6 Nov
2019
6 Nov
'19
10:16 a.m.
I have the following 5-1/4" Drives that I would like to get rid of. These
have all been working at one time or another, but I have no idea what
condition they are in now.
Maxtor EXT 4330
Seagate ST4766N
Hitachi DK516-12
Maxtor XT-8760E
Maxtor XT-4170E
I also have the following QBUS cards to part with.
Module Number Part# Description Form
QBUS Extender D
M7504 DEQNA Ethernet D
M8043 DLV11 4xSLU D
M8043 DLV11 4xSLU D
M7941 DRV11 16 Bit Parallel D
M8186 KDF11 11/23 CPU D
M8186 KDF11 11/23 CPU D
M8189 KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8047 MXV11 ROM/RAM D
M7555 RQDX3 D
M8029 RXV21 RX02 Controller D
M7646 TQK50 Tape Controller D
M8044-DB Memory 16K 32K? D
M8044-DE Memory 16K 32K? D
DATARAM 63010 Q
Camington CMX1651 Memory Q
M7606-AF KA630 CPU Q
M7620-AA KA650 CPU Q
M7620-BA KA650 CPU Q
M7164 KDA50 SDI Controller Q
M7165 KDA50 SDI Controller Q
M5976-AA KZQSA SCSI Controller Q
M5976-AA KZQSA SCSI Controller Q
M8067 Memory Q
M7168 VCB02 Bit Map Q
M7169 VCB02 Controller Q
M7608-BP MS630BB 4-Meg Memory Q
M7608-BP MS630BB 4-Meg Memory Q
M7957 4xSLU Q
SCD-RQD11/EC ESDI Controller Q
All of these are FTAGH, but I wouldn't turn down a trade either. I'd be
interested in drive sleds for my BA123 or a spare power supply, also for
the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer
local pickup near Livermore, CA. I don't believe that the drives are
shippable.
Please contact me directly at <david at thecoolbears.org>
6 Nov
6 Nov
1:20 p.m.
Are you sure you won't ship the Maxtor ESDI drves?? I have a microvax 2
here just crying out for them. Unfortunately CA is a five day drive away
for me!
Nigel ve3id
On 06/11/2019 13:16, David Coolbear via cctech wrote:
I have the following 5-1/4" Drives that I would
like to get rid of. These
have all been working at one time or another, but I have no idea what
condition they are in now.
Maxtor EXT 4330
Seagate ST4766N
Hitachi DK516-12
Maxtor XT-8760E
Maxtor XT-4170E
I also have the following QBUS cards to part with.
Module Number Part# Description Form
QBUS Extender D
M7504 DEQNA Ethernet D
M8043 DLV11 4xSLU D
M8043 DLV11 4xSLU D
M7941 DRV11 16 Bit Parallel D
M8186 KDF11 11/23 CPU D
M8186 KDF11 11/23 CPU D
M8189 KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8047 MXV11 ROM/RAM D
M7555 RQDX3 D
M8029 RXV21 RX02 Controller D
M7646 TQK50 Tape Controller D
M8044-DB Memory 16K 32K? D
M8044-DE Memory 16K 32K? D
DATARAM 63010 Q
Camington CMX1651 Memory Q
M7606-AF KA630 CPU Q
M7620-AA KA650 CPU Q
M7620-BA KA650 CPU Q
M7164 KDA50 SDI Controller Q
M7165 KDA50 SDI Controller Q
M5976-AA KZQSA SCSI Controller Q
M5976-AA KZQSA SCSI Controller Q
M8067 Memory Q
M7168 VCB02 Bit Map Q
M7169 VCB02 Controller Q
M7608-BP MS630BB 4-Meg Memory Q
M7608-BP MS630BB 4-Meg Memory Q
M7957 4xSLU Q
SCD-RQD11/EC ESDI Controller Q
All of these are FTAGH, but I wouldn't turn down a trade either. I'd be
interested in drive sleds for my BA123 or a spare power supply, also for
the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer
local pickup near Livermore, CA. I don't believe that the drives are
shippable.
Please contact me directly at <david at thecoolbears.org>
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it
will pass across the public Internet, easily readable by any number of system
administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this message
2:08 p.m.
