20 Feb
2015
20 Feb
'15
4:10 a.m.
Folks,
Some time ago I bought an IBM Model-11 electro-mechanical punch on E-Bay. It
was in a bit of a mess as someone had partially dismantled it and not
re-assembled it properly. It was also missing a couple of the operating
buttons. I have had some replacement parts made, and re-assembled it
properly. It now works reasonably well. I have made a short video of it
operating here:-
http://youtu.be/ogplYeEYzu8
Hope you enjoy this.
Dave Wade
G4UGM
20 Feb
20 Feb
7:49 a.m.
Dave,
Nice work! I can see a lot of value in having something like this around,
and it certainly saves floor space compared to a 26. -C
On Fri, Feb 20, 2015 at 6:10 AM, Dave G4UGM <dave.g4ugm at gmail.com> wrote:
Folks,
Some time ago I bought an IBM Model-11 electro-mechanical punch on E-Bay.
It
was in a bit of a mess as someone had partially dismantled it and not
re-assembled it properly. It was also missing a couple of the operating
buttons. I have had some replacement parts made, and re-assembled it
properly. It now works reasonably well. I have made a short video of it
operating here:-
http://youtu.be/ogplYeEYzu8
Hope you enjoy this.
Dave Wade
G4UGM
9:39 a.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Cory
Heisterkamp
Sent: 20 February 2015 15:49
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: IBM-11 Card Punch
Dave,
Nice work! I can see a lot of value in having something like this around, and it
certainly saves floor space compared to a 26. -C
As it is in my loft room , what in the USA you would call the 3rd floor, I don't think
I would ever get an 029 or 026 up there. I was once quite competent on these devices. In
my first IT job we had a hand punch for small amendments say to JCL or Cobol programs.
Dave
On Fri, Feb 20, 2015 at 6:10 AM, Dave G4UGM
<dave.g4ugm at gmail.com>
wrote:
Folks,
Some time ago I bought an IBM Model-11 electro-mechanical punch on E-
Bay.
> It
> was in a bit of a mess as someone had partially dismantled it and not
> re-assembled it properly. It was also missing a couple of the
> operating buttons. I have had some replacement parts made, and
> re-assembled it properly. It now works reasonably well. I have made a
> short video of it operating here:-
>
>
>
> http://youtu.be/ogplYeEYzu8
>
>
>
> Hope you enjoy this.
>
>
>
> Dave Wade
>
> G4UGM
>
> 
9:44 a.m.
On Fri, Feb 20, 2015 at 10:49 AM, Cory Heisterkamp
<coryheisterkamp at gmail.com> wrote:
Dave,
Nice work! I can see a lot of value in having something like this around,
and it certainly saves floor space compared to a 26. -C
Desktop device vs desk. (I have an 026... at least it's a small desk).
-ethan
3593
days inactive
3593
days old
3 comments
3 participants
participants (3)
-
coryheisterkamp＠gmail.com -
dave.g4ugm＠gmail.com -
ethan.dicks＠gmail.com