door switch >may be the problem. I've had 2 AS2100s fail to power on when the PCB in the >LCD/switch panel became loose in its mounts. It's mounted on 4 split pins and the >PCB wears and I think the pins lose their spring, so when you close the door it pushes >the whole board aside instead of closing the switch. jammed the point of a >plastic toothpick into the center of each of the split pins and cut it off flush. :-) 2009/10/19 Curt @ Atari Museum <curt at atarimuseum.com>: The safety switch and the power switch are working OK. I'm leaning towards the IO board being faulty. I've now tried another cpu and another memory board I had knocking about. Should the machine start up with nothing in it but the IO board. ie. no CPU, memory, scsi boards etc in the machine ? Thanks Dan

Hi there, just changed my e-mail address :) Maybe someone can help here :oD I got a Tek 3001GPX logic analyzer. It came bare, without pods, software or manuals. Maybe someone has an equal and may DD the boot/software disks for me? Also, I'm in need of the following items, if the price is right (in order of need): - Boot/software/diagnostic disks - At least ONE pod, so I can copy it and make it work. Or the schematics of the pod - The Hard disk interface - preferably IDE, since it will be very hard to find a st412/st506 unit here in Brazil - Original manuals (they are beautiful :D) - Any interesting add-ons :oD Thanks Alexandre Souza, PU1BZZ