30 Nov
2004
30 Nov
'04
5:39 a.m.
Ron Hudson <ron.hudson(a)sbcglobal.net> wrote:
Subject: MSDos on a dial up ISP?
How do you do that?
Take a look at CWRU-PC/IP:
ifctfvax.Harhan.ORG:/pub/micro/msdos/net/
For dial-up you'll also need a Class1-emulating packet driver for your
SLIP or PPP. Ask your ISP if they could perhaps set you up with SLIP
instead of PPP as it's much less painful under DOS.
MS,
who has connected to Inet from DOS in this manner prior to starting Harhan
in 2000.
30 Nov
30 Nov
9:23 a.m.
I tried nettammer, since it has a built in dialer and packet
driver, I guess my modem must be a winmodem, no matter what port
I select, the modem never actually goes off hook.
It's an internal modem in a laptop. (IBM Thinkpad 390)
On Nov 30, 2004, at 8:39 AM, Michael Sokolov wrote:
Ron Hudson <ron.hudson(a)sbcglobal.net> wrote:
Subject: MSDos on a dial up ISP?
How do you do that?
Take a look at CWRU-PC/IP:
ifctfvax.Harhan.ORG:/pub/micro/msdos/net/
For dial-up you'll also need a Class1-emulating packet driver for your
SLIP or PPP. Ask your ISP if they could perhaps set you up with SLIP
instead of PPP as it's much less painful under DOS.
MS,
who has connected to Inet from DOS in this manner prior to starting
Harhan
in 2000.
7255
days inactive
7255
days old
1 comments
2 participants
participants (2)
-
msokolov＠ivan.Harhan.ORG -
ron.hudson＠sbcglobal.net