3 Jun
2009
3 Jun
'09
7:40 a.m.
I want to purchase in a few days from now one BA11-SB enclosure (tabletop
type) to swap all the boards of my PDP-11/23 PLUS (my actual enclosure don't
have a box cover). But there is a problem: The box is prepared to put a
couple of mini back-panels, I suppose with the intention of put a couple of
rs-232 ports, or another kind of connectors (network, etc)... but there are
no panels.
I believe that I saw something similar for one PDP-11 24 some months ago but
I'm not sure.
Trying to avoid homebrew solutions... someone knows about a product from
Digital or 3rd party for this purpose ?
Kind Regards
Sergio
3 Jun
3 Jun
8:09 a.m.
2009/6/3 SPC <spedraja at ono.com>:
But there is a problem: The box is prepared to put a
couple of mini back-panels, I suppose with the intention of put a couple of
rs-232 ports, or another kind of connectors (network, etc)... but there are
no panels.
...
Trying to avoid homebrew solutions... someone knows
about a product from
Digital or 3rd party for this purpose ?
Do you mean the cigarette box-sized panels that screw into the
distribution panel? Blank panels, or with ports mounted (and if so,
which ports)?
Cheers,
--
Steve Maddison
http://www.cosam.org/
9:11 a.m.
Do you mean the cigarette box-sized panels that screw
into the
distribution panel? Blank panels, or with ports mounted (and if so,
which ports)?
Exactly. With ports mounted. The BA11-SB box supports a couple of them.
I need one with a couple of RS232 ports (because the KDF11-B comes with a
couple of SLUs)
Eventually, it would be great to get other panel with one Ethernet connector
plus others.
Regards
Sergio
9:39 a.m.
On 3 Jun 2009, at 18:11, SPC <spedraja at ono.com> wrote:
Exactly. With ports mounted. The BA11-SB box supports
a couple of
them.
I need one with a couple of RS232 ports (because the KDF11-B comes
with a
couple of SLUs)
I'm guessing you need one fitted with those small (10-way?) AMP
connectors. I believe it's known as a D315 panel.
Eventually, it would be great to get other panel with
one Ethernet
connector
plus others.
I can fix you up with a DEQNA/DELQA cab kit if you need one.
Cheers,
Steve
3:24 p.m.
I need one with a couple of RS232 ports (because the KDF11-B comes with a
Thanks ! It appears as an element of the 11/84 in some sellers.
Eventually, it would be great to get other panel with one Ethernet
couple of SLUs)
I'm guessing you need one fitted with those small (10-way?) AMP connectors.
I believe it's known as a D315 panel.
connector
plus others.
I can fix you up with a DEQNA/DELQA cab kit if you need one.
Thanks again. Let me receive the box and the back panel and I shall tell you
something.
By the way... I am using one old IBM XT to enclose one EDSI hard disk to use
with the PDP. I have too a couple of RX33 diskette units (more or less
standard, not RX50), but I don't know if I can use them with one PDP-11.
Regards
Sergio
5465
days inactive
5465
days old
4 comments
3 participants
participants (3)
-
spedraja＠ono.com -
steve.cosam＠gmail.com -
steve＠cosam.org