16 Apr
2008
16 Apr
'08
10:21 a.m.
Hello
I'm french and i've be seen your comments in last year what about
hard disk problem of HP 16505A.
Can you help me
Try to contact me please
I search any information about this device
thanks
Fernando from Paris
16 Apr
16 Apr
10:04 p.m.
On Wed, Apr 16, 2008 at 10:21 AM, Cunha Fernando <batata1 at free.fr> wrote:
Hello
I'm french and i've be seen your comments in last year what about
hard disk problem of HP 16505A.
Can you help me
Try to contact me please
I search any information about this device
thanks
Fernando from Paris
If anyone happens to have an OS install CD (I believe that is
"reignite" in HP-UX terms) I'd like to get an .ISO image of that. I
have an HP 16505A with the software already installed but it would be
nice to be able to reinstall a fresh image on a bare hard drive.
An HP 16505A is really just an HP 712/60, 712/80, or 712/100
workstation running HP-UX 9.x with a special application to control an
HP16500B or 16500C through a SCSI interface connection.
10:12 p.m.
New subject: Anyone know where to find software for an hp 16505a prototype analyzer?
Glen Slick wrote:
If anyone happens to have an OS install CD (I believe
that is
"reignite" in HP-UX terms) I'd like to get an .ISO image of that. I
have an HP 16505A with the software already installed but it would be
nice to be able to reinstall a fresh image on a bare hard drive.
Same here. I'd like the ISO image as well.
An HP 16505A is really just an HP 712/60, 712/80, or
712/100
workstation running HP-UX 9.x with a special application to control an
HP16500B or 16500C through a SCSI interface connection.
I want to use the 16505A with the logic analyzer, so I want the
actual 16505A software image, not generic HP-UX.
Thanks,
Eric
17 Apr
17 Apr
1:33 a.m.
New subject: Anyone know where to find software for an hp 16505a prototype analyzer?
Glen Slick wrote:
If anyone happens to have an OS install CD (I believe
that is
"reignite" in HP-UX terms) I'd like to get an .ISO image of that. I
have an HP 16505A with the software already installed but it would be
nice to be able to reinstall a fresh image on a bare hard drive.
By the way, the 16505A software install/upgrade requires booting from
a floppy, so we need the image of that too.
8:45 a.m.
On Thu, Apr 17, 2008 at 1:33 AM, Eric Smith <eric at brouhaha.com> wrote:
By the way, the 16505A software install/upgrade requires booting from
a floppy, so we need the image of that too.
Are you sure about that for the original 16505A software image
install? I never had a copy of the original 16505A software so I
don't know exactly how it is (re)installed. I know for the 16700
series you just boot directly from the CD and it installs the OS and
the everything.
I do have a "16505A CD INSTALL UTILITY" floppy disk for update
A.01.40, floppy part number 16505-17571, and a "Agilent 16505A
Prototype Analyzer System Software" CD A.01.40, part number
16505-14601, which does require the floppy, but the floppy was read by
the already installed software to start the update from the CD. As
far as I could determine the last time I looked at this CD there was
no way to install the OS and software from the CD on a bare system, it
was an update only.
12:22 p.m.
New subject: Anyone know where to find software for an hp 16505a prototype analyzer?
I wrote:
By the way, the 16505A software install/upgrade
requires booting from
a floppy, so we need the image of that too.
Glen Slick wrote:
Are you sure about that for the original 16505A
software image
install?
It's what I've been told, but I don't have any independent confirmation.
Eric
6094
days inactive
6095
days old
5 comments
3 participants
participants (3)
-
batata1＠free.fr -
eric＠brouhaha.com -
glen.slick＠gmail.com