9 May
9 May
8:47 p.m.
bought some,at a computer Faire in silicon val. that did not even have the buss and flag
goodies you see on that one.. had 20 wish I still had some more.. we used them to build
voice cards for 1000 systems using national digitalker... chip set and would haunch along
with heat treating furnaces...etc. ah memories! still have the 1st proto... talker card
here.. though having a limited vocab. the 2000 access that this card finally rested in
could say some rude stuff... trying to remember if we addressed itc as,a,pinch or a
printer ed www.smecc.org
Sent from AOL Mobile Mail
On Wednesday, May 9, 2018 Al Kossow via cctalk <cctalk at classiccmp.org> wrote:
https://www.ebay.com/itm/163039837440
obviously NOT used..
10 May
10 May
11:19 a.m.
On Wednesday, May 9, 2018 at 16:51, Al Kossow via cctech wrote:
This card also functions as the Privileged Interrupt Fence in RTE operating
systems to permit the use of privileged I/O drivers, such as the one for
the 12920A terminal multiplexer.
-- Dave
20 May
20 May
12:20 p.m.
I got it! Thanks Al, I had been looking for one of these for a while, but the few ones
that were available were at ridiculous prices. I wanted it mostly so I can reverse
engineer it and make more of them, and/or get some inspiration for an FPGA based I/O
board.
Marc
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of "cctalk at
classiccmp.org" <cctalk at classiccmp.org>
Reply-To: Al Kossow <aek at bitsavers.org>, "cctalk at classiccmp.org"
<cctalk at classiccmp.org>
Date: Wednesday, May 9, 2018 at 4:51 PM
To: "cctalk at classiccmp.org" <cctalk at classiccmp.org>
Subject: HP 2100 prototyping card
https://www.ebay.com/itm/163039837440
obviously NOT used..
2:30 p.m.
Marc? - Enjoy!?I? have the one? (we? built? up? from blank ) we had a? stack? and would?
add our on buss and flag? chips and? parts)? with all the added? voice synth? stuff..? ?I
do not think I will be attempting to build? anything to add on to? an hp-1000 or a? 2100
in the new? future.? Enjoy? it!? ?I? wish? we had? saved some of the? ?left over? blank
ones? we had? though? when I retired. you would? have been welcomed? to 9 of them.
?
In a message dated 5/20/2018 12:20:39 PM US Mountain Standard Time, cctalk at
classiccmp.org writes:
?
I got it! Thanks Al, I had been looking for one of these for a while, but the few ones
that were available were at ridiculous prices. I wanted it mostly so I can reverse
engineer it and make more of them, and/or get some inspiration for an FPGA based I/O
board.
Marc
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of "cctalk at
classiccmp.org" <cctalk at classiccmp.org>
Reply-To: Al Kossow <aek at bitsavers.org>, "cctalk at classiccmp.org"
<cctalk at classiccmp.org>
Date: Wednesday, May 9, 2018 at 4:51 PM
To: "cctalk at classiccmp.org" <cctalk at classiccmp.org>
Subject: HP 2100 prototyping card
https://www.ebay.com/itm/163039837440
obviously NOT used..
2181
days inactive
2192
days old
4 comments
4 participants
participants (4)
-
aek＠bitsavers.org -
couryhouse＠aol.com -
curiousmarc3＠gmail.com -
jdbryan＠acm.org