On Nov 6, 2019, at 4:20 PM, Nigel Johnson via cctech
<cctech at classiccmp.org> wrote:
Are you sure you won't ship the Maxtor ESDI drves? I have a microvax 2 here just
crying out for them. Unfortunately CA is a five day drive away for me!
Nigel ve3id
Drives are definitely shippable, and small drives like 5.25 inch ones shouldn't be a
big deal. Traditional shipping involves a sturdy box with a couple of inches of foam
inside holding the drive.
Avoid loose fill like "foam peanuts". I once received an RP06 pack that came in
a large box full of foam peanuts, but the pack had settled in the bottom corner and was
dented on that side.
paul
8 Nov
8 Nov
4:39 p.m.
I have a machine that needs these specific models of ESDI disk Nigel, I was hoping for
them.
Your Uvax can use plenty of different types.
Trying to facilitate transfer (I am speaking of only the Maxtor disks)
Sent from my iPhone
On Nov 6, 2019, at 13:45, Nigel Johnson via cctalk
<cctalk at classiccmp.org> wrote:
?Are you sure you won't ship the Maxtor ESDI drves? I have a microvax 2 here just
crying out for them. Unfortunately CA is a five day drive away for me!
Nigel ve3id
On 06/11/2019 13:16, David Coolbear via cctech
wrote:
I have the following 5-1/4" Drives that I would like to get rid of. These
have all been working at one time or another, but I have no idea what
condition they are in now.
Maxtor EXT 4330
Seagate ST4766N
Hitachi DK516-12
Maxtor XT-8760E
Maxtor XT-4170E
I also have the following QBUS cards to part with.
Module Number Part# Description Form
QBUS Extender D
M7504 DEQNA Ethernet D
M8043 DLV11 4xSLU D
M8043 DLV11 4xSLU D
M7941 DRV11 16 Bit Parallel D
M8186 KDF11 11/23 CPU D
M8186 KDF11 11/23 CPU D
M8189 KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8047 MXV11 ROM/RAM D
M7555 RQDX3 D
M8029 RXV21 RX02 Controller D
M7646 TQK50 Tape Controller D
M8044-DB Memory 16K 32K? D
M8044-DE Memory 16K 32K? D
DATARAM 63010 Q
Camington CMX1651 Memory Q
M7606-AF KA630 CPU Q
M7620-AA KA650 CPU Q
M7620-BA KA650 CPU Q
M7164 KDA50 SDI Controller Q
M7165 KDA50 SDI Controller Q
M5976-AA KZQSA SCSI Controller Q
M5976-AA KZQSA SCSI Controller Q
M8067 Memory Q
M7168 VCB02 Bit Map Q
M7169 VCB02 Controller Q
M7608-BP MS630BB 4-Meg Memory Q
M7608-BP MS630BB 4-Meg Memory Q
M7957 4xSLU Q
SCD-RQD11/EC ESDI Controller Q
All of these are FTAGH, but I wouldn't turn down a trade either. I'd be
interested in drive sleds for my BA123 or a spare power supply, also for
the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer
local pickup near Livermore, CA. I don't believe that the drives are
shippable.
Please contact me directly at <david at thecoolbears.org>
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you,
it will pass across the public Internet, easily readable by any number of system
administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this
message
6 Nov
6 Nov
1:41 p.m.
Are you sure you won't ship the Maxtor ESDI drves?? I have a microvax 2
here just crying out for them. Unfortunately CA is a five day drive away
for me!
Nigel ve3id
On 06/11/2019 13:16, David Coolbear via cctech wrote:
I have the following 5-1/4" Drives that I would
like to get rid of. These
have all been working at one time or another, but I have no idea what
condition they are in now.
Maxtor EXT 4330
Seagate ST4766N
Hitachi DK516-12
Maxtor XT-8760E
Maxtor XT-4170E
I also have the following QBUS cards to part with.
