14 Oct
2016
14 Oct
'16
1:05 p.m.
Hi, although somewhat off topic, unless I'm reprogramming antique computers :)
...
I was wondering if anyone might know where I could find an A/B switchbox for a 10-pin JTAG
cable?
(An old-fashioned mechanical switch would work for my purposes, but I don't want to
have to try to build one :)
thanks,
Stan
14 Oct
14 Oct
1:31 p.m.
Watch out doing a hard common of the grounds. It may not turn out
pretty. Also make sure there is no VCC routed up the cable.
thanks.
You might well get by with a normal serial DB-9 and some creative cable
making if memory serves. At least the 1194 stuff is only 5 signals.
Some of the jtag pinouts include break and trigger signals though.
Jim
On 10/14/2016 1:05 PM, sieler_allegro wrote:
Hi, although somewhat off topic, unless I'm
reprogramming antique computers :)
...
I was wondering if anyone might know where I could find an A/B switchbox for a 10-pin
JTAG cable?
(An old-fashioned mechanical switch would work for my purposes, but I don't want to
have to try to build one :)
thanks,
Stan
3:29 p.m.
On 10/14/2016 01:05 PM, sieler_allegro wrote:
Hi, although somewhat off topic, unless I'm
reprogramming antique
computers :) ...
I was wondering if anyone might know where I could find an A/B
switchbox for a 10-pin JTAG cable?
(An old-fashioned mechanical switch would work for my purposes, but I
don't want to have to try to build one :)
I'd try a plain old parallel printer manual A-B (C-D) switch box.
They're still available and fairly inexpensive. You have at least 10
independent conductors--and many of these switch all 25 conductors.
Like this:
https://www.amazon.com/CablesOnline-Parallel-Printer-Rotary-SB-001/dp/B00E6…
--Chuck
2992
days inactive
2992
days old
2 comments
3 participants
participants (3)
-
cclist＠sydex.com -
jwsmail＠jwsss.com -
sieler＠allegro.com