3 Mar
2021
3 Mar
'21
8:17 a.m.
Hello everyone,
Does anyone have the?Intellec MCS-8 8008 system monitor ROM files?
According to the Intellec MCS-8 manual the System Monitor is contained in five 1702A
PROMs.My ROMs have a disk loader, but the disks system is long gone...
Any papertape software is also welcome for this machine!
Thanks in advance!Regards, Roland Huisman
3 Mar
3 Mar
11:25 a.m.
On 03/03/2021 07:17 AM, Roland via cctech wrote:
Hello everyone,
Does anyone have the Intellec MCS-8 8008 system monitor ROM files?
According to the Intellec MCS-8 manual the System Monitor is contained in five 1702A
PROMs.My ROMs have a disk loader, but the disks system is long gone...
Any papertape software is also welcome for this machine!
Thanks in advance!Regards, Roland Huisman
Wow, I have an old 8008-based embedded device I built back
in 1976. It has the MCS 8008 CPU board, 1702 EPROM board and
a RAM board. I never had the system monitor, I did
everything on that project "bare iron". I think I did
development with a PDP-11 and a homebrew cross assembler.
Jon
11:47 a.m.
Although this may not be what you're looking for, it's in the ballpark
(newer version?): Note the board part number and compare with yours, I
don't see off hand which board exactly you have.
https://www.vintagecomputer.net/intel/IMM_6-26/
Bill
On Wed, Mar 3, 2021 at 11:25 AM Jon Elson via cctech <cctech at classiccmp.org>
wrote:
On 03/03/2021 07:17 AM, Roland via cctech wrote:
Hello everyone,
Does anyone have the Intellec MCS-8 8008 system monitor ROM files?
According to the Intellec MCS-8 manual the System Monitor is contained
in five
1702A PROMs.My ROMs have a disk loader, but the disks system is
long gone...
Any papertape software is also welcome for this machine!
Thanks in advance!Regards, Roland Huisman
Wow, I have an old 8008-based embedded device I built back
in 1976. It has the MCS 8008 CPU board, 1702 EPROM board and
a RAM board. I never had the system monitor, I did
everything on that project "bare iron". I think I did
development with a PDP-11 and a homebrew cross assembler.
Jon
7:49 p.m.
FWIW, I have an MCS-8 User Manual I was about to give away.
https://photos.google.com/photo/AF1QipPxTeFNI5YY-Ig_xZihpEyeaVjivCjDrU1_vmOa
If either of you want it, it's yours.
On Wed, Mar 3, 2021 at 11:48 AM Bill Degnan via cctech <
cctech at classiccmp.org> wrote:
Although this may not be what you're looking for,
it's in the ballpark
(newer version?): Note the board part number and compare with yours, I
don't see off hand which board exactly you have.
https://www.vintagecomputer.net/intel/IMM_6-26/
Bill
On Wed, Mar 3, 2021 at 11:25 AM Jon Elson via cctech <
cctech at classiccmp.org>
wrote:
On 03/03/2021 07:17 AM, Roland via cctech wrote:
Hello everyone,
Does anyone have the Intellec MCS-8 8008 system monitor ROM files?
According to the Intellec MCS-8 manual the System Monitor is contained
in five
1702A PROMs.My ROMs have a disk loader, but the disks system is
long gone...
Any papertape software is also welcome for this machine!
Thanks in advance!Regards, Roland Huisman
Wow, I have an old 8008-based embedded device I built back
in 1976. It has the MCS 8008 CPU board, 1702 EPROM board and
a RAM board. I never had the system monitor, I did
everything on that project "bare iron". I think I did
development with a PDP-11 and a homebrew cross assembler.
Jon
1241
days inactive
1242
days old
3 comments
4 participants
participants (4)
-
billdegnan＠gmail.com -
elson＠pico-systems.com -
roelof_klaas＠yahoo.com -
tony.aiuto＠gmail.com