,
1 x CXA16,
1 x QT14 (Emulex TMSCP pertec controller)
1 x KFQSA
1 x RX02 clone 8" floppy controller.
I don't think that it has to do with the IO boards or the enclosure.
This CPU was in a BA123 with different boards before I swaped the CPUs
of this MV III+ and the MV3800.
--
tschuess,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz
8:07 p.m.
On 12 Jan, Paul Thompson wrote:
What does T 9E say?
This might cross reference some of the error codes.
Ahhh! Nice to know this test
numbers. Is there a list available on the
net?
OK. I get the errors:
?42 2 0C FF 00 0000
?C6 2 01 FF 00 0001
?53 2 05 FF 00 0002
t 9e lists this codes as:
42 20051269 Check_for_intrs ***
C6 2004D2F0 SSC_powerup *********
53 2004E8C0 TOY clock repeat_test_250ms_ea Tolerance ***
TOY clock is OK, as I expect the NiCd akku to be ded. But
"Check_for_intrs" and "SSC_powerup" are not that explanative to me.
--
tschuess,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz
8380
days inactive
8381
days old
11 comments
7 participants
participants (7)
-
dittman＠dittman.net -
jhellige＠earthlink.net -
jkunz＠unixag-kl.fh-kl.de -
mrbill＠mrbill.net -
rhblakeman＠kih.net -
thompson＠mail.athenet.net -
wmsmith＠earthlink.net