23 Sep
2004
23 Sep
'04
11:40 a.m.
Anybody know what this is for? Roughly 6 x 8"square with LEDs for D0
through D7 and A0 through A5. Also LEDs for -15VDC, +15VDC and +5VDC. Six
position DIP switch for setting the board address. Only connector is a 50
pin ribbon cable header. Keithly sells Metrabyte but neither Kiethly or
Metrabyte will give you any information. Good companies NOT to do business
with IMO.
Joe
25 Sep
25 Sep
3:35 a.m.
Searching the uk site for metrabyte pc6362 brings up a 2Mb acrobat file
which the search page says has a reference to pc6362.
Also a cross - reference table comes up in the faq's for old and new part
no's for their boards.
The adobe doc. is for the das-temp 32 channel temp. measuring board. - but I
couldn't see the reference in it.
http://www.keithley.co.uk/main.jsp?action=keithleysearch
http://www.keithley.co.uk/main.jsp?action=keithleysearch&searchType=vie…
ckPath=Document+Center&itemType=faq&role=&keywords=metrabyte+pc6362
Nothing in my Keithley book either.
Geoff.
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: <cctalk(a)classiccmp.org>
Sent: Thursday, September 23, 2004 9:40 PM
Subject: Metrabyte PC6362
Anybody know what this is for? Roughly 6 x
8"square with LEDs for D0
through D7 and A0 through A5. Also LEDs for -15VDC, +15VDC and +5VDC. Six
position DIP switch for setting the board address. Only connector is a 50
pin ribbon cable header. Keithly sells Metrabyte but neither Kiethly or
Metrabyte will give you any information. Good companies NOT to do business
with IMO.
Joe
7236
days inactive
7238
days old
1 comments
2 participants
participants (2)
-
geoffreythomas＠onetel.com -
rigdonj＠cfl.rr.com