Will give it a try, thanks. -> -----Original Message----- -> From: owner-classiccmp(a)classiccmp.org -> [mailto:owner-classiccmp@classiccmp.org]On Behalf Of Jim Tuck -> Sent: Wednesday, August 08, 2001 10:25 PM -> To: &#39;classiccmp(a)classiccmp.org&#39; -> Subject: RE: Two NICs in one machine - how? -> -> -> I dealt with a similar prob.. Came down to both cards were factory set -> to -> hard IO/IRQ assignment. Just grab the 3Com config tools, set them to -> 0x280 and 0x300 IRQ 10 and 11(or whatever you have free). -> -> Mine were both 529 tho.. -> -> Jim -> -> On Wednesday, August 08, 2001 6:26 PM, Russ Blakeman -> [SMTP:rhblake@bigfoot.com] wrote: -> > Curious if any ethernet experts are out there - I finally got my PS/2 -> > 9595-OPT server out of storage and built with WinNT4.0 and originally -> > wanted -> > to put two NICs in - one is a 3Com 3C523 with AUI/Coax and the other -> > is a -> > 3C529TP with AUI/RJ45 - both ethernet though. NT finds thema nd -> seems -> > to -> > agree with them and I am able to give each a TCP/IP address but the -> > network -> > never comes up. If I pull the 523 (or even the 529) it does. Where's -> > the -> > conflict coming from? What's the easiest way to correct this? I've -> had -> > token -> > ring and ethernet in at the same time int he past fine but the -> problem -> > seems -> > to be due to the same type of network topology being duplicated. -> > << File: ATT00001.html >> -> -> -> -> ->