Module Number Part# Description Form
QBUS Extender D
M7504 DEQNA Ethernet D
M8043 DLV11 4xSLU D
M8043 DLV11 4xSLU D
M7941 DRV11 16 Bit Parallel D
M8186 KDF11 11/23 CPU D
M8186 KDF11 11/23 CPU D
M8189 KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8192-YB KDJ11 11/73 CPU D
M8047 MXV11 ROM/RAM D
M7555 RQDX3 D
M8029 RXV21 RX02 Controller D
M7646 TQK50 Tape Controller D
M8044-DB Memory 16K 32K? D
M8044-DE Memory 16K 32K? D
DATARAM 63010 Q
Camington CMX1651 Memory Q
M7606-AF KA630 CPU Q
M7620-AA KA650 CPU Q
M7620-BA KA650 CPU Q
M7164 KDA50 SDI Controller Q
M7165 KDA50 SDI Controller Q
M5976-AA KZQSA SCSI Controller Q
M5976-AA KZQSA SCSI Controller Q
M8067 Memory Q
M7168 VCB02 Bit Map Q
M7169 VCB02 Controller Q
M7608-BP MS630BB 4-Meg Memory Q
M7608-BP MS630BB 4-Meg Memory Q
M7957 4xSLU Q
SCD-RQD11/EC ESDI Controller Q
All of these are FTAGH, but I wouldn't turn down a trade either. I'd be
interested in drive sleds for my BA123 or a spare power supply, also for
the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer
local pickup near Livermore, CA. I don't believe that the drives are
shippable.
Please contact me directly at <david at thecoolbears.org>
--
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it
will pass across the public Internet, easily readable by any number of system
administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this
message
7 Nov
7 Nov
6:36 p.m.
On 11/6/19 12:16 PM, David Coolbear via cctech wrote:
M5976-AA KZQSA SCSI Controller Q
Hmm, I could sure use one of those...
I bought a bunch of QBus boards from my recycler quite some time ago, but
the systems that they'd been pulled from were run with SMD drives. Finding
a working SMD drive is something of a challenge, but SCSI at least opens up
possibilities of emulated storage (or real spinning rust, I may still have
a suitable drive or two, albeit currently on the other side of the Atlantic)
The two VCB02 boards have me intrigued, too :-)
cheers
Jules
8:54 p.m.
On Thu, Nov 7, 2019 at 6:36 PM Jules Richardson via cctech
<cctech at classiccmp.org> wrote:
On 11/6/19 12:16 PM, David Coolbear via cctech wrote:
An M5976 KZQSA is not an MSCP compatible controller. If I remember
correctly an M7626 KA660 VAX 4000-200 or better CPU is necessary to
boot from it, and the only OS that supports it is VMS, and only SCSI
CD-ROM drives are officially supported.
I have never tried to boot VMS from a SCSI hard drive attached to an
M5976 KZQSA, or tried to access a SCSI hard drive attached to an M5976
KZQSA after booting VMS from a different drive. I have only used them
for installing VMS from a CD-ROM on a VAX 4000, or for installing
layered products from a CD-ROM on any Q-Bus VAX after VMS is already
installed. For that limited purpose they work well.
M5976-AA KZQSA SCSI Controller Q
Hmm, I could sure use one of those...
I bought a bunch of QBus boards from my recycler quite some time ago, but
the systems that they'd been pulled from were run with SMD drives. Finding
a working SMD drive is something of a challenge, but SCSI at least opens up
possibilities of emulated storage (or real spinning rust, I may still have
a suitable drive or two, albeit currently on the other side of the Atlantic) 
8 Nov
8 Nov
1 a.m.
On Thu, Nov 7, 2019, 19:36 Jules Richardson via cctech <
cctech at classiccmp.org> wrote:
On 11/6/19 12:16 PM, David Coolbear via cctech wrote:
Be forewarned that a KZQSA isn't a "real" SCSI controller. It's
doesn't use
MSCP, and doesn't emulate any better-supported controller. It only is
intended to support a few specific tape drives and CD-ROM drives. It's
supported in some versions of VMS; I'm not sure about Ultrix.
I don't think it can be used as a boot device, though I'm less certain
about that.
M5976-AA KZQSA SCSI Controller Q
Hmm, I could sure use one of those...
1870
days inactive
1873
days old
7 comments
7 participants
participants (7)
-
david＠thecoolbears.org -
glen.slick＠gmail.com -
ian.finder＠gmail.com -
jules.richardson99＠gmail.com -
nw.johnson＠ieee.org -
paulkoning＠comcast.net -
spacewar＠gmail.com