< I would do that is I knew how. My memory board has several < jumpers and a couple of 8-switch dip switches but I have no doc on < the board so don't know memory settings. It is a 64K board so I < would assume I have a full address space. It is a N* RAM board < BTW. Can't help on that no docs for that board. < > Are they personalized for the machine and are all the port headers don < > the mother board set up correctly? Are the media the correct density < > the controller in use? < < Good question. These were sent to me by someone on the list. < The disks are 10 sectored (hard) double sided double density. The < controller is an N* Micro Disk Controller MDS-AD or that is all I can < see on it. The MDS-AD is a double density controller...ok there. Now the disks can be formatted as 48tpi or 96 tpi as the controller will support most 5.25 drives and if the drive is wrong... Personalizing, if they were set up for different IO they may not work on you NS*. < Any other tips to help out? Get docs! Your working blind without them. Allison