5 Dec
1998
5 Dec
'98
4:11 p.m.
"Jason Willgruber" <roblwill(a)usaor.net> writes:
-Networking software compatible with the internal
networking card (there"s a
plug next to the keyboard connector that looks like it wants to be connected
to some sort of network hub).
Looks can be deceiving. That might be an HP-HIL connector -- does it
have a picture of the corresponding plug with one or two dots on the
cable, or maybe just the one or two dots? If so, it's HIL, and is
there so you can hook up a Vectra HIL keyboard (as shipped with the
real original Vectras that don't have alphabet soup after the word
"Vectra") or an HIL mouse or an HIL monitor w/touchscreen.
-Frank McConnell
6 Dec
6 Dec
7:53 a.m.
New subject: HP-HIL keyboards & mice (was Re: HP Vectra networking (26 days OT))
Frank McConnell wrote:
Looks can be deceiving. That might be an HP-HIL
connector -- does it
Speaking of which, I need an HP-HIL mouse for use with my 16500A logic
analyzer, and I'd also like to get an HP-HIL keyboard to try with it (I'm
not sure it supports a keyboard).
Anyone got extras? If so, let me know what you want for them.
Thanks!
Eric
11:53 a.m.
New subject: HP-HIL keyboards & mice (was Re: HP Vectra networking (26 days OT))
Eric,
Yes, I have a few extras.
Joe
At 09:53 PM 12/6/98 -0000, you wrote:
Frank McConnell wrote:
Looks can be deceiving. That might be an HP-HIL
connector -- does it
Speaking of which, I need an HP-HIL mouse for use with my 16500A logic
analyzer, and I'd also like to get an HP-HIL keyboard to try with it (I'm
not sure it supports a keyboard).
Anyone got extras? If so, let me know what you want for them.
Thanks!
Eric
7 Dec
7 Dec
4:49 a.m.
Frank McConnell wrote:
"Jason Willgruber" <roblwill(a)usaor.net> writes:
That all sounds plausible, but I do not think that HP Vectras ever used
the HIL standard. When I get back to Grenoble (where the Vectras were
designed) next week I will root around and see what I can dig up on this
machine.
Regards
_---_--__-_-_----__-_----_-__-__-_-___--_-__--___-__----__--_--__-___-
Hans B Pufal Comprehensive Computer Catalogue
<mailto:hansp@digiweb.com> <http://digiweb.com/~hansp/ccc>
-Networking software compatible with the internal
networking card (there"s a
plug next to the keyboard connector that looks like it wants to be connected
to some sort of network hub).
Looks can be deceiving. That might be an HP-HIL connector -- does it
have a picture of the corresponding plug with one or two dots on the
cable, or maybe just the one or two dots? If so, it's HIL, and is
there so you can hook up a Vectra HIL keyboard (as shipped with the
real original Vectras that don't have alphabet soup after the word
"Vectra") or an HIL mouse or an HIL monitor w/touchscreen.
9575
days inactive
9576
days old
3 comments
4 participants
participants (4)
-
eric＠brouhaha.com -
fmc＠reanimators.org -
hansp＠digiweb.com -
rigdonj＠intellistar.net