2 Nov
2000
2 Nov
'00
1:55 p.m.
From: Joe <rigdonj(a)intellistar.net>
Great. I'm looking forward to getting them. I
haven't found anything
that can read my SB-180 disks so I hven't been able to transfer the ZCPR
to
anything else yet. I think it would be cool to get it
running on a PC!
SB180 disks should read using standard PC FDC and the correct driver.
The problem is they did some weird sector layout but, the SB180 does
use a PC compatable controller (765 core). I can read my SB180 disks
on the Kaypro using 96tpi drives. It may be the disks you have are 48
tpi or they can be 96tpi (user option). I've migrated mine to 3.5"
drives.
I stuck out. I looked through my ZCPR docs and book
but none of them
tell what the differences are between ZCPR3 and ZCPR 2.2. "ZCPR, The
Manual" only gives the differences between ZCPR3 and CP/M 2.2. I don't
know anything about the earlier versions of ZCPR so I guess I'm no
help.
No real difference for the most part. ZCPR3 improved the install process
and added a few utilities.
Allison
3 Nov
3 Nov
2:24 a.m.
New subject: ZCPR & Other CP/M Extensions (Was: RE: CP/M 1.3 memory requirement)
At 10:55 PM 11/2/00 -0500, Allison wrote:
From: Joe <rigdonj(a)intellistar.net>
Mine has the 96 TPI drives. 22Disk is supposed to be able to read them
but for some reason it doesn't. I don't know if the previous owner modified
the OS so that the disk format is non-standard or what. I haven't had time
to dig into it yet.
MP/M. I'm making big progress on my Dolch system with the MPM. I
finally figured out that you can't just execute the file that controls the
pattern generator, you have to use one of the function keys that controls
the "slots". It runs the same file but the file crashes if you execute it
manually. ???? If I use the "slot" control keys, the file loads and loads
everything that's needed then I can access all the screens that control the
pattern generator. I haven't fooled with the logic analyzer yet but I
expect it operates the same way.
Joe
Great. I'm looking forward to getting
them. I haven't found anything
that can read my SB-180 disks so I hven't been able to transfer the ZCPR
to
anything else yet. I think it would be cool to
get it running on a PC!
SB180 disks should read using standard PC FDC and the correct driver.
The problem is they did some weird sector layout but, the SB180 does
use a PC compatable controller (765 core). I can read my SB180 disks
on the Kaypro using 96tpi drives. It may be the disks you have are 48
tpi or they can be 96tpi (user option). I've migrated mine to 3.5"
drives.
8815
days inactive
8816
days old
1 comments
2 participants
participants (2)
-
ajp166＠bellatlantic.net -
rigdonj＠intellistar.net