6 Feb
2002
6 Feb
'02
5:23 a.m.
On Feb 6, 6:13, Kris Kirby wrote:
On Wed, 6 Feb 2002, Dave McGuire wrote:
Not the shells (they're obsolete, unfortunately) but were part ofthe AMP
Mate-N-Lok Commercial range, the same as is used on 5.25" drive connectors.
You can still get the pin inserts and socket inserts, of course.
--
Pete Peter Turnbull
Network Manager
University of York
You don't need other hardware. I'd
send you the pinouts but I don't
remember them offhand.
Great. The occasion is that the gentleman with the PDP8 knows it counts
out of the console port, but doesn't have hardward to do so. I'm going to
give him a little gift. :)
Anyone know where I can get (2) of those 20MA male connectors? 
6 Feb
6 Feb
7:30 a.m.
On Wed, 6 Feb 2002, Pete Turnbull wrote:
On Feb 6, 6:13, Kris Kirby wrote:
Anyone have a link to a photo of these? I could see what might be lurking
in my parts cabinets...
-Toth
On Wed, 6 Feb 2002, Dave McGuire wrote:
Not the shells (they're obsolete, unfortunately) but were part ofthe AMP
Mate-N-Lok Commercial range, the same as is used on 5.25" drive connectors.
You can still get the pin inserts and socket inserts, of course. You don't need other hardware. I'd
send you the pinouts but I don't
remember them offhand.
Great. The occasion is that the gentleman with the PDP8 knows it counts
out of the console port, but doesn't have hardward to do so. I'm going to
give him a little gift. :)
Anyone know where I can get (2) of those 20MA male connectors? 
7:45 a.m.
--- Pete Turnbull <pete(a)dunnington.u-net.com> wrote:
On Feb 6, 6:13, Kris Kirby wrote:
One thing to watch for - pin diameter. I made my own connector for a
VT220 out of a pair of drive power connectors, and it works fine, but
I think the VT220 end got stretched - now that I have a real set of
TTY cables, they don't fit in my terminal. I tried to sort of compress
them back into place, but I think I'll have to remove the board and
remove the connector from the board before I can get clear access to the
pins. OTOH, I could try to make a pin squeezer out of tubing...
Anyone know where I can get (2) of those 20MA
male connectors?
Not the shells (they're obsolete, unfortunately) but were part ofthe AMP
Mate-N-Lok Commercial range, the same as is used on 5.25" drive
connectors. You can still get the pin inserts and socket inserts,
of course.
Got part numbers? I'm also looking for part numbers for Berg connector
bits - somewhere I have the tool that makes the same cables as DEC did
with the black Berg shells. What I lack is the female crimp-on "pins".
-ethan
__________________________________________________
Do You Yahoo!?
Send FREE Valentine eCards with Yahoo! Greetings!
http://greetings.yahoo.com
8358
days inactive
8358
days old
2 comments
3 participants
participants (3)
-
erd_6502＠yahoo.com -
pete＠dunnington.u-net.com -
tothwolf＠concentric